A throttling calorimeter is used was used to determine the quality of steam supply. It was found that the pressure before and after the throttle were 1.1MPA and 0.11MPA respectively. The temperature after throttling was 115 °C. Determine the dryness fraction of the steam supply. For above pressures, determine the least dryness fraction the steam may have order that its value may determine. Take the specific heat of superheated steam as 2kJ/kg K. (0.936;0.95) 13.

A throttling calorimeter is used was used to determine the quality of steam supply. It was found that the pressure before and after the throttle were 1.1MPA and 0.11MPA respectively. The temperature after throttling was 115 °C. Determine the dryness fraction of the steam supply. For above pressures, determine the least dryness fraction the steam may have order that its value may determine. Take the specific heat of superheated steam as 2kJ/kg K. (0.936;0.95) 13.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Drow and explainthe use of vr data for calculating the final temperature during an isentropic process
Find the dryness fraction of a steam having a specific volume of 15 m3 /kg after expansion in a turbine. The specific volumes of saturated liquid and saturated vapor corresponding to the pressure are 0.001 m3 /kg and 15.25 m3 /kg, respectively.
A steam boiler of volume 2.3 m3 initially contained 1.7 m3 liquid water in equilibrium with 0.6 m3 of vapour at 100 kPa. The boiler is heated keeping the inlet and discharge valves closed. The relief valve is set to lift when the pressure in the boiler reaches 5500 kPa. Determine the amount of heat supplied to the contents in the boiler before the relief valve lifts.
Identify the condition of the steam at the following pressure and temperature: 1150 psia and 563°F A. wet-vapor mixture B. Superheated vapor C. Saturated liquid D. saturated vapor E. subcooled liquid F. Compressed liquid
Air is compressed in a compressor through the purely polytropic, purely isothermal, and intercooling as shown in the diagram between the same pressure limits. Select the area that indicates the work saved for the intercooling process comparing to the purely polytropic one _____________ A. 1-X'-2'-P2-P1-1 B. X-X'-2-2"-X C. 1-X-X'-2-P2-P1-1 D. 1-X'-2"-P2-P1-1
1. Saturated steam at a pressure of 25 psia is sprayed into a stream of moist air. The initial condition of the air is 55 dry-bulb temperature and 35 F de-point temperature. The mass rate of air flow is 2000 lb per min. Barometric pressure is 14.696 psia. Determine how much steam must be added in lb per min to produce a saturated air condition, b) the resulting temperature of the saturated air.
This link is for steam tables: https://1drv.ms/b/s!AvFGRwE60LNAaqAcZZFlgm2E4ks
Consider a sealed can that is filled with refrigerant134a. The contents of the can are at the room temperature of 25°C. Now a leak develops, and the pressure in the can drops to the local atmospheric pressure of 90 kPa. The temperature of the refrigerant in the can is expected to drop to (rounded to the nearest integer) (a) 0°C (b) –29°C (c) 16°C (d) 5°C (e) 25°C
Please indicate the given. Determine the optimal intermediate pressures and work needed per kilogram of gas for a three-stage compressor that must compress air between 120 kN/m2 and 288 K to 3800 kN/m2. It's likely that the compression is adiabatic, and that interstage cooling is being used to cool the air back to its initial temperature.
What is the enthalpy change during the process in which100.0 g of water at 50.0 °C is cooled to ice at -30.0 °C? (Usethe specific heats and enthalpies for phase changes given inSample Exercise 11.3.)
Explain the process of steam generation at constant pressure. Show the various stages on p-v, T-s and h-s diagram
VAPORIZATIONPROBB....................A c0mpressed air tank having a v0lume 0f 0.42m3 is filled with air at gauge pressure 0f 200psi and 27oC and saturated with water vap0r. The tank wasfilled by c0mpressing air at 14.5 psia at 24oC with 80% humidity. Calculate the weight 0f water vap0r c0ndensed.