age Please round to the nearest One (i.e., 1). Calculate the compacted cubic yards per hour if a compactor with a 6 ft drum width travels at 4 miles per hour over a 6 in lift of aggregate base course with 3 passes required to meet density specifications. 1. Calculate the compacted cubic yards per hour : = 2. Calculate the compacted cubic yards per hour at Poor operating conditions = Next page

age Please round to the nearest One (i.e., 1). Calculate the compacted cubic yards per hour if a compactor with a 6 ft drum width travels at 4 miles per hour over a 6 in lift of aggregate base course with 3 passes required to meet density specifications. 1. Calculate the compacted cubic yards per hour : = 2. Calculate the compacted cubic yards per hour at Poor operating conditions = Next page

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

The crushed stone output from a 36-by 42-in. crusher, with a closed opening of 2 ½ in (output is 50 tph)., is passed over a single horizontal vibrating screen with 1 ½ in. openings. If the permissible screen efficiency is 90%, use the information from Peurifoy to determine the minimum-size screen, expressed in square feet, required to handle the output of the crusher. please show complete solution use 4 decimal places
For a given sieve analyis: No. 4 - % finer 99%, for No. 200 -%finer 76. LL=60, PL= 32. Classify the soil using USCS. Justify your answer. provide fbd a.CL b.CH c.MH d.0OL
Base course aggregate has a target dry density of 119.7 lb/cu ft in place. It will be laid down and compacted in a rectangular street repair area of 2000 ft * 48 ft * 6 in. The aggregate in the stockpile contains 3.1% moisture.If the required compaction is 95% of the target, how many tons of aggregate will be needed?
For a given sieve analyis: No. 4 - % finer 99%, for No. 200 -%finer 76. LL=60, PL= 32. Classify the soil using USCS. Justify your answer. a.CH b.MH c.CL d.OL
For a given sieve analyis: No. 4 - % finer 99%, for No. 200 -%finer 76. LL=60, PL=32. Classify the soil using USCS. Justify your answer. O a. MH O b. CH O c. OOL O d. CL
Base course aggregate has a target dry density of 1917 kg/m3 in place. It will be laid down and compacted in a rectangular street repair area of 600 m X 15 m X 0.15 m. The aggregate in the stockpile contains 3.1% moisture. If the required compaction is 95% of the target, how many tons of aggregate will be needed?
A contractor needs 403 m3 of aggregate material for a highway construction project. The required dryunit weight of the compacted fill is 20.82 kN/m3. The aggregate material is available at a local supplyyard and is sold by measuring in tons and not by volume. The moisture content of the stock is 7%. Thecost of the aggregate material per ton is 60.B.1.1 Determine the amount of water present in the aggregate stock of the local supplyyard.B.1.2 Determine the amount of aggregate material the contractor should purchase in tonsto have exactly the correct volume of compacted material.B.1.3 Estimate the total cost the contractor has to bear for the purchase of the material.
Suppose that you are a Project Engineer on a Dam project. The volume of soil required at the dame site is Vd=100,000m3. The final void ratio (ed) is 0.80. Your boss, the Project Manager delegates to you the important decision of buying the earth fill from one of three suppliers. • Supplier X sells fill at OMR. 0.200/m3 with e = 0.90• Supplier Y sells fill at OMR. 0.120/m3 with e = 2.00• Supplier Z sells fill at OMR. 0.150/m3 with e = 1.60Evaluate and select the best supplier based on your knowledge about soil compaction.
Downvote for the wrong answers Tamping foot compactors with an optimal production of 428 ccy/hr will be used to compact a 75,000 ccy fill. The shrinkage factor of the soil being used is 0.83. A single scraper with an optimal production of 510 bcy/hr will be used to haul the soil to the fill. a. How many compactors should be used to maintain the scraper's production? b. The compactors being used for this operation cost $90/hr while the scraper costs $110/hr. Assuming a 45-min hour efficiency for all equipment, what will the total cost of this operation be?
You have been hired as a project Engineer for a development company in Namugongo to build 610 housing units. Since the original ground is low, you need fill material to raise the ground level. Your estimated fill requirements are 700,000m3 with a void ratio of 0.46. the insitu material at the borrow pit has a void ratio of 0.39 where as the material dumped in trucks has a void ration of 0.71. How many trucks will you need, if each truck carries 10m3? i will need all the work outs in full and well explained
Describe about the Applications of compaction grouting.
Write on the following Test. CBR Test. Compaction Test. Atterberg Test.