A-Two impedances Zi and Z, are connected in parallel and the combination is connecting with series to third one. If the applied voltage is 100 with zero phase, Z, - 3+ j5 ohm, Z, - 2 +j3 ohm and the total impedance is equal to 7.34 +j 4.55 ohm, find: 1- Z: 2- Total current 3- Current through Za 4- Current through Zs

A-Two impedances Zi and Z, are connected in parallel and the combination is connecting with series to third one. If the applied voltage is 100 with zero phase, Z, - 3+ j5 ohm, Z, - 2 +j3 ohm and the total impedance is equal to 7.34 +j 4.55 ohm, find: 1- Z: 2- Total current 3- Current through Za 4- Current through Zs

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.45P: Two balanced Y-connected loads, one drawing 10 kW at 0.8 power factor lagging and the other IS kW at...

See similar textbooks

Similar questions

Find the following: the power drawn by the 100ohm variable resistor If the variable resistor is set to 200-ohms, instead of 100-ohms, What is the power drawn by the 200-ohms resistor? total current of the system Is the circuit inductive, capacitive, or neither (resistive)? NOTE: Polar form for Voltage & Current. Rectangular form for Impedance
Apply the delta-wye and wye-delta transformations in appropriate ac networks: For the circuit below, Es = 24<30 V Z₁ = 2 + j2 ohms Z₂ = 4 - j3 ohms Z3 = 6 + j8 ohms Z4 = 8 - j6 ohms Z5 = 10 - j10 ohms Z6 = j12 ohms Calculate the complex power in Z4. PS: Show complete/step-by-step solution without rounding off any numbers
What is the main direct cause of reactive power in AC system?A. Resistance of transmission linesB. Inductance and capacitance in the loadsC. Ideal transformer connected in the systemD. Power produced by generator2. “Reactive power in a system is dissipated generally as thermal energy?”A. TRUEB. FALSE3. Which of the following statements are correct for three phase circuit:A. Sum of all the three phase currents is zero in unbalanced networkB. Total power transfer to load is constant with timeC. Neutral conductor is same size in terms of material used as in single phase conductorsD. Net apparent power consumed is equal to real power
An alternating single phase circuit describes the instantaneous values of the applied voltage and the corresponding current as: v = 360 sin (201,69 t + π/6) and i = 36 sin (201,69 t - π/9) Calculate: the impedance, resistance and reactance of the circuit, the r.m.s.-values of the voltage and current, the true-, apparent- and reactive power in the circuit The time taken to reach -190 V for the second time. Sketch the phasor diagram of this circuit
A 400V three-phase, four wire system has the following loads connected: Phase 1: load impedance Z1 = 40 + j15 Ω Phase 2: load impedance Z2 = 60 Ω Phase 3: load impedance Z3 = 15 – j20 Ω I am just looking for the working out for phase 2 - please ignore the other phases The line and phase voltages for all phases (including phase angles) The line and phase currents for all phases (including phase angles) The neutral current (including phase angle)
Question oneA balanced star connected load comprises of 20 ohm resistance and 0.07 Henry inductance in each branch. If the load supplied with 415V at 50Hz, calculatea) the line currentb) the power factorc) the total power supplied to the load PLEASE FOLLOW THIS APPROACH TO SOLVE THE QUESTION. THANK YOUStep OneDeduce the inductive reactance.STEP TwoWrite down a rectangular expression for the impedance per branch.STEP ThreeConvert the rectangular expression into polar expression.STEP FourBecause impedance will be involved in the analysis deduce the phase voltage.STEP FiveSolve for the phase current and hence the line current.STEPVSixUse the phase angle of the current to deduce the power factor. STEP SevenFind the apparent power.
S1) The serial impedance per unit length of a three-phase 140 km power transmission line is 0.09 + j0.88 ohm/ km and its admittance is j4.1x10-6 S / km. Power factor under 210 kV interphase voltage from the end of this energy transmission line A power of 150 MVA, which is 0.85 back, is drawn. Using this transmission line data and the T equivalent circuit model, the line Calculate the head voltage (V1), current (I1) and load angle.
Consider the microgrid of Figure 3.66. A three-phase transformer, T1, israted at 500 kVA, 220 VY grounded/440 V delta, a transformerwith a reactance of 3.5%.Themicrogridis supplied from anAC bus of a PV generating station.The DC bus rated at 540 V.The distributionlineis 10mileslong and has a series impedance of 0.1 + j1.0 Ω per mile and local load of 100 kVA at 440 V. The microgrid is connected to the local power grid using a three-phase transformer T2, rated at 440 V Y grounded/13.2 kV delta,500 kVA with a reactance of 8%. Compute the per unitimpedance diagram of the microgrid system. Assume the voltage base of 13.2 kV on the local power grid side and kVA base of 500
Q2 In Industry, three Inductive loads, each of resistance R = 32 ohms and inductance L = 0.04 H are connected in Delta to a 425 V, F = 50 Hz, 3 phase supply. Find the following below: i) Phase Impedance, Zp = ii) Phase Voltage, Vp = iii) Phase current, Ip = !3! iv) Line current, I= iiv) The Total Power Consumed, P=
α=4 β=4For the adjacent circuit, Vab=(400+5β)V is given and the source part is balanced. Since it is known as ZAN=j2α Ω, ZBN= 3α Ω and ZCN=-j3α Ω, calculate the value of the current Ib by its angle, ignoring the impedances of the transmission lines.Can you please post your solutions, it's very important
Let a series RLC network be connected to a source voltage V, drawing a current I. (a) In terms of the load impedance Z = Z angleZ, find expressions for P and Q, from complex power considerations.(b) Express p(t) in terms of P and Q, by choosing i(t)= sqrt2*I* cos wt.(c) For the case of Z = R + jwL + 1 /jwC, interpret the result of part (b) in terms of P, QL, and QC. In particular, if w^2*LC=1, when the inductive and capacitive reactances cancel, comment on what happens.
A four-wire wye-wye circuit has voltage source as follows V_an=120∠120° V, V_bn=120∠0° V, and V_cn=120∠-120° V. If the impedances are Z_AN=20∠60° Ω, Z_BN=30∠0° Ω, and Z_CN=40∠30° Ω, find the current in the neutral line.