An uncrowned straight-bevel pinion has 20 teeth, a diametral pitch of 20 teeth, and a transmission accuracy number of 6. Both the pinion and gear are made of through-hardened steel with a Brinell hardness of 300. The driven gear has 60 teeth. The gear set has a life goal of 10° revolutions of the pinion with a reliability of 0.999. The shaft angle is 900; the pinion speed is 900 rev/min. The fo ee wid+h is 22 mm and the ormal onglo rooour

An uncrowned straight-bevel pinion has 20 teeth, a diametral pitch of 20 teeth, and a transmission accuracy number of 6. Both the pinion and gear are made of through-hardened steel with a Brinell hardness of 300. The driven gear has 60 teeth. The gear set has a life goal of 10° revolutions of the pinion with a reliability of 0.999. The shaft angle is 900; the pinion speed is 900 rev/min. The fo ee wid+h is 22 mm and the ormal onglo rooour

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q4 An uncrowned straight-bevel pinion has 22 teeth, a module of 4.5 mm, and a transmission accuracy number of 8. The pinion is made of Nitralloy 135 M Grade 2 steel having core and case hardnesses of Brinell of 224. The gear is made of carburized and case hardened Grade 1 steel, both having core and case hardnesses of 280 Brinell The pinion drives the 28-tooth bevel gear. The shaft angle is 90°, the pinion speed is 1524 rev/min, the face width is 36 mm, and the normal pressure angle is 20°. Both gears have an outboard mounting. Find the power rating based on AGMA bending and pitting resistance if the life goal is 109 revolutions of the pinion at 0.9999 reliability.Use Ko = 1.25; SF = 2 and SH = 1.5.
A gear set with a 20-tooth input pinion and a 42-tooth gear has a diametral pitch of 4 teeth/in. the pinion speed is 200 rpm with an input torque of 170 in-lbf. Which component of the load contributes to the transmitted power and what is it’s magnitude? Choose answer below Radial load 68lbf Tangential load 68lbf Radial load 136 lbf Tangential load 136 lbf None of the above
A commercial enclosed spur gearset has 22 teeth on the pinion and 60 teeth on the gear. The pressure angle is 20° and the overload factor Ko =1. The diametral pitch is 8 teeth/in and the face width is 5 in. The pinion speed is 1000 rev/min and its cycle life is to be 10° revolutions at a reliability R =0.50. The quality number is 5 and the tooth are crowned. The material is a through-hardened steel, grade 2, with Brinell hardnesses of 250 core and case of both gears. For a conservative design and bending stress design factor of 2, rate the pinion (power) for these conditions using the AGMA method.
A pair of steel gears have a design life of a million cycles. They have 20° full-depth teeth with a diametral pitch of 8. Both gear and pinion are made of steel heat-treated to 350 Bhn, and both have a face width of 1.0 in. The teeth are machined with the highest quality hobbing operation. The pinion has 35 teeth and rotates 2000 rpm. The gear diameter over pinion diameter ratio is 2. The gears stay below a temperature of 140 °F. Assume a mounting correction factor of Km = 1.6 and an overload factor of Ko = 1. Use a reliability of 99.9% and a safety factor of 1.5. Use the pinion for the bending fatigue calculations and assume that there is no load sharing. A. What is the fatigue strength for these conditions. B. What is the tangential force acting on the gear teeth? C. Estimate the horsepower that can be transmitted, based only on bending fatigue.
Qv quality number for camberless straight bevel pinion gear with 20 teeth and a modulus of 4 mmis 6. Made of 1st quality steel, with a hardness of 300 HB, the pinion and the reciprocating gear are completelyhardened. The rotated gear has 60 teeth. Pinion life is 109 cycles and reliabilitycoefficient is 0.999. Shaft angle is 90o, pinion rotation speed is 900 rpm. Tooth width 32 mm andThe normal pressure angle is 20o. Based on AGMA bending strength, the strength of the gear systemcalculate. Load factor Ko =1, safety factor SF =1.
A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively, is used to drive an electric wheelchair at a velocity that is double the maximum velocity of slip. The pinion has an equal addendum as the gear wheel, a module of 3 mm, and a pressure angle of 14.5o. The wheelchair has a maximum velocity of 5 m/s when its pinion rotates at 800 r.p.m. Calculate The contact ratio.
Q2 A commercial enclosed gear drive is to be designed. Initially, the following is specified. The drive is to transmit 9.6 kW with an input pinion speed of 350 rev/min. The drive is to consist of two spur gears, with a 20° pressure angle, and the pinion is to have 20 teeth driving a 64-tooth gear. The pinion is made to be Grade 1 nitraded though hardened steel at 254 Brinell. The gear is made to be Grade 3 carburized and hardened steel at 284 Brinell. Both gears made to No. 6 quality standards. The gears will be uncrowned, centered on their shafts between bearings. A pinion life of 19232 cycles is desired, with a 99.99 per cent reliability. Analysis gears stress (bending and pitting) according to the AGMA approach and the corresponding factor of safety.
The following data refer to two meshing involute gears of 20° pressure angle: Number of teeth on pinion 20, speed ratio = 2, speed of pinion = 250 rpm, module = 12 mm The addendum of each wheel is such that the path of approach and path of recess on each side are half of the maximum possible length. 1) Illustrate the value of addendum for both wheels, 2) Identify the length of arc of contact, and, 3) Formulate the free body diagrams for wheels in connection.
14-21 A 20° spur pinion with 20 teeth and a module of 2.5 mm transmits 120 W to a 36-tooth gear. The pinion speed is 100 rev/min, and the gears are grade 1, 18-mm face width, through-hardened steel at 200 Brinell, uncrowned, manufactured to a No. 6 quality standard, and considered to be of open gearing quality installation. Find the AGMA bending and contact stresses and the corresponding factors of safety for a pinion life of 10° cycles and a reliability of 0.95.
A 10 pitch pinion with 20 teeth mates with a gear having 80 teeth The pinion rotates at 3,000 RPM. The gear pair is to be installed in a rectangular housing where a minimum of 0.20 in clearance botween the gears and housing is requirod. Specify the dimensions X and Y as shown in tho figure below Note: This question requires a file attachinent, which can be pdf, ipeg. word, excol or power point. Show all your calculations. Handwritten calculations are acceptable. 0.20 in 0.20 In 0.20 in GEAR PINION N, 20
speed reduction gear box consist of an SAE 4140 steel pinion mounted to a shaft on a 30 HP, 1750 rpm electric motor. The pinion drives a cast steel (with 0.25% carbon) gear with a speed reduction of 5:1. Assuming 20 degrees involute stub teeth and 16 teeth pinion, determine the pitch diameters. A. 2.67, 13.35 in B. 3.23, 15.43 in C. 2.50, 16.61 in D. 2.45, 20.11 in
Design a compound gear train with a +120:1 ratio and diametral pitch of 5 teeth/inch. Assume ø= 20° and avoiding interference between pinion and gear; i.e., use Table 9-5a page 495. Draw a front-view using circle template or compass and a top-view using a ruler. N2 = 15T N3 = 30T N4 = 15T N5 = 45T N6 = 16T N7 = 64T Ng = 16T N9 = 80T Answer: d2 = 3" d3 = 6" d4 = 3" ds = 9" do = 3.2" d7 = 12.8" dg = 3.2" d9 = 16"