A volume flow of air at 500K, 20 bar passes in a long pipe through a temperature reservoir that is kept at a temperature of 1000°C. The air exits at 1000K and 1.8 MPa. Air as ideal gas with variable specific heats, R = 0.287 KJ/Kg-k

Q: The figure belows shows three components of an air-conditioning system, where T3= 115°F and m˙3= 1.5…

A: Given data:The temperature, T3 = 115 oF.The mass, ṁ3 = 1.5 lb/s.The specific heat of air, cp = 0.240…

Q: A steady flow device does 75 kW of work. The inlet conditions are P, = 1380 kPa, u, = 2710 kJ/kg, v,…

A:

Q: 6. A 1.5m3 tank containing a one-third kilogram of an unknown ideal gas is pressurized at 200 kPaa.…

A: This question is very unique and interesting question. This question can be solved by finding…

Q: There are 3 kg/min of steam undergoing an isothermal process from 30 bar and 350 °C to 7 bar. (note…

A: Given Data Initial temperature is: T1=350°C=623 K The initial pressure is: P1=30 bar=30×105 Pa The…

Q: 3.123 Air is confined to one side of a rigid container divided by a partition, as shown in Fig.…

A: for solution refer below images.

Q: A steam sample is removed from line where the pressure is 225 psia and passed through throttling…

A: Given data:

Q: 5. Two kilogram of certain gas with R = 0.218 kJ/kg-Kundergoes a process and results to the…

A:

Q: 3.1 kg/s of air expands through a turbine from 8 bar, 800 K to 1 bar, 400 K. The inlet velocity is…

A:

Q: 05: Air at 27"C receives heat at constant vo. 927°C. Determine the heat added per kilograr Assume…

A: Giveninitial temperature of the air Ti=27oCfinal temperature of the air Tf=927oCCV=0.718kJ/kgK

Q: 2.13 Air at 30°C and 2MPa flows at steady state in a horizontal pipeline with a velocity of 25 m It…

A:

Q: (10%) A rigid tank of 1 m3 contains nitrogen gas at 600 kPa, 400°K. By mistake, someone lets 0.7 kg…

A: As per given question  V1=1 m3 P1=600kpa T1=400k We have to determine Final pressure

Q: A perfect gas has a value of R = 319.2 J/kg-K and k = 1.26. If 120 kJ are added to 2.27 kg of this…

A:

Q: 3.52 WP A piston-cylinder assembly contains 1kg of water, ini- tially at 700 kPa in series: a…

A:

Q: the volume at state 1. the air mass per cycle. the heat addition per cycle, in kJ. the heat…

A: Heat Added = mass X sp. heat at constant volume  X temp difference

Q: Steam at 4.56MPa, 300C undergoes an isochoric process its dryness faction becomes 80% at 0.6MPa.…

A:

Q: An Isobaric process is done on steam where it is heated to 200 C at 1.1 MPa. It was initially a…

A:

Q: There are 2.27 kg/min of steam undergoing an isothermal process from 27.5 bar, bar. Determine the…

A: “Since you have posted a question with multiple sub-parts, we will solve first three subparts for…

Q: Refrigerant 134a undergoes a poly tropic process in a Piston- cylinder assembly from an initial…

A: Given data as per question Initial pressure =2 bar Final pressure =12 bar Find temperature =800c…

Q: One pound of an ideal gas undergoes an isentropic process from 95.3 psig and a volume of 0.9ft to a…

A: As per our guidelines we are supposed to solve only 3 subparts if multiple subparts are asked.…

Q: 7. Through an isentropic process, a piston compresses 2 kg of an ideal gas at 150 kpa and 35 °C in a…

A:

Q: Ex. 4 Superheated water Vapor enters a valve at 3 MPa . 320 c and exits at a pressure of o5 M Pa.…

A: Write the properties of superheated water vapor at the entry ( 3 MPa and 320 oC ) of the valve.…

Q: P,= P , Volume v, ge in internal Energy is equals to change in heat transfer alue of the work done…

A:

Q: 1. During a reversible process 320 kJ/s of heat are given off by 1.5 kg m /s of a certain gas while…

A: Answer: 1. (a) Final Volume: V2 = 0.10113 m3/s , (b) Non-flow work: W = -320 kJ/s , (c) ∆S =…

Q: From a state defined by 285.3 psig, 100ft3 and 240F, helium (R=386.04 ft-lbf/lbm-R, k=1.666)…

A:

Q: Twenty m/hr of air at 600 kPa, 330 Kenters a well-insulated, horizontal pipe having a diameter of…

A: GivenPressure at inlet P1=600kpaTemp at inletT1=330kPressure at exitP2=120kpad1=1.2cmTo find:-Exit…

Q: 40 m3 of air (R=0.287), at a gage pressure of 20kPa, and a temperature of 27 °C. then the specific…

A: 40 m3 of air (R=0.287), at a gage pressure of 20kPa, and a temperature of 27 °C. then the specific…

Q: Plot the data and how you got the data (process how you used the diagram) to determine the items…

A:

Q: Initially, at 150 °C, 350 kPa, there is 1 kg of steam in a fixed volume vessel. Up to 645 kJ of heat…

A: Given: Initial temperature of the steam→Ti=150°C=423.15K Initial pressure of the steam→Pi=350 KPa…

Q: Air is contained in a pistom final state. For each of the process to occur adiabatica process (use…

A: INTRODUCTION:   A process in which no heat exchange  between system and surrounding, it means no…

Q: Air exits a turbine at 250 kPa and 150°C with a volumetric flow rate of 7,000 liters/s. Modeling air…

A: Given data as per question Exit pressure =250 kpa Exit temperature =1500 c =423 k Volumetric flow…

Q: There are 3 kg/min of steam undergoing an isothermal process from 30 bar and 350 o C to 7 bar. (note…

A: Given Data  Initial temperature, T1=350.C=625K Initial pressure, P1=30 bar =30(105Pa) Final…

Q: A spherical research balloon is filled with air at 8 bar and 120 deg.C and has a volume of 1 m3, it…

A: Calculate heat rejected in kJ . And diameter of spherical balloon after cooling in meter.

Q: Refrigerant R-134a at 200 kPa and 10 ⁰C enters an adiabatic diffuser steadily with a velocity of 600…

A: Given:-Inlet:T1=10°CP1=200 kPaV1=600 m/sOutlet:T2=150°CP2=10 barTo find:-a) The exit velocity b) The…

Q: Air exits a turbine at 250 kPa and 150°C with a volumetric flow rate of 7,000 liters/s. Modeling air…

A:

Q: 6. 0.09 m' of a fluid at 0.7), bar are compressed reversibly to a pressure of 3.5 bar according to a…

A:

Q: Q2:In a jet engine a flow of air at 800 K 150 kPa and 30 m/s enters a nozzle, where the air exits at…

A: Given Data  Inlet temperature, T1=800K Inlet pressure, P1=150KPa Speed of the inlet air, V1=30 m/s…

Q: 5. Two kilogram of certain gas with R 0.218 kJ/kg-Kundergoes a process and results to the following…

A:

Q: (QA2) Air is fed to a perfectly insulated turbine at 6 bar and exits the turbine at 1 bar and 300 K.…

A:

Q: Use steam tables. An industrial sized boiler, operates at a pressure of 20 bar. Saturated liquid…

A:

Q: A rigid, well-insulated tank of volume 2 m3 is initially evacuated. At time t = 0, air from the…

A: hi please find solution to your problem

Q: An automobile tire initially contains 0.25lb of air at 30psig, 70F and has an automatic valve that…

A:

Q: Thermodynamics subject. Pleas show the complete and step by step solution. . A certain gas at…

A:

Q: Q3//a steam turbine develops 3000 kW when the steam is supplied at 10 bar, 250 °C. The vacuum…

A:

Q: steam enters a steam engine art 2 mpa and 200 °C and exit at oI Mpa. steam consumption is 1500…

A:

Q: (QA2) Air is fed to a perfectly insulated turbine at 6 bar and exits the turbine at 1 bar and 300 K.…

A:

Q: A 10.0-m^3 tank contains steam at 275°C and 15.0 bar. The tank and its contents are cooled until the…

A: Given data: The volume of the tank is V=10 m3 The initial temperature of the steam is T1=275°C The…

Q: Air exits a turbine at 150 kPa and 150°C with a volumetric flow rate of 4,000 liters/s. Modeling air…

A:

Q: One cubic meter of oxygen at initial pressure of 1 bar and a temperature of 17°C are compressed…

A:

Entropy

In physics, entropy means the amount of disorder or the degree of randomness associated with a thermodynamic system. The system is not self-organized when the entropy of the system is high. For instance, when a system is at an elevated temperature, its molecules are in random motion, vibrating and colliding with each other. During this scenario, the probability of finding a molecule at a particular place twice, is low. Under this circumstance, the system can be said to be in a high entropy.