A wastewater treatment plant has been operating with the following specifications:flow rate = 7,630 m3/d, aeration tank volume = 1,270 m3, mixed liquor volatile suspendedsolids = 2,600 mg/l. The soluble BOD in the plant influent used to be 133 mg/l, but hasrecently changed to 222 mg/l. What is the new MLVSS this plant should use to maintain thesame F/M ratio as before? (Ans. Xnew = 4,340 mg MLVSS/l)

A wastewater treatment plant has been operating with the following specifications:flow rate = 7,630 m3/d, aeration tank volume = 1,270 m3, mixed liquor volatile suspendedsolids = 2,600 mg/l. The soluble BOD in the plant influent used to be 133 mg/l, but hasrecently changed to 222 mg/l. What is the new MLVSS this plant should use to maintain thesame F/M ratio as before? (Ans. Xnew = 4,340 mg MLVSS/l)

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A coagulation treatment plant with a flowrate of 0.05 m3/s doses with ferric sulfate at 20.0 mg/L. No other chemicals are added. The raw water suspended solids concentration is 36 mg/L. The effluent suspended solids concentration is 1.0 mg/L. The sludge solids content is 1.05%. The specific gravity of the sludge solids is 2.5. What volume of sludge is produced each day?
Working for the local wastewater treatment plant, you are asked by the labtechnician to help her set up BOD5 tests. The issue here is what dilution to use to get the BOD5 test to give an acceptable result. Of course, you do not know the actual BOD5 value, but you are able to determine from past tests that the total ultimate BOD (NBOD + L0) of the wastewater is546 mg/L and the organic Nitrogen (TKN) concentration of the wastewater is 32 mg N/L. You also know that the first order rate constant for the BOD test is 0.25 day-1. When you ask, the technician tells you that the normal DO concentration at the start of the test is 8.3 mg/L.Based on all this information, tell the lab technician which of the following wastewater sample volumes added to a standard BOD test bottle (300 mL) is going to produce an acceptable final result: 1 mL/3 mL/9 mL/30 mL/90 mL NOTE: Acceptable BOD test should comply with the two essential criteria: DOfinal ≥ 2 mg/L and DOinitial – DOfinal ≥ 2 mg/L.
5 ml wastewater is added to a 333 ml BOD flask. The initial dissolved O2 concentration was 13 mg/l and final dissolved O2 concentration was 4 mg calculate the BOD?
A coagulation treatment plant with a flow of 0.5 m3/s is dosing alum at 20 mg/l. Concentration of suspended solid is 25 mg/l. The effluent suspended solid concentration is 12 mg/l. The sludge content is 1 % and specific gravity of sludge is 3 %. What volume of sludge must be disposed of each day?
A wastewater with a BOD of 25mg/L is discharged through an outfall to a freshwater stream of mean velocity 0.1m/s. The DO downstream of the outfall is 8.5mg/L. Assume the deoxygenation rate is 0.25/d, the reaeration rate is 0.4 /d and the temperature of 20 degree C (DOs = 9.09mg/L). Compute for the ff: a) Critical distance b) minimum DO c) Oxygen deficit d) Critical time
a. The wastewater from a manufacturing treatment plant is discharged to a municipal `treatment plant for processing with domestic wastewater. The characteristics of the wastewater from the manufacturing treatment plant are 3500 mg/l BOD, 4500 mg/l SS, 70 mg/l nitrogen and 2 mg/l phosphorous. The characteristics of the domestic wastewater are 350 mg/l BOD, 285 mg/l SS, 50 mg/l N and 11 mg/l P. If the required BOD/N/P weight ratio is 100/5/1, what is the minimum quantity of domestic wastewater required per 1000 gallons of manufacturing wastewater to provide adequate nutrients for biological treatment and the concentration of SS in the combined wastewater? b. What additional of NH4OH and H3PO4 would be required in pounds per million gallons of wastewater to provide the necessary nutrient levels for the treatment of the manufacturing wastewater described above (a) if the domestic wastewater had not been combined with it.
Subject: EnvironmentalPrepare a sketch of a simple wastewater treatment process. Indicate the impurities removed in every stage.
A municipal waste water has a BOD5 of 200 mg/L at 20 ˚C. The reaction rate constant k at 20 ˚C is 0.23 day-1.[5] a. calculate the ultimate CBOD.[5] b. calculate BOD5 at 15 ˚C.
The results of a jar test on a surface water supply sample revealed that the optimum dose of alum (Al2(SO4)3.14H2O) as coagulant is 17 mg/L. Furthermore, the water has total alkalinity = 50 mg/L as CaCO3; pH = 7.8; and residual turbidity at optimum alum dose = 4 NTU. The water treatment plant has a mean flow of 10m3/hour. Determine: The kg of alum per year needed in the operation of the plant. The residual alkalinity in the sample, following the addition of alum at optimum dose. Solve parts (a) and (b) if instead of alum, ferric chloride (FeCl3) were used as coagulant. Assume the numerical jar test results are the same as those with alum.
The quantity of sludge produced from an aeration tank is 2,453 kg/day. The volume of the aeration tank is 8,500 m3 and the yield is 0.55 mg VSS/mg BOD5. The water retention time is 1 day and the inlet BOD5 is 540 mg/L. Calculate the outlet BOD5 in the tank?
A reactive chemical disposed of by dilution in a river dissipates at a uniform rate of 0.15 mg/lper hour. The waste discharge is 7 million gallons per day containing 35 mg/l, while thestream has zero concentration with a flow above the sewer outfall of 102 ft3/s. If the meanvelocity in the river is 0.8 ft/s, calculate the distance downstream that the chemical residual persist.
A municipal wastewater treatment plant is installing completely mixed activated sludge to meet their NPDES permit of 15 mg/L BOD5. The mixed liquor concentration is 1,000 mg/L MLVSS. The wastewater flowrate going to secondary treatment is 0.170 m3/s and the BOD5 in that stream is 110 mg/L. Laboratory measurements of the growth constants show: Ks = 60 mg/L BOD5, um = 2.8 d-1, kd = 0.05 d-1, Y = 0.73 mg MLVSS/mg BOD5. Determine the required volume of the aeration tank.