An ideal 4-stroke Otto cycle at the beginning of the compression process has air at 1 atm, 20°C and contains a volume inside of 1.6 It. At the end of the compression process the volume inside the engine is reduced to 0.2 It. At the end of the constant volume heat addition process the temperature reaches 1200°C. The motor operates at 3500 r.p.m. Find: a) The specific net work of the cycle, b) The efficiency of the cycle, c) The power net cycle work. answers: a) Wnet =- 323.65kJ / kg b) NOtto =56.3 % c) Wnet =18.20 kW

An ideal 4-stroke Otto cycle at the beginning of the compression process has air at 1 atm, 20°C and contains a volume inside of 1.6 It. At the end of the compression process the volume inside the engine is reduced to 0.2 It. At the end of the constant volume heat addition process the temperature reaches 1200°C. The motor operates at 3500 r.p.m. Find: a) The specific net work of the cycle, b) The efficiency of the cycle, c) The power net cycle work. answers: a) Wnet =- 323.65kJ / kg b) NOtto =56.3 % c) Wnet =18.20 kW

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In an ideal Otto Cycle, the temperature at the end of the heat addition process is2600 deg. F. and the temperature at the end of the expansion process is 883deg. F. What is the compression Ratio?
1. .An Otto cycle with a compression ratio of 7.5 operates from the suction conditions of 97.91 Kpaa,29.4C.find the pressure and temperature at the end of compression a)if coldair(k=1.4) is the working sustance b) if hot air(k=1.32) is the working substance.
The net power of a steam power plant operating on the simple ideal Rankine cycle is 30.5 MW. Water vapor enters the turbine at a pressure of 7 MPa and a temperature of 500 °C, expanding to a condenser pressure of 10 kPa in the turbine. The steam is condensed in the condenser by cooling with water supplied from a lake. The flow rate of the lake water is 1950 kg/s. Get 87% of pump and turbine adiabatic efficiencies. Show the cycle in the T-s diagram. ( Cwater=4.18 kj/kg°C ) a) Calculate the thermal efficiency of the cycle. b) Calculate the flow of steam circulating in the loop. c) Calculate the temperature rise of the coolant.
A four-cylinder spark-ignition engine with a compression ratio of 8 has a pistonswith a bore of 9 cm and a stroke of 10 cm. The air pressure at the beginning of thecompression is 98 kPa, and the temperature is 37 oC. The engine may be modeled by theair-standard Otto cycle. The maximum cycle temperature is 1700 oK. If the engineproduces 75 kW of power, determine a) the heat supplied per cylinder; b) the thermalefficiency; and c) the rpm required.
The compression ratio of an ideal Otto Cycle is 6:1. Initial conditions are 101.3 kPa and 20 deg C. Find the pressure and temperature at the end of adiabatic compression.
An ideal dual cycle has a compression ratio of 18 and a cut off ratio of 2.2. At the beginning of the compressions process, air is at 100kpa and 27 degree Celsius, while it is at 2200 degree Celsius at the end of the heat addition processes. Find the net work done by the cycle, thermal efficiency of cycle, and mean effective pressure.
A Bryton cycle with regeneration using air as the working fluid operates between 880 and 95 KPaas the minimum and maximum pressures and 290 and 1100K as the minimum and maximumtemperatures. Assuming an effectiveness of 100%, find the thermal efficiency of the cycle and thenet power output of the cycle in kW. Assume constant specific heats.
An Otto Cycle, with a 7 to 1 compression ratio, has 320 Btu/lb of heat supply. Atthe beginning of the compression process the pressure and temperature are 14.7Psia and 60 deg. F. Assuming constant specific heat, Calculate:a. Peak Temperatureb. Peak Pressurec. Net Workd. Thermal Efficiency
Provide complete solution and detialed diagram . An Otto cycle has a compression ratio of 12. The initial temperature is 30oC and 100 kpa. Ifheat added is 1000 KJ/kg. Find the mean effective pressure. A. 654.34 kpa B. 984.56 kpa C. 423.45 kpa D. 790.18 kpa
The net power of a steam power plant operating on the simple ideal Rankine cycle is 30.5 MW. Water vapor enters the turbine at a pressure of 7 MPa and a temperature of 500 °C, expanding to a condenser pressure of 10kPa in the turbine. The steam is condensed in the condenser by cooling with water supplied from a lake. The flow rate of the lake water is 1950 kg/s. Take the adiabatic efficiency of the pump and turbine as 87%. Show the cycle in the T-s diagram. a) The thermal efficiency of the cycle, b) The flow rate of the steam circulating in the cycle, c) Calculate the temperature rise of the cooling water.
An air-standard Spark Ignition cycle has a compression ratio of 10.2. Air is at 30000R at the end ofthe heat addition process. Neglecting the variation of specific heats with temperature, determine thefollowing:a. Net output work of the cycleb. Heat rejection per unit mass, Btu/lbc. Thermal efficiency of the cycle(%). Compare this efficiency value if the cycle has to run on an airstandard Carnot Cycle
In an ideal Rankine cycle, steam is generated at 4.1 MPa and 480oC, the condenser is at 32oC. Determine (a) the ideal pump work, (b) the cycle thermal efficiency. (c) For an engine with the same end states, determine its thermal efficiency, steam rate, and mep. (d) Considering the engine only, assume the brake engine efficiency to be 78% the generator efficiency 92%, the steam flow rate 163,600 kg/hr, compute the output of the combined unit.