An embankment consists of clay fill for which c=25 kPa and angle of internal friction is 260 (from consolidated undrained test with pore pressure measurement) The weight of fill per unit volume is 18.64 kN/m3. Compute the effective stress in kPa at a depth of 20 m. If the pore pressure at this point is shown by a piezometer to be 180 kPa. a. 62.5 b. 372.8 c. 192.8 d. 21.6

An embankment consists of clay fill for which c=25 kPa and angle of internal friction is 260 (from consolidated undrained test with pore pressure measurement) The weight of fill per unit volume is 18.64 kN/m3. Compute the effective stress in kPa at a depth of 20 m. If the pore pressure at this point is shown by a piezometer to be 180 kPa. a. 62.5 b. 372.8 c. 192.8 d. 21.6

Principles of Foundation Engineering (MindTap Course List)

8th Edition

ISBN:9781305081550

Author:Braja M. Das

Publisher:Braja M. Das

Chapter6: Vertical Stress Increase In Soil

Section: Chapter Questions

Problem 6.11P

See similar textbooks

Similar questions

44.) A 5 m-thick clay (Gs = 2.65, water content = 0.28) is overlain by a 4.50m-thick layer of sand (Gs = 2.60, e = 0.70, S = 0.85). The ground water table is located 4.50 m from the ground surface. Compute for the following: 1. At what depth would the vertical effective stress be equal to 120 kPa? 2. What is the vertical effective stress at a depth 9 m below the ground surface? 3. The depth of excavation required to reduce the effective stress at the bottom of the clay layer by 100 kPa. Question 1: A. 1.94 Question 1: B. 3.99 Question 1: C. 6.44 Question 1: D. 8.49 Question 2: A. 168.9 Question 2: B. 44.1 Question 2: C. 120.1 Question 2: D. 124.8 Question 3: A. 1.83 Question 3: B. 7.67 Question 3: C. 3.17 Question 3: D. 6.33
An embankment consists of clay fill for which c=25 kPa and angle of internal friction is 260 9from consolidated undrained test with pore pressure measurement) The weight of fill per unit volume is 18.64 kN/m3. Compute the stress in kPa at depth of 20 m. a. 192.8 b. 62.5 c. 21.6 d. 372.8
A 5m thick clay (Gs = 2.65, water content = 0.28) is overlain by a 4.5m thick layer of sand (Gs = 2.60, e = 0.70, S = 0.85). The ground water table is locate 4.5m from the ground surface. 1. at what depth would the vertical effective stress be equal to 120kpa?2. what is the vertical effective stress at a depth 9m below the ground surface? 3. what depth of excavation required to reduce the effective stress at the bottom of the clay layer by 100kpa?
An embankment consists of clay fill for which c=25 kPa and angle of internal friction is 260 9from consolidated undrained test with pore pressure measurement) The weight of fill per unit volume is 18.64 kN/m3. Compute the stress in kPa at depth of 20 m. Show free body diagram a.21.6 b.372.8 c.192.8 d.62.5
A 5 m-thick clay (Gs = 2.65, water content = 0.28) is overlain by a 4.50m-thick layer of sand (Gs = 2.60, e = 0.70, S = 0.85). The ground water table is located 4.50 m from the ground surface. Compute for the following: 1. At what depth would the vertical effective stress be equal to 120 kPa? 2. What is the vertical effective stress at a depth 9 m below the ground surface? 3. The depth of excavation required to reduce the effective stress at the bottom of the clay layer by 100 kPa.
The soil stress state is shown in the figure, σx = 10 kN/m2, σy = 50 kN/m2, τxy = -10 kN/m2:(1) Please use Mohr circle to draw the soil stress state(2) Calculate the maximum principal stress σ1 and the minimum principal stress σ3(3) Please find the (pole) position(4) What is the angle of intersection between the maximum principal stress surface and the horizontal plane?
What is the intensity of active earth pressure at a depth of 10.0 m in dry sand with an angle of shearing resistance of 30 degrees and unit weight of 18kN /m ^ 3 ?
If the water table was found in the interface of clay and sand instead (at 5m depth), graph the effective stress diagram of the profile. Consider a 2.5m capillary rise and S = 85% in that capillary zone. The properties of the first clay layer apply to the entire zone above the capillary zone. For specific gravity, Gs = 2.68.
The soil in a deposit underlying an area where a level ground surface exists has a unit weight of 22 kN/m3. Determine the principal stresses o1 and oz at a depth of 5 m below the soil surface if the lateral pressure is 0.50 of the vertical pressure. Adjust your answer to ZERO decimal places. 01 = kN/m2, 03 = kN/m2
5. A thick layer of stiff saturated clay is underlain by a layer of sand under artesian pressure. A deep cut is made in the clay layer as shown in the attached figure. Determine: [2] a. The total stress at point A. b. The factor of safety against heaving at point A, if the effective stress is 12% of the total stress.
An embankment consists of clay fill for which c′ = 25 kN/m2 and φ = 27° (from consolidated undrained tests with pore-pressure measurement). The average bulk unit-weight of the fill is 2 Mg/m3. Estimate the shear-strength in kPa of the material on a horizontal plane at a point 20 m below the surface of the embankment, if the pore pressure at this point is 180 kN/m2 as shown by a piezometer.
A flexible circular area of radius 3.3 m. is uniformly loaded by q = 315 kN/m². Determine the increase in vertical stress, 3.5 m. deep at its center.