Air flows isentropically from a large reservoir maintained at 597°C and 1.0 MPa absolute into a converging-diverging duct. The flow at the exit plane of diverging duct is supersonic. The duct is 2 m long and has a circular cross sectional area with radius, r in m that varies in axial distance, x along the duct that is defined by r = 0.03x² +0.02 where x extends from -1.0 m to 1.0 m. (a) Sketch a 2D diagram of the above system on a graph of duct radius against axial distance with appropriate labelling. (b) Using the isentropic table provided, determine (i) the Mach number, pressure and temperature at the exit plane, and (ii) the mass flow rate through the duct. E.Q2 (c) If the radius of the duct as specified in E.Q2 is doubled, would the Mach number on the exit plane be increased, decreased or remain unchanged? Explain your answer briefly. Take heat specific ratio of 1.4 and specific gas constant of 0.287 kJ/(kg.K) for air.

Air flows isentropically from a large reservoir maintained at 597°C and 1.0 MPa absolute into a converging-diverging duct. The flow at the exit plane of diverging duct is supersonic. The duct is 2 m long and has a circular cross sectional area with radius, r in m that varies in axial distance, x along the duct that is defined by r = 0.03x² +0.02 where x extends from -1.0 m to 1.0 m. (a) Sketch a 2D diagram of the above system on a graph of duct radius against axial distance with appropriate labelling. (b) Using the isentropic table provided, determine (i) the Mach number, pressure and temperature at the exit plane, and (ii) the mass flow rate through the duct. E.Q2 (c) If the radius of the duct as specified in E.Q2 is doubled, would the Mach number on the exit plane be increased, decreased or remain unchanged? Explain your answer briefly. Take heat specific ratio of 1.4 and specific gas constant of 0.287 kJ/(kg.K) for air.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Consider an infinitely thin flat plate with a 1 m chord at an angle of attackof 10◦ in a supersonic flow. The pressure and shear stress distributions onthe upper and lower surfaces are given by pu = 4 × 104(x − 1)2 +5.4 × 104, pl = 2 × 104(x − 1)2 + 1.73 × 105, τu = 288x−0.2, andτl = 731x−0.2, respectively, where x is the distance from the leading edgein meters and p and τ are in newtons per square meter. Calculate thenormal and axial forces, the lift and drag, moments about the leadingedge, and moments about the quarter chord, all per unit span. Also,calculate the location of the center of pressure.
Air at 7.20 MPa (abs.) and a temperature 1100K flows isentropically through a converging-diverging nozzle, the throat area is 0.01 m^2. Determine:1- The downstream velocity, in the section where the Mach number is 4.0;2- The mass flow rate through the nozzle
he reservoir pressure and temperature for a Laval nozzle are 5 atm [abs] and 520 K,respectively. The flow is isentropically expanded to supersonic speed at the nozzle exitwith area Ae = 4in2. If the exit-to-throat area ratio is 2.295, calculate the followingexit properties: d) ρe; e) p0,e; f) T0,e; gamma = 1.4, R = 287 Please show all work!!
Estimate the mass flow rate and Mach number at the discharged duct when an air flows through a 6cm diameter and 30 m long isentropic duct at P1 = 220 kPa, T1 = 500 K, and V1 = 90 m/s, as well as a 0.025 measured for friction factor in average condition.
An aircraft is flying at supersonic speed. At a component of an aircraft where the flow is perpendicular (normalshock), the density ratio is 5. Solve for: a.Mach Number Downstream b. Pressure Ratio c. Temperature Ratio d. Mach Number upstream
Air exits from a reservoir maintained at 15 °C and 400 kPa absolute into a receiver maintained at (a) 200 kPa absolute and (b) 100 kPa absolute. If the exit area is 0.001 m², by using equations determine the mass flow rate.
The reservoir pressure and temperature for a Laval nozzle are 5 atm [abs] and 520 K,respectively. The flow is isentropically expanded to supersonic speed at the nozzle exitwith area Ae = 4in2. If the exit-to-throat area ratio is 2.295, calculate the followingexit properties: a) Me; b) pe; c) Te; gamma = 1.4, R=287 J/kgK
show that the governing equation for axisymmetric stagnation flow is ϕ ′′′ + 2ϕϕ′′ − ϕ ′2 + 1 = 0 what is the thickness of viscous layer near the axisymmetric stagnation point?
Consider the isentropic flow through a supersonic wind-tunnel nozzle. The reservoir properties are T0= 500 K and p0 = 10 atm. If p (corresponds to your assigned altitude) at the nozzle exit, calculate the exit temperature and density.ASSIGNED ALTITUDE = 9522 ft
A large reservoir at 20 °C and 800 kPa is used to fill a smallinsulated tank through a converging–diverging nozzle with1-cm2 throat area and 1.66-cm2 exit area. The small tankhas a volume of 1 m3 and is initially at 20 °C and 100 kPa. Estimate the elapsed time when (a) shock waves begin toappear inside the nozzle and (b) the mass flow begins todrop below its maximum value.
An aircraft is flying at supersonic speed. At a component of an aircraft where the flow is perpendicular, the density ratio is 5. Solve for: a.Mach Number Downstream b. Pressure Ratio c. Temperature Ratio d. Mach Number upstream
Shock waves are treated as discontinuities here, but theyactually have a very small fi nite thickness. After giving itsome thought, sketch your idea of the distribution of gasvelocity, pressure, temperature, and entropy through theinside of a shock wave.