An oil radiator has an outside surface area of 0.18 m2 and operates at a surface temperature of 85 degree Celsius. If air moves over the surface of the radiator at a temperature of 16 degree Celsius and gives rise to a heat transfer coefficient equal to 38.25 W/(m2-K). Find out the heat transfer rate? 230 W 475 W 550 W O 675 W

An oil radiator has an outside surface area of 0.18 m2 and operates at a surface temperature of 85 degree Celsius. If air moves over the surface of the radiator at a temperature of 16 degree Celsius and gives rise to a heat transfer coefficient equal to 38.25 W/(m2-K). Find out the heat transfer rate? 230 W 475 W 550 W O 675 W

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter7: Forced Convection Inside Tubes And Ducts

Section: Chapter Questions

Problem 7.32P

See similar textbooks

Similar questions

Determine the rate of heat transfer per meter length to a light oil flowing through a 2.5-cm-ID, 60-cm-long copper tube at a velocity of 0.03 m/s. The oil enters the tube at 16C, and the tube is heated by steam condensing on its outer surface at atmospheric pressure with a heat transfer coefficient of 11.3 kW/m K. The properties of the oil at various temperatures are listed in the following table: Temperature, T(C) 15 30 40 65 100 (kg/m3) 912 912 896 880 864 c(kJ/kgK) 1.80 1.84 1.925 2.0 2.135 k(W/mK) 0.133 0.133 0.131 0.129 0.128 (kg/ms) 0.089 0.0414 0.023 0.00786 0.0033 Pr 1204 573 338 122 55
A mild-steel cylindrical billet 25 cm in diameter is to be raised to a minimum temperature of 760C by passing it through a 6-m long strip-type furnace. If the furnace gases are at 1538C and the overall heat transfer coefficient on the outside of the billet is 68W/m2K, determine the maximum speed at which a continuous billet entering at 204C can travel through the furnace.
7.43 Liquid sodium is to be heated from 500 K to 600 K by passing it at a flow rate of 5.0 kg/s through a 5-cmID tube whose surface is maintained at 620 K. What length of tube is required?
3.10 A spherical shell satellite (3-m-OD, 1.25-cm-thick stainless steel walls) re-enters the atmosphere from outer space. If its original temperature is 38°C, the effective average temperature of the atmosphere is 1093°C, and the effective heat transfer coefficient is , estimate the temperature of the shell after reentry, assuming the time of reentry is 10 min and the interior of the shell is evacuated.
1.21 In an experimental set up in a laboratory, a long cylinder with a 5-cm diameter, and an electrical resistance heater inside its entire length is cooled with water flowing crosswise over the cylinder at and a velocity of 0.8 m/s. For these flow conditions, 20 kW/m of power is required to maintain a uniform temperature of at the surface of the cylinder. When water is not available, air at is used with a velocity of 10 m/s to maintain the same surface temperature. However, in this case, the cylinder surface heat dissipation rate is reduced to 400 W/m. Calculate the convection heat transfer coefficients for both water and air, and comment on the reason for the differences in the values.
A CPU heatsink (fan included) blows room temperature air with a total convective heat transfer coefficient of 28 2/m2K. The air travels over a heatsink comprised of 12 fins 40mm long x 18mm high. If the CPU (intel I7-9700K) has a thermal dissipation of 120W, what must the average surface temperature of the fins be?
Steam in a heating system flows through tubeswhose outer diameter is 5 cm and whose walls are maintainedat a temperature of 180°C. Circular aluminum alloy 2024-T6fins (k = 186 W/m·K) of outer diameter 6 cm and constantthickness 1 mm are attached to the tube. The space betweenthe fins is 3 mm, and thus there are 250 fins per meter lengthof the tube. Heat is transferred to the surrounding air at T` = 25°C, with a heat transfer coefficient of 40 W/m2·K. Determine the increase in heat transfer from the tube per meter of its length as a result of adding fins.
Local Nusselt number is given as Nux=0.04Rex0.9 Pr 1/3. Obtain an expression for, a) average heat transfer coefficient, h1 x b) local heat transfer coefficient, hx c) What is the ratio of the average to local coefficient, h1x / hx
STEAM FLOW IN AN INSULATE PIPE AT ATEMPERATURE 130 C. THE INSIDE HEAT TRANSFER COEFFICIENT IS 79 W/M-K AND THE OUTSIDE COEFFICIENT IS 15 W/M-K. THE PIPE IS MILD STEEEL (K=57 WLM-K) AND HAS AN INSIDE RADIUS OF 50 MM AND AN OUTSIDE RADIUS 57 MM. THE PIPE IS COVERD WITH A 25.4 MM LAYER ( K=0.09 W/M-K). DETERMINE THE OVERALL HEAT TRANSFER COEFFICIENTIF THE SURROUNDING AIR TEMPERATURE IS 21.1 C.
4.) A 15-cm-diameter steam line carries saturated steam at 6 MPa and is located in a tunnel with stagnant air with a temperature of 50oC. The outside unit convective coefficient is 8.5 W/m2-K. The steam line is covered with 3 cm of 85% magnesia insulation. It is decided to reduce the heat loss by one-half. How much 85% magnesia insulation is required? Neglect thermal resistance of pipe and inside surface.
The rate of heat transfer per unit area from a metal plate is 1000 W/m^2 . The surface temperature of the plate is 120°C, and ambient temperature is 20°C. Estimate the convective heat transfer coefficient.
Water flows on the inside of a steel pipe with an ID of 2.5 cm. The wall thickness is 2 mm, and the convection coefficient on the inside is 500 W/m2◦C. The convection coefficient on the outside is 12 W/m2 ◦C. Calculate the overall heat-transfer coefficient.