An undisturbed soil sample, 100 mm in diameter and 200 mm high, was tested in a triaxial machine. The sample failed at an additional axial load of 3 kN with a vertical deformation of 20 mm. The failure plane was inclined at 50° to the horizontal and the cell pressure was 300 kN/m2, Determine, from Mohr’s circle, the angle of friction . show fbd a.18 b.14 c.12 d.10

An undisturbed soil sample, 100 mm in diameter and 200 mm high, was tested in a triaxial machine. The sample failed at an additional axial load of 3 kN with a vertical deformation of 20 mm. The failure plane was inclined at 50° to the horizontal and the cell pressure was 300 kN/m2, Determine, from Mohr’s circle, the angle of friction . show fbd a.18 b.14 c.12 d.10

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter12: Shear Strength Of Soil

Section: Chapter Questions

Problem 12.18P

See similar textbooks

Similar questions

Following are the results of consolidated-undrained triaxial tests on undisturbed soils retrieved from a 4-m thick saturated clay layer in the field (sat = 20.7 kN/m3). a. Estimate graphically the Mohr-Coulomb shear strength parameters c' and '. b. Estimate the shear strength in the middle of the clay layer.
An undisturbed soil sample, 100 mm in diameter and 200 mm high, was tested in a triaxial machine. The sample failed at an additional axial load of 3 kN with a vertical deformation of 20 mm. The failure plane was inclined at 50° to the horizontal and the cell pressure was 300 kN/m2, Determine, from Mohr’s circle, the angle of friction . a.18 b.14 c.10 d.12
A saturated specimen of cohesionless sand was tested under drained conditions in a triaxial compression test apparatus and the sample failed at a deviator stress of 482 kN/m2 and the plane of failure made an angle of 60° with the horizontal. What would be the magnitude of the deviator stress in kPa at failure for identical specimen of sand if it is tested under a cell pressure of 200 kPa? a. 200 b. 241 c. 400 d. 600
An undisturbed soil sample, 100 mm in diameter and 200 mm high, was tested in a triaxial machine. The sample failed at an additional axial load of 3 kN with a vertical deformation of 20 mm. The failure plane was inclined at 50° to the horizontal and the cell pressure was 300 kN/m2, Determine, from Mohr’s circle, the cohesion in kPa. a.117.8 b.91.3 c.125.6 d.87.2
A saturated specimen of cohesionless sand was tested under drained conditions in a triaxial compression test apparatus and the sample failed at a deviator stress of 482 kN/m2 and the plane of failure made an angle of 60° with the horizontal. What would be the magnitude of the deviator stress in kPa at failure for identical specimen of sand if it is tested under a cell pressure of 200 kPa? a.241 b.200 c.600 d.400 With Free Body Diagram
An undisturbed soil sample, 100 mm in diameter and 200 mm high, was tested in a triaxial machine. The sample failed at an additional axial load of 3 kN with a vertical deformation of 20 mm. The failure plane was inclined at 50° to the horizontal and the cell pressure was 300 kN/m2, Determine, from Mohr’s circle, the angle of friction. Pls include fbd.
11.15 The time for 65% consolidation of a 19-mm clay specimen (drained at top and bottom) in the laboratory is 10 minutes. How long will it take for a 4-m-thick clay layer in the field to undergo 40% consolidation under the same pressure increment? In the field, there is a rock layer at the bottom of the clay. 11.16 A 3.75 m clay layer in the field (drained on one side) is normally conso
A cylindrical sample of soil having a cohesion of 80 kN/m2 and an angle of internal friction of 20° is subjected to a cell pressure of 100 kN/m2. Determine the maximum deviator stress at which the sample will fail in kPa a. 387 b. 333 c. 246 d. 255
In a consolidated drained tri-axial text on a normally consolidated clay soil, a deviator of 152 kPa was required to fail the sample when the confining pressure was 70 kPa. A. What was the angle of shearing resistance? B. Suppose that after consolidation under the 70 kPa confining pressure, the sample is placed in an unconfined compression apparatus and tested. Determine the resulting shear strength.
A clay sample was consolidated in a triaxial cell under a backpressure of 50 kPa and cell pressure of 150 kPa. The drainage valve was then closed and the cell pressure was increased to 200 kPa when the pore pressure increased to 98 kPa. What is Skempton’s B-parameter? The above sample was then subjected to a vertical deviator stress, which was increased from zero under undrained conditions. The sample failed when the pore water pressure was 160 kPa and the deviator stress was 70 kPa. What is Skempton’s A-parameter at failure? Assuming the clay is normally consolidated, find the friction angle in terms of effective stresses.
A saturated specimen of cohesionless sand was tested under drained conditions in a triaxial compression test apparatus and the sample failed at a deviator stress of 482 kN/m2 and the plane of failure made an angle of 60° with the horizontal. Find the magnitude of the principal minor stress in kPa at failure for identical specimen of sand if it is tested under a cell pressure of 200 kPa. a.600 b.241 c.723 d.200
A saturated specimen of cohesionless sand was tested under drained conditions in a triaxial compression test apparatus and the sample failed at a deviator stress of 482 kN/m2 and the plane of failure made an angle of 60° with the horizontal. What would be the magnitude of the deviator stress in kPa at failure for identical specimen of sand if it is tested under a cell pressure of 200 kPa? Show diagram