A. Tha power factor of a squirrel cage induction motor is5 The kddy current loss in an AC electrie motor is 100 watts at 50 Hz. Its loss at 100... at light load only.Hz will be..3- The potor power output of a 3-phase induction motor is 15 KW and corresponding slip is 4%The rotor copper loss will be...4- The resistahce representing mechanical output in the equivalent circuit of an induction motor

Note: Since you have not specified any question to be answered, as per our honor code, we are…

A. The power factor of a squirrel cage induction motor is .... at light load only. 2. The eddy current loss in an AC electric motor is 100 watts at 50 Hz. Its loss at 100 Hz will by.. 3- The yotor power output of a 3-phase induction motor is 15 KW and corresponding slip is 4%. The rotor copper loss will be... 4- The resistahce representing mechanical output in the equivalent circuit of an induction motor

A. The power factor of a squirrel cage induction motor is .... at light load only. 2. The eddy current loss in an AC electric motor is 100 watts at 50 Hz. Its loss at 100 Hz will by.. 3- The yotor power output of a 3-phase induction motor is 15 KW and corresponding slip is 4%. The rotor copper loss will be... 4- The resistahce representing mechanical output in the equivalent circuit of an induction motor

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

The air-gap flux density of a two-pole induction motor is given by B=Bm cos(ωt−θ)where Bm is the peak flux density, θ is the angular displacement around the air gap, and we have assumed clockwise rotation. Give the corresponding expression for the flux density of a four-pole induction motor; of a six-pole induction motor.
Type your question here Prove that the power developed by a three-phase induction motor is maximum when the equivalent load resistance RL is equal to the magnitude of the standstill impedance of the motor Zol. Then find the maximum power and slip at which occurs.
Design and develop equivalent circuit model of a single phase Induction motor with th consideration of core losses present with the parameter consideration of stator resistance R1 and reactance X1 and two rotor parameters which includes r2,x2 and magnetising reactance xm. (Illustration is required) Draw by hand please
base on below mentioned Comparison of the performance indexes discuss and advice best induction motor.
A three-phase, 460-V, 60-Hz, four-pole Y-connected induction motor has the following equivalent circuit parameters: Rs = 0.42Ω, Rrʹ = 0.23Ω, Xs = Xrʹ = 0.82Ω, and Xm = 22Ω. The no-load loss 60W, may be assumed constant. The rotor speed is 1750 rpm. The rotational losses at this speed is 500W. Use the approximate equivalent circuit in figure below, to determine (a) the synchronous speed Ns; (b) the slip s; (c) the input current Ii; (d) the input power Pi; (e) the input PF of the supply, PFs; (f) the gap power Pg; (g) the rotor copper loss Pru; (h) the stator copper loss Psu; (i) the developed torque Td; (j) the efficiency; (k) the starting current Irs and starting torque Ts; (l) the slip for maximum torque sm; (m) the maximum developed torque in motoring, Tmm
A three-phase induction motor, operating at rated voltage and frequency, has a startingtorque of 1.35 times and a maximum torque of 2.2 times, both with respect to its rated-loadtorque. Ignoring the effects of the stator resistance and rotational losses and assumingconstant rotor resistance, determine the slip rated load, and the rotor current at starting (as a percentage of the rotor current at rated load). The slip at maximum torque is 0.343 if that helps.
A three-phase induction motor, at rated voltageand frequency, has a starting torque of 140 percentand a maximum torque of 210 percent of full-loadtorque. Neglect stator resistance and rotational lossesand assume constant rotor resistance. Determinea. The slip at full load.b. The slip at maximum torque.c. The rotor current at starting as a percentage offull-load rotor current.
The full load slip of a 4-pole, 60Hz, 440V (line-to-line) three phase induction motor is 0.05. (i). What is the speed of the rotating stating? What is the frequency (in Hz) of the rotor current? (ii). When the output power of the motor is 90 hp at a speed of 1732 rmp, rotational losses (which include frictional and core losses) are 10,100W, while copper losses for both the rotor and stator total 3700W. Determine the motor efficiency and line current, assuming the motor has a 0.8pf lagging under the conditions.
For a three-phase induction motor connected in star (Y) configuration and operating on a frequency f Hz network with a phase voltage V1 V, slip s, and power factor cosϕ, we have approximate relationships that are valid near the nominal operating point for the phase current I1 A, and for the electromagnetic torque T Nm in relation to the mechanical speed nmech rpm. The torque is given by T=−4.667⋅nmech+7000 and the phase current by I1=−nmech+1500. The motor's total losses are Pα,mech W. The core losses and distributed losses are neglected. Given f=50 Hz, V1=380 V, s=0.035,cosϕ=0.97, and mechanical losses Pα,mech=550.Find me the angular velocity
A three-phase 60 Hz induction motor connected to a three-phase bus at rated voltage isoperating at a low slip condition (i.e s < 20%) resulting in a steady state speed of 1090 rpm.(a) How many poles does the motor have?(b) What is the percentage slip at the operating speed?(c) What is the corresponding frequency, (fr) of the currents and voltages induced in therotor winding?
18. A single-phase, 120 V, 60 Hz, four-pole, split-phase induction motor has the following standstill impedances:Main winding: Zm =5+j6.25Auxiliary winding: Za =8+j6a) Determine the value of capacitance to be added in series with the auxiliary winding to obtain maximum starting torque.b) Compare the starting torques and starting current with and without the added capacitance in the auxiliary winding circuit when operated from a 120V, 60Hz supply.
6. The relation between the field current and the armature current in an alternator with the armature short-circuited can be shown byA. a rated-current 80% pf saturation curve.B. a synchronous impedance curve.C. an open-circuit saturation curve.D. a zero-power-factor regulation curve.