A wheel with a radius of 1 meter is initially spinning with an angular velocity of 10 rotations perminute. A break is applied to the edge of the wheel which causes it to slow the rate of its spinwith constant acceleration.a. If the rate of angular acceleration is -5 rad/s², how many seconds pass between the time thebreak is applied, and the wheel turns another 720 degrees?b. At that same instant (when the wheel with the break applied has just turned 720 degrees), whatis the centripetal (radial) acceleration of a point on the edge of the wheel?

Note:- This question with above values can't be determined i.e. question has to be asked with…

A wheel with a radius of 1 meter is initially spinning with an angular velocity of 10 rotations per minute. A break is applied to the edge of the wheel which causes it to slow the rate of its spin with constant acceleration. a. If the rate of angular acceleration is -5 rad/s, how many seconds pass between the time the break is applied, and the wheel turns another 720 degrees? b. At that same instant (when the wheel with the break applied has just turned 720 degrees), what is the centripetal (radial) acceleration of a point on the edge of the wheel?

A wheel with a radius of 1 meter is initially spinning with an angular velocity of 10 rotations per minute. A break is applied to the edge of the wheel which causes it to slow the rate of its spin with constant acceleration. a. If the rate of angular acceleration is -5 rad/s, how many seconds pass between the time the break is applied, and the wheel turns another 720 degrees? b. At that same instant (when the wheel with the break applied has just turned 720 degrees), what is the centripetal (radial) acceleration of a point on the edge of the wheel?

University Physics Volume 1

18th Edition

ISBN:9781938168277

Author:William Moebs, Samuel J. Ling, Jeff Sanny

Publisher:William Moebs, Samuel J. Ling, Jeff Sanny

Chapter10: Fixed-axis Rotation

Section: Chapter Questions

Problem 49P: A wind turbine is rotating conterclockwise at 0.5 rev/s and slows to a stop in 10 s. Its blades are...

See similar textbooks

Similar questions

Integrated Concepts An ultracentrifuge accelerates from rest to 100,000 rpm in 2.00 min. (a) What is its angular acceleration in rad/s2? (b) What is the tangential acceleration of a point 9.50 cm from the axis of rotation? (c) What is the radial acceleration in m/s2 and multiples of g of this point at full rpm?
A wind turbine is rotating conterclockwise at 0.5 rev/s and slows to a stop in 10 s. Its blades are 20 m in length. (a) What is the angular acceleration of the turbine? (b) What is the centripetal acceleration of the tip fo the blades at t=0s ? (c) What is the magnitude and direction of the total linear acceleration of the tip of the blades at t=0s ?
An ultracentrifuge accelerates from to 100,000 rpm in 2.00 min. (a) What is the average angular acceleration in rad/s2 ? (b) What is the tangential acceleration of a point 9.50 cm from the axis of rotation? (c) What is the centripetal acceleration in m/s2 and multiples of g of this point at full rpm? (d) What is the total distance travelled by a point 9.5 cm from the axis of totation of the ultracentrifuge?
During a 6.0-s time interval, a fly-wheel with a constant angular acceleration turns through 500 radians that acquire an angular velocity of 100 rad/s. (a) What is the angular velocity at the beginning of the 6.0 s? (b) What is the angular acceleration of the fly-wheel?
Jeff, running outside to play, pushes on a swinging door, causing its motion to be briefly described by = t2 + 0.800 t + 2.00,where t is in seconds and is in radians. At t = 0 and at t = 1.50s, what are the a. angular position, b. angular speed, and c. angularacceleration of the door?
The dung beetle is known as one of the strongest animals for its size, often forming balls of dung up to 10 times their own mass and rolling them to locations where they can be buried and stored as food. A typical dung ball formed by the species K. nigroaeneus has a radius of 2.00 cm and is rolled by the beetle at 6.25 cm/s. (a) What is the rolling balls angular speed? (b) How many full rotations are required if the beetle rolls the ball a distance of 1.00 m?
Microwave ovens rotate at a rate of about 6 rev/min. What is this in revolutions per second? What is the angular velocity in radians per second?
A bicycle tire is spinning clockwise at 2.50 rad/s. During a time period t = 1.25 s, the tire is slopped and spun in the opposite (counterclockwise) direction, also at 2.50 rad/s. (Calculate (a) the change in the tires angular velocity and (b) the tire's average angular acceleration av.
A rope of negligible mass is wrapped around a 225 kg solid cylinder of radius 0.400 m. The cylinder is suspended several meters off the ground with its axis oriented horizontally, and turns on that axis without friction, (a) If a 75.0-kg man takes hold of the free end of the rope and falls under the force of gravity, what is his acceleration? (b) What is the angular acceleration of the cylinder? (c) if the mass of the rope were not neglected, what would happen to the angular acceleration of the cylinder as the man falls?
The angular position of a rod varies as 20.0t2radians from time t=0 . The rod has two beads on it as shown in the following figure, one at 10 cm from the ratation axis and the other at 20 cm from the rotation axis. (a) What is the instantaneous angular velocity of the rod at t=5s ? (b) What is the angular acceleration of the rod? (c) What are the tangential speeds of the beads at t=5s ? (d) What are the tangential acceleration of the beads at t=5s ? (e) What are the centripetal accelerations of the beads at t=5s ?
A compact disc rotates at 500 rev/min. If the diameter of the disc is 120 mm, (a) what is the tangential speed of a point at the edge of the disc? (b) At a point halfway to the center of the disc?
Keratinocytes are the most common cells in the skins outer layer. As these approximately circular cells migrate across a wound during the healing process, they roll in a way that reduces the frictional forces impeding their motion. (a) Given a cell body diameter of 1.00 105 m (10 m), what minimum angular speed would be required to produce the observed linear speed of 1.67 107 m/s (10 m/min)? (b) How many complete revolutions would be required for the cell to roll a distance of 5.00 103 m? (Because of slipping as the cells roll, averages of observed angular speeds and the number of complete revolutions are about three times these minimum values.)