As shown in the figure, the stable operating air conditioner While the environment is 32oC, it keeps the indoor environment at 21oC. Roof and the rate of heat transfer from the walls to the house Since it is 31,650 kJ / h, the compressor of the air conditioner Is 2.2 kW power input sufficient? If it is enough, Calculate COP, if not enough, theoretically Find the minimum power required in kW.

As shown in the figure, the stable operating air conditioner While the environment is 32oC, it keeps the indoor environment at 21oC. Roof and the rate of heat transfer from the walls to the house Since it is 31,650 kJ / h, the compressor of the air conditioner Is 2.2 kW power input sufficient? If it is enough, Calculate COP, if not enough, theoretically Find the minimum power required in kW.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter44: Geothermal Heat Pumps

Section: Chapter Questions

Problem 13RQ: If 14 gpm of water is flowing through an open-loop heat pump with a temperature difference of 7F,...

See similar textbooks

Similar questions

The function of the pressure tank in an open-loop, geo-thermal heat pump well system is to prevent the well pump from _____.
If 14 gpm of water is flowing through an open-loop heat pump with a temperature difference of 7F, how much heat in Btu/h is being absorbed or rejected in the heat pump? Show all work and units.
Question-3As seen in the figure, the stable air conditioner keeps the indoor environment at 21oC while the outdoor environment is 32oC. Since the heat transfer rate from the roof and walls to the house is 31,650 kJ/h, is the 2.2 kW power input to the compressor of the air conditioner sufficient? If sufficient, calculate COP, if not, find the theoretical minimum power in kW
A vapor compression refrigeration systemhas an enthalpy of saturated liquid at the hightemperature side is 341.769 kJ/kg while at lowtemperature side is 131.27 kJ/kg and a latentheat of vaporization of 1312.63 kJ/kg. If themass flow rate of refrigerant is 0.50 kg/s.compute the tons of refrigeration.
A refrigeration system with a capacity of 10 tons of refrigeration, operates at 210 kPa evaporator, while being condensed is 1240 kpa. If the refrigerator R-717 is saturated, calculate the theoretical power required to operate the compressor. compressor power =
Determine the compressor work, W,comp. And the condenser heat transfer, Qc.
The mass flow rate of the refrigerant in a Single Stage Vapor Compression (SSVC) refrigeration system is 0.015 kg/s and the evaporating and condensing temperatures shall be -20°C and 50°C, respectively. Determine the following: (1) cooling capacity in tons, (2) work of compressor in kW, (3) COP of the system, (4) EER of the system, and (5) refrigerating efficiency.
A system consists of one compressor and two evaporators. One evaporator carries a load of 35kw at 10°c and the other load of 20kw at -5°c. A back pressure value reduces the pressure in the10°c to that of the -5°c evaporator. The condensing temperature is 37°c. The refrigerant is ammonia. A. Determine the enthalpy of the refrigerant leaving the condenser. B. The massflow rate at the low-pressure evaporator. C. The mass flow rate at the high-pressure evaporator.
A refrigeration system with a capacity of 15 tons of refrigeration, operates at 150 kPa in the evaporator, while in the condenser it is 1100 kPa. If R-134a refrigerant is in a saturated state, calculate the theoretical power required to operate the compressor. Compressor Power. Answer in kW
A vacuum refrigeration system consists of a large insulated flash chamber kept at low pressure by steam ejector which pumps vapor to a condenser. Condensate is removed by condensate to an air vent. Warm return water enters the flash chamber at 13oC, chilled water comes out of the flash chamber at 5oC Vapor leaving the flash chamber has a quality of 0.97 and the temperature in the condenser is 32oC. For 350 kw of refrigeration How much vapor must the steam ejector remove from the flash chamber?
A vacuum refrigeration system consists of a large insulated flash chamber kept at low pressure by steam ejector which pumps vapor to a condenser. Condensate is removed by condensate to an air vent. Warm return water enters the flash chamber at 13oC, chilled water comes out of the flash chamber at 5oC Vapor leaving the flash chamber has a quality of 0.97 and the temperature in the condenser is 32oC. For 350 kw of refrigeration How much make-up water is needed?
A single-acting, single-cylinder air compressor is rated at 4.25 m3/min of air. The suction conditions are 1 atm and 27 C and discharge pressure is 1034 kPa. The compression process follows the equation PV1.35 = A. Determine the power, in kW, required to compress the air. B.)what is the engine kW power needed to drive the unit if the combined engine-compressor efficiency is 84%? C.)if the compressor is to run two-stage at optimum intercooler pressure with perfect intercooling, what will be percentage of power saved?