Air is used as a working k=1.4substance in a given internal r=15combustion engine, which is T=200 Ksupplied with heat at a constant T=2200 Kpressure. Based on the data, | P=1.0132 barcalculate the following:1.Pressure and temperature of | V;=0.16 m³/kgending of isentropicexpansion.2.Cutoff ratioV,=0.48 m/kgthe3.Thermal efficiency of theсycle4.The work of the cycle5.The average pressure of theсycle

**According to the guidelines we can answer only three subparts, please repost the question to get…

Air is used as a working substance in a given internal combustion engine, which is supplied with heat at a constant pressure. Based on the data, calculate the following: 1.Pressure and temperature of ending of isentropic expansion. 2.Cutoff ratio the 3.Thermal efficiency of the сycle 4.The work of the cycle 5.The average pressure of the

Air is used as a working substance in a given internal combustion engine, which is supplied with heat at a constant pressure. Based on the data, calculate the following: 1.Pressure and temperature of ending of isentropic expansion. 2.Cutoff ratio the 3.Thermal efficiency of the сycle 4.The work of the cycle 5.The average pressure of the

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 20RQ: Welded ______sealed compressors are normally used in household refrigerators.

See similar textbooks

Similar questions

Steam expands in a steam turbine isentropically from intet to exhaust having an enthalpy drop=1200 kJ/kg. Assuming ideal conditions determine the mean diameter of wheel if the turbine were of: (1) Single impulse stage. (i) Single 50% reabron stage.
The pressure and temperature at the beginning of compression of a cold air-standard Diesel cycle are 95 kPa and 300 K, respectively. At the end of the heat addition, the pressure is 7.2 MPa and the temperature is 2250 K. Assume constant specific heats evaluated at 300 K. DETERMINE THE MEAN EFFECTIVE PRESSURE IN kPA
10 m3 /min of free air is to be compressed to 8 bar gauge in two stages. Assuming an intercooler pressure of 2 bar gauge and polytropic index of 1.3, what is the power consumption of the first stage compressor ? pls choose one a.20.44 KW b.48.8 HP c.22.4 litre/mole d.42.2 bar-m3/min e.25.12 KW
10 m3/min of free air is to be compressed to 8 bar gauge in two stages. Assuming a 2 bar gauge intercooler pressure and a polytropic index of 1.3, what is the power consumption of the second stage compressor ? Please choose correct option a. 27.76 KW b. 22/7/π m3/min c. 20.46 KW d. 20.46 bar-m3/min e. 48 HP
Air with a flow rate of 72 m3/s, a pressure of 101 kPa, and a temperature of 27oC, enters a multistage reciprocating piston compressor to be compressed polytropically (n = 1.3) to reach 3 MPa. Calculate the compression work: a) With Intercooler b) Without Intercooler
A three-stage, single-acting air compressor with a polytropic index of 1.22 in all stages,runs in an atmosphere at 101.3 kPa and 25 0C. It has a FAD of 4.2 m3/min with adelivery pressure of 1.8 MPa. Induction occurs at 92 kPa and 34 0C. The mechanicaland motor-drive efficiencies are 88% and 93% respectively. Assume complete intercooling and neglect clearance volumes.cp = 1.006 kJ/kg K cv = 0.717 kJ/kg K 1. calculate the rate of heat rejected in the 2nd intercooler (kW) ? round off to 3 decimal places 2. calculate the mass flow rate of the air in the compressor (kg/min) ?round off to 3 decimal places. 3. calculate the indicated power required of the compressor in kW? round off to 1 decimal place. 4. calculate the input power required from an electric motor? round off to 0 decimal place.
A single-acting, single-stage reciprocating compressor is required to deliver 55kg per hour from 750torr and 25 degree celcius conditions to 6750mm Hg delivery pressure of air . The compression is expected to follow PV1.15 = C, polytropic process. Determine the required work of compressor?
In an ideal Otto engine, 350 Btu are added during the constant volume process. During the compression process, the initial volume is 6 cu. ft., the initial pressure is 14 psia and the initial temperature is 110 deg. F. If k = 1.34 and the compression ratio is 8, determine (a) percent clearance; (b) highest temperature; (c) highest pressure; (d) the thermal efficiency; and (e) the mean effective pressure.
Consider a reciprocating air compressor with 3-stage, 7.2 m3/min free air delivery at atmospheric conditions of 144 kPa and 26 0C, respectively. The polytropic compression index is 1.34, while the delivery pressure is 1,665 kPa. The mechanical and motor-drive efficiencies are 85% and 93%, respectively. Accept complete inter-cooling and neglect clearance volumes. If the specific heat capacity of air at constant pressure and volume are 1.006 kJ/kg K and 0.716 kJ/kg K, respectively. Calculate the rate of heat rejected in the intercooler in kilowatt to 1 decimal place.
Assess the different types of industrial compressor and identify justifiable applications for each while focusing on the working principle and flow direction
The following data were obtained from a performance test of a 10 x 9-cm single acting, water jacketed two-stage air compressor: Pressures: Atmospheric, 102 kPaa; leaving first-stage, 634 kPaa; leaving second-stage, 4.20 MPa. Temperatures: Atmospheric, 240C; leaving first-stage, 1080C; entering 2nd stage, 250C; leaving 2nd stage, 1270C Compressor speed, 648 rpm Power input to motor, 5.65 kW Motor and belt efficiency, 81.5% The following are calculated from test data: Air flow rate, 0.387 ??⁄??? Compression exponents: 1st stage 1.15; 2nd Stage, 1.2 Calculate: a) Approximate indicated power b) Power for isothermal compression c) Shaft power d) 1st stage piston displacement e) Actual volumetric efficiency f) Isothermal compression efficiency g) Mechanical efficiency based on the approximate indicated power h) Over-all efficiency of the compressor
A three stage, single-acting air compressor with a polytropic index of 1.22 in all stages, runs in an atmosphere at 101.3 kPa and 25°C. It has a FAD of 4.2 m^3/min with a delivery pressure of 1.8 MPa. Induction occurs at 92 kPa and 34°C. The mechanical and motor-drive efficiencies are 80% and 93% respectively. Assume complete inter-cooling and neglect clearance volume. Cp= 1.006 kJ/kg K Cv= 0.717 kJ/kg K 1) calculate the input power required from an electric motor? 2) which figure represents the diagram for the process?