As part of this experiment you will need to determine the concentrations of Fe* and SCN ionspresent in test tubes 1-9. These values can be calculated using the volumes and concentrationsprovided in Tables 1 and 2 of the Equilibrium Lab - Procedure and the dilution equation (M,V1 =M2V2).Note: the solutions provided in the lab, and therefore the tables in the lab document, are thecompounds used to prepare the solution. You must determine the concentration of the ions based onhow these compounds díssociate in solutionComplete the following table by filling the the calculated initial concentrations of each substance. Besure to:Pay attention to significant figures• Round appropriatelyUse decimal notation (not scientific)Do not include unitsTestInitial [Fe3*] (M)Initial [SCN'] (M)Tube134.6.78.2. Table 1. Volumes of Fe(NO:)3, KSCN and HNO; Used to Prepare Standard SolutionsTest Tube 0.00020 M Fe(NO:)3 (mL)1.00 M KSCN (mL)0.10 M HNO; (mL)10.05.05.021.05.04.032.05.03.043.05.02.054.05.01.0PART II. PREPARING SOLUTIONS FOR DETERMINING THE EQUILIBRIUM CONSTANT K.Obtain 4 more test tubes and label them 6 through 9.Add the proper amount of 0.0025 M iron(III) nitrate to each test tube according to the table providedbelow. Note the concentration: This is NOT the diluted solution that was prepared in Part I.a.b.Add the proper amount of 0.0025 M KSCN to each test tube; note that the concentration of thissolution is also different from the one used previously.Add the proper amount of 0.10 M HNO3 to each test tube.с.d.Stopper and shake the test tubes.Compare your solutions to the example solutions on the Instructor Demonstration benchtop.е.f.Tables 2. Volumes of Fe(NO;)3, KSCN and HNO; Used to Prepare Solutions for the Determination of theEquilibrium Constant0.0025 M Fe(NO3)3(mL)Test Tube0.0025 M KSCN0.10 M HNO3(mL)(mL)1.01.05.071.02.04.082.02.04.02.03.03.0

Answered: Image /qna-images/answer/826447a3-c3d2-4531-9022-190cd273cb09.jpg

As part of this experíment you will need to determine the concentrations of Fe* and SCN+ ions present in test tubes 1-9. These values can be calculated usíng the volumes and concentrations provided in Tables 1 and 2 of the Equilibrium Lab - Procedure and the dilution equation (M,V1 = %3D M2V2). Note: the solutions provided in the lab, and therefore the tables in the lab document, are the compounds used to prepare the solution. You must determine the concentration of the ions based on how these compounds dissociate in solution Complete the following table by filling the the calculated initial concentrations of each substance. Be sure to: Pay attention to significant figures • Round appropríately Use decimal notation (not scientific) Do not include units

As part of this experíment you will need to determine the concentrations of Fe* and SCN+ ions present in test tubes 1-9. These values can be calculated usíng the volumes and concentrations provided in Tables 1 and 2 of the Equilibrium Lab - Procedure and the dilution equation (M,V1 = %3D M2V2). Note: the solutions provided in the lab, and therefore the tables in the lab document, are the compounds used to prepare the solution. You must determine the concentration of the ions based on how these compounds dissociate in solution Complete the following table by filling the the calculated initial concentrations of each substance. Be sure to: Pay attention to significant figures • Round appropríately Use decimal notation (not scientific) Do not include units

EBK A SMALL SCALE APPROACH TO ORGANIC L

4th Edition

ISBN:9781305446021

Author:Lampman

Publisher:Lampman

Chapter88: Column Chromatography

Section: Chapter Questions

Problem 5P

See similar textbooks

Similar questions

Dilute the stock solution: Using the solutions in the burets, carefully measure the following quantities of Co(NO3)2 solution and water into 5 large test tubes, to a total of 5.00 mL in each test tube. Yes, the optional video says to make 10.00 mL total, but 5.00 mL is sufficient at this time and generates less waste. Use the buret to measure the cobalt solution and the water. Test tube No. 1 2 3 4 5 mL Co2+ Soln 1.00 2.00 3.00 4.00 5.00 mL H2O 4.00 3.00 2.00 1.00 0.00 Total mL 5.00 5.00 5.00 5.00 5.00 Mix each test tube thoroughly: hold the top of the tube and mix the bottom well. Transfer a portion of each diluted sample into a clean, dry sample cuvette. fill the concentration table and do calculations please
In this experiment you were given the concentration of NaOH(aq). That concentration was determined in part A.1. by using a solid acid, potassium hydrogen phthalate. Suppose the potassium hydrogen phthalate used for the standardization of the sodium hydroxide solution is not completely dry. This technique error will result in the reported concentration of NaOH(aq) to be ____________. a. unaffected b. too high c. too low
00 mL of a diprotic acid primary standard solution was accurately prepared to a concentration of 0.1431 M. Three samples of this primary standard solution were used as samples in a titration to standardize an aqueous solution of sodium hydroxide, NaOH, which would be used as a titrant. Using the following table of data for the titration of the primary standard acid with NaOH, calculate the average concentration of NaOH. Trial # Volume of primary standard Initial titrant volume Final titrant volume 1 10.00 mL 8.21 mL 27.22 mL 2 10.00 mL 27.22 mL 46.23 mL 3 10.00 mL 30.28 mL 49.29 mL 0.1506 M 0.0753 M 0.0376 M 0.1431 M 0.0526 M
Prepare 100.00 mL of a solution with ALL the following chemicals into together; CHEMICALS PROVIDED solid FeCl3 6H2O, iron(II) chloride hexahydrate (source of FeCl3) dilute hydrochloric acid in the rack – 3.0 M solid sodium salicylate – 99.7% assay Concentrations needed in the 100mL solution FeCl3: 0.020 M HCl: 0.050 M Salicylate (mg/L): 40.25 PLEASE SHOW HOW TO CALUATE AND WORK. The only equations you will need to use are the equations for molarity and dilutions.
Which statement is true? Statement 1: Extraction is a technique used to separate compound/s of interest from the sample matrix or mixture. Statement 2: The distribution coefficient is the ratio of the equilibrium volumes of the two solvents.
6. Why do we need to precipitate from a hot solution? 7. Why is the precipitating agent added all at once? 8. What is the purpose of adding 6M HCI in the sample solution? 9. Why do we need to test the washings with AgNO3? 10. What is done in an ignition process? 11. What is the product after the precipitate was ignited? 12. What are the advantages of performing ignition? 13. Cite the sources of errors for this experiment and explain how to possibly circumvent these kinds of problems.
Gravimetric analysis of Fe3O4 (MW = 232 g/mole) may be undertaken with the following reactions: Fe3O4 → Fe2O3 → Fe (OH)3. Weight of sample containing 8.00% Fe3O4 that must be taken to obtain a precipitate of Fe(OH)3 (MW = 107 g/mole) that weighs 150 mg is . a. 0.108 g b. 0.325 g c. 1.355 g d. 4.065 g Amount of Fe2O3 (MW = 160 g/mole) from which 150 mg of Fe(OH)3 (MW = 107 g/mole) may be obtained is . a. 0.112 g b. 0.224 g c. 0.448 g d. none of the other choices
A student was tasked to perform gravimetric analysis of a soluble sulfate. His unknown sample weighed 0.7543 g. The sample underwentprecipitation using BaCl2 and was digested for overnight. The precipitate was then filtered off to obtain white crystalline precipitate that was collected inan ash less filter paper. In performing constant weighing, he obtained a crucible mass that is 29.9442 g. After burning his samples inside the crucible,the obtained mass was 30.3375 g. Compute for the theoretical % SO3 obtained by the student and the theoretical mass (g) of SO3 that should be obtained by the student using his weighed sample
A student was tasked to perform gravimetric analysis of a soluble sulfate. His unknown sample weighed 0.7543 g. The sample underwentprecipitation using BaCl2 and was digested for overnight. The precipitate was then filtered off to obtain white crystalline precipitate that was collected inan ash less filter paper. In performing constant weighing, he obtained a crucible mass that is 29.9442 g. After burning his samples inside the crucible,the obtained mass was 30.3375 g.29. Compute for the mass (g) of BaSO4 from the experiment.A) 0.3933B) 0.3393C) 0.3133D) 0.3951E) 0.359130. Compute for the experimental mass (g) of SO3 in grams obtained by the student.A) 0.1439B) 0.1349C) 0.1943D) 0.1394E) 0.359131. Compute for the experimental % SO3 obtained by the student.A) 73.21B) 56.33C) 17.89D) 56.89E) 72.8032. Compute for the theoretical % SO3 obtained by the studentA) 0.3933B) 56.37C) 17.33D) 17.89E) 0.425233. Compute for the theoretical mass (g) of SO3 that should be obtained by the student…
You obtain an Unknown Sample from the Stockroom. You begin testing the solution through the steps outlined in the flowchart of the experiment’s PDF file. You first add HCl and centrifuge your mixture. You observe the formation of a white precipitate in the bottom of the test tube. After pouring off the supernatant liquid, you add hot water to the white precipitate. Upon addition of the hot water, you have some white precipitate still at the bottom of the test tube, and the supernatant liquid is poured off. To this liquid, potassium chromate (K2CrO4) is added. Upon this addition of potassium chromate, you observe no formation of precipitate. Which of the following is a valid conclusion to draw at this point? (Choose one.) Select one: 1. Hg22+ is definitely present. 2. Pb2+ is NOT present. 3. Ag+ is definitely present. 4. Pb2+ is definitely present.
can you explain how I can get 1.596 mg/L of concentration of Fe3+ in dilutes sample and can you also make the calibration curve.
What are the types of gravimetric methods? Give an examples where each method is used in an analysis.