STEAM FLOW IN AN INSULATE PIPE AT ATEMPERATURE 130 C. THE INSIDE HEAT TRANSFER COEFFICIENT IS 79 W/M-K AND THE OUTSIDE COEFFICIENT IS 15 W/M-K. THE PIPE IS MILD STEEEL (K=57 WLM-K) AND HAS AN INSIDE RADIUS OF 50 MM AND AN OUTSIDE RADIUS 57 MM. THE PIPE IS COVERD WITH A 25.4 MM LAYER ( K=0.09 W/M-K). DETERMINE THE OVERALL HEAT TRANSFER COEFFICIENTIF THE SURROUNDING AIR TEMPERATURE IS 21.1 C.

STEAM FLOW IN AN INSULATE PIPE AT ATEMPERATURE 130 C. THE INSIDE HEAT TRANSFER COEFFICIENT IS 79 W/M-K AND THE OUTSIDE COEFFICIENT IS 15 W/M-K. THE PIPE IS MILD STEEEL (K=57 WLM-K) AND HAS AN INSIDE RADIUS OF 50 MM AND AN OUTSIDE RADIUS 57 MM. THE PIPE IS COVERD WITH A 25.4 MM LAYER ( K=0.09 W/M-K). DETERMINE THE OVERALL HEAT TRANSFER COEFFICIENTIF THE SURROUNDING AIR TEMPERATURE IS 21.1 C.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter7: Forced Convection Inside Tubes And Ducts

Section: Chapter Questions

Problem 7.32P

See similar textbooks

Similar questions

7.43 Liquid sodium is to be heated from 500 K to 600 K by passing it at a flow rate of 5.0 kg/s through a 5-cmID tube whose surface is maintained at 620 K. What length of tube is required?
A mild-steel cylindrical billet 25 cm in diameter is to be raised to a minimum temperature of 760C by passing it through a 6-m long strip-type furnace. If the furnace gases are at 1538C and the overall heat transfer coefficient on the outside of the billet is 68W/m2K, determine the maximum speed at which a continuous billet entering at 204C can travel through the furnace.
To cool a storehouse in the summer without using a conventional air-conditioning system, the owner decided to hire an engineer to design an alternative system that would make use of the water in the nearby lake. The engineer decided to flow air through a thin smooth 10-cm-diameter copper tube that is submerged in the nearby lake. The water in the lake is typically maintained at a constant temperature of 15°C and a convection heat transfer coefficient of 1000 W/m2?K. If air (1 atm) enters the copper tube at a mean temperature of 30°C with an average velocity of 2.5 m/s, determine the necessary copper tube length so that the outlet mean temperature of the air is 20°C.
The gas at an average temperature of 160 oC is carried through a steel (steel=46 W/m2.K) pipe with an inner diameter of 9.2 cm and an outer diameter of 11.0 cm. The pipe is first covered externally with insulation material with a thermal conductivity coefficient of k=0.0623 W/m.K in 4 cm thickness and then with another material with a thermal conductivity coefficient of k=0.047 W/m.K in 3 cm thickness. The individual convective heat transfer coefficient on the gas side inside the pipe is 63 W/m2.K, and the individual convective heat transfer coefficient on the atmospheric air side outside the pipe covered with insulation material is 37 W/m2.K. Since the temperature of the atmospheric air where the pipe is located is 23 oC; a) Calculate the heat transferred per unit pipe length, b) the interface temperatures between the layers.
Consider a stainless steel spoon (k ! 8.7Btu/h · ft · "F) partially immersed in boiling water at 200"F in akitchen at 75"F. The handle of the spoon has a cross section of0.08 in & 0.5 in, and extends 7 in in the air from the free sur-face of the water. If the heat transfer coefficient at the exposedsurfaces of the spoon handle is 3 Btu/h · ft2 · "F, determine thetemperature difference across the exposed surface of the spoonhandle. State your assumptions. Answer: 124.6"F
A steam condenser operates at 61 cm of Hg vacuum. The steam enters the condenser with a moisture content of 87%. Cooling water is supplied to the condenser at a temperature of 20 C with a terminal difference of 5 C. The water velocity of water inside the tube is to be limited to 2.5 m/s when using 2.5 cm outside diameter tubes whose thickness is 1.75 mm. The overall heat transfer coefficient of the tubes could be approximated by the equation U = 1213.4(v1/2), W/(m2-C) where v is the water velocity in m/sec. Determine: 1. The required mass flow of cooling water, kg/s 2. The required capacity of the circulating pump, liter per second 3. The Logarithmic Mean Temperature Difference, C 4. The required Number of tubes 5. The required length of tubes, (m), and number of passes
In the effort to find the best way to cool a smooth thin-walled copper tube, an engineer decided to flow air either through the tube or across the outer tube surface. The tube has a diameter of 6 cm, and the surface temperature is maintained constant. Determine the convection heat transfer coefficient when air is flowing through a thin-walled tube at 25 m/s with bulk mean temperature of 50°C. _____ w/m^2k
Air flows at 120 oC in a thin-walled tube (k = 18 W/m oC) with h = 65 w/m2- oC. The inside diameter of the tube is 2.5 cm tand the wall thickness is 0.4 mm. The tube is exposed to an environment with h = 6.5 W/m2-oC and temperature of 15 oC. Calculate the Overall heat transfer coefficient and the heat loss for 1 m length. (four decimal places for final answer)
Steam flows at a temperature of 550C through a pipe (k-80w / mK) with inner and outer diameters of 5 cm and 5.5 cm. The pipe is covered with 3 cm thick glass wool with a heat transfer coefficient of 0.05 W / mK. Since the heat transfer coefficient on the inner surface of the pipe is 600 W / m'K, the external ambient heat transfer coefficient is 35 W / m'K and the ambient temperature is 15C; a) It does not calculate the amount of soot that passes through a unit length of pipe. b) Examine the insulation made by calculating the critical insulation radius.
Pulverized coal particles are used in oxy-fuel combustion power plants for electricity generation. Consider a situation where coal particles are suspended in hot air flowing through a heated tube, where the convection heat transfer coefficient is 100 W/m2·K. If the average surface area and volume of the coal particles are 3.1 mm2 and 0.5 mm3, respectively, determine how much time it would take to heat the coal particles to two-thirds of the initial temperature difference.
The walls of the refrigerated storage room are 10 m long and 3 m high and constructed with 90 mm concrete blocks (k = 0.935 W / [m ° C]) and 12 cm fiber insulation board (k = 0.048 W). / [m ° C]). The temperature of the cold room is -10 ° C and the convective hot coupling is 40 W / (m² K); The outside air temperature is 30 ° C with a convection heat transfer coefficient of 10 W / (m² K). Calculate the total heat wave. Total heat transfer coefficient = Answer W / (m² K).
In a thermal power plant, a horizontal copper pipe of "D" diameter, "L" length and thickness 1.7 cm enters into the boiler that has the thermal conductivity as 0.3 W/mK. The boiler is maintained at 107degreeC and temperature of the water that flows inside the pipe is at 31degreeC. If the energy transfer (Q) is 124925 kJ in 7 hours. Determine the Heat transfer rate, Surface area of the pipe and Diameter & Length of the pipe, if D = 0.012 L.Change in Temperature (in K) Heat Transfer Rate (in W) Surface Area of the Pipe (m2) Pipe Length (in m) Pipe Diameter (in mm)