An AC voltage source of 100V and 50HZ is supplying a coil that has an inductance of 100 mH in series with a resistance of 35 Q as shown below. Calculate:RIms100Vrms 50HZThe power factorOa. 0.724 LaggingOb. 0.704 LaggingOc. 0.684 LaggingOd. 0.744 LaggingThe apparent power consumedOa. 217.6 VAOb. 212.6 VAOc. 207.6 VAOd. 222.6 VAIf a capacitor added in parallel as shown to increase the power factor to unity, find the capacitance value If a capacitor added in parallel as shown to increase the power factor to unity, find the capacitance valueRIms100Vms 50HZOa. 45.21 uFOb. 47.21 UFOc. 43.21 uFOd. 41.21 UF

Due to guidelines we can solve one complete question at a time if you want another question 's…

An AC voltage source of 100V and 50HZ is supplying a coil that has an inductance of 100 mH in series with a resistance of 35 N as shown below. Calculate: Ims 100Vms 50HZ The power factor Oa. 0.724 Lagging Ob. 0.704 Lagging Oc. 0.684 Lagging Od. 0.744 Lagging The apparent power consumed Oa. 217.6 VA Ob, 212.6 VA Oc. 207.6 VA Od. 222.6 VA

An AC voltage source of 100V and 50HZ is supplying a coil that has an inductance of 100 mH in series with a resistance of 35 N as shown below. Calculate: Ims 100Vms 50HZ The power factor Oa. 0.724 Lagging Ob. 0.704 Lagging Oc. 0.684 Lagging Od. 0.744 Lagging The apparent power consumed Oa. 217.6 VA Ob, 212.6 VA Oc. 207.6 VA Od. 222.6 VA

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.27P: An industrial load consisting of a bank of induction motors consumes 50 kW at a power factor of 0.8...

See similar textbooks

Similar questions

The current flowing through a pure inductance 2mH is, l =(15 cos 300t) A. What is the (i) rms and average value of current for a complete cycle?
1. With a neat sketch briefly explain how an alternating voltage is produced when a coil is rotated in a magneticfield. 2. Derive expressions for average value and RMS value of a sinusoidally varying AC voltage 3. A circuit having a resistance of 12Ω, an inductance of 0.15 H and a capacitance of 100μf in series is connectedacross a 100V, 50Hz supply. Calculate the impedance, current, the phase difference between the current andsupply voltage. 4. Two circuits with impedances of Z1 = 10 + j15Ω and Z2 = 6 – j8Ω are connected in parallel. If the supply current is 20A, what is the power dissipated in each branch?
Q6: An AC source operating at 60 Hz with a maximum voltage of 170 V is fed to a series combination of1.2kΩ resistor and 2.5μF capacitor connected in a timer circuit. How can you evaluate the maximumcurrent in the circuit? Can you estimate the rms value potential difference across each circuit element?Compare the power factor of this timer circuit with a circuit contain only ohmic resistance. Justify youranswer?
Exercise 2: Resistances connected in Series-Parallel across a Sinusoidal AC Supply Calculate the following: a) Calculate the peak to peak voltage (Vpk-pk) and peak to peak current (I pk-pk) b) Current flowing through the circuit. (Irms) c) Voltage across resistors R9, R12, R14. (Vrms) d) Current flowing through the resistors R9, R10,R14. (Irms) e) Calculate the time period of the waveform Consider V=3.535Vpk and F=1.5 kHz
The current in a pure capacitor circuit is i=0.17cos500t. If the rms value of the impressed emf is 80 volts. a) What are the equation for the voltage and power? b) What is the circuit frequency?
Two electric devices A and B are connected in parallel, and the rms current in A is 15 amp. If the current in B lags behind A by pi/3 radians and the line current is 23.4 amp, determine the current in B. Ans:12 amps
A series circuit consisting of a resistor that dissipates 640watts, a coil and an ideal capacitor is connected across a 220volts, 60Hz power supply. The current drawn by the load is 8 amperes. The voltage across the coil is 150 volts and its power factor is 0.8 lagging. Determine: a. the resistance of the resistor (10 Ohms)b. the resistance and the inductance of the coil ( 15 Ohms, 29.8416 mH)c. the voltage across the capacitor (181.6515 V)d. the capacitance of the capacitor (116.8207 μF)
A coil with an iron core absorbs a current of 0.5 A when a sinusoidal voltage of 220 V rms is applied to its terminals. If the power absorbed was 30 W, deduce the equivalent circuit of the coil. Ans: RFe = 1,617.64 Ω and Xμ = 457.38 Ω. (I need the procedure)
electric units a & b are connected in parallel and its rms current is 15A. If the current in b lags behind a by pi/3 rads and the current is 23.4 A. find the current in b and sketch the equivalent circuit diagram
A motor with 1mH of inductance and an unknown internal resistance is connected to a 100V RMS 10kHz source. The power factor has been corrected by adding a 247nF capacitor in parallel with the motor. Calculate the value of the internal resistance.
A 1000-W electric motor is connected to a 120 V rms, 60-Hz source. The power factor seen by the source is 0.8, lagging. To correct the pf to 0.95 lagging, a capacitor is placed in parallel with the motor. Calculate the current drawn from the source with and without the capacitor connected. Determine the value of the capacitor required to make the correction.
1. A motor load consists of a resistance of 6 Ohms in series with an inductance of 12 mH. Assume 120Vac, 60 Hz supply. a. What is the complex impedance of the load? b. What is the ac current through this load? c. What is theta, the angle between voltage and current through this load? d. What is the power factor? e. What capacitance should be added in parallel with this load to correct the power factor to 1? f. What is the current from the supply when the power factor is corrected?