An independent and constant current source is supplying 0.6 ampere to a uniform copper conductor with length 40 mm, inner radius 7 mm, and outer diameter 20 mm. If the resistivity and the electron concentration of the conductor are 2.4 x 10-8 ohm-meter and 6.4 x 1024 electrons per cubic meter, respectively

An independent and constant current source is supplying 0.6 ampere to a uniform copper conductor with length 40 mm, inner radius 7 mm, and outer diameter 20 mm. If the resistivity and the electron concentration of the conductor are 2.4 x 10-8 ohm-meter and 6.4 x 1024 electrons per cubic meter, respectively

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter28: Current And Resistance

Section: Chapter Questions

Problem 69PQ

See similar textbooks

Similar questions

If the current carried by a conductor is doubled, what happens to (a) the charge carrier density, (b) the current density, (c) the electron drift velocity, and (d) the average time interval between collisions?
Consider a wire of a circular cross-section with a radius of R = 3.00mm. The magnitude of the currentdensity is modeled as J=cr2=5.00106Am4r2 . Whatis the current through the inner section of the wire from the center to r = 0.5R?
Consider a conductor of length 69 millimeters and inner and outer diameters 7.98 millimeters and 13.77 millimeters, respectively. The charge carriers, as a group, travels end to end of the conductor in 4.68 seconds. If the electron volume concentration of the conductor is 7.00 × 1025 electrons per cubic meter, find the total current, in amperes, through the conductor.
consider a conducting wire made of copper. copper has a carrier density of 8.5x10^28 carriers/m^3 and an electrical resistivity of 1.7x10^-8 ohms*m and a charge of 1e/carrier. If a potential difference of 12V is applied between the ends of a copper wire that is 100m long and 1.0mm in diameter, how much current will flow?
A cylindrical conducting wire which is 342.57cm long, 85.39mm thick and resistivity of 3.13Ω.m, If current I = 12.9A is generated by flowing of 217 electrons/m3 via a conductor, Then the electrons through this conductor (b) have a density J =?
A cylindrical conducting wire which is 342.57cm long, 85.39mm thick and resistivity of 3.13Ω.m, (a) has the resistance of R = ? If current I = 12.9A is generated by flowing of 217 electrons/m3 via a conductor, Then the electrons through this conductor (b) have a density J = ?and (c) are drifting at a speed of VD = ?
A typical wire for laboratory experiments is made of copper and has a radius 0.815 mm.Calculate the drift speed of electrons in such a wire carrying a current of 1 A, assuming one freeelectron per atom. (density of copper 8.93 g/cm3 and molar mass of copper 63.5 g/mol)
What is the resistance of a copper bus bar 9.15 meter long and 7.62 cm by 1.27 cm in cross section? Use 1.78 μΩ-cm specific resistance for copper.
A copper (resistivity = 1.72 EXP-8 Ω.m) conductor with a square cross section, 1.0 mm on a side is 100 m long and is initially 20oC. 1. If the temperature coefficient (a) of copper is 0.00393 per degree Celsius, what is the change in resistance of the copper conductor if the temperature is increased to 100 degrees Celsius? 2. What is the resistance of this conductor?
A cylindrical resistor of radius 5.0 mm and length 2.0 cm is made of material that has a resistivity of 3.5 * 10-5 ohm m.What are (a) the magnitude of the current density and (b) the potential difference when the energy dissipation rate in the resistor is 1.0W?
Calculate the specific conductivity of the conductor in Mega(Ωm)-1 since the current passing through a conductor with a cross-section (1.00nm x 1.00µm), length of 10.00mm, is 1.00mA and the voltage value falling on it is 1.00V.
A conductor of uniform radius 1.16 cm carries a current of 2.70 A produced by an electric field of 119 V/m. What is the resistivity of the material?