Question-3 As seen in the figure, the stable air conditioner keeps the indoor environment at 21oC while the outdoor environment is 32oC. Since the heat transfer rate from the roof and walls to the house is 31,650 kJ/h, is the 2.2 kW power input to the compressor of the air conditioner sufficient? If sufficient, calculate COP, if not, find the theoretical minimum power in kW

Question-3 As seen in the figure, the stable air conditioner keeps the indoor environment at 21oC while the outdoor environment is 32oC. Since the heat transfer rate from the roof and walls to the house is 31,650 kJ/h, is the 2.2 kW power input to the compressor of the air conditioner sufficient? If sufficient, calculate COP, if not, find the theoretical minimum power in kW

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter44: Geothermal Heat Pumps

Section: Chapter Questions

Problem 13RQ: If 14 gpm of water is flowing through an open-loop heat pump with a temperature difference of 7F,...

See similar textbooks

Similar questions

Two methods used to power refrigeration compressors on a ship are _____and ____.
If 14 gpm of water is flowing through an open-loop heat pump with a temperature difference of 7F, how much heat in Btu/h is being absorbed or rejected in the heat pump? Show all work and units.
As shown in the figure, the stable operating air conditionerWhile the environment is 32oC, it keeps the indoor environment at 21oC. Roofand the rate of heat transfer from the walls to the houseSince it is 31,650 kJ / h, the compressor of the air conditionerIs 2.2 kW power input sufficient? If it is enough,Calculate COP, if not enough, theoreticallyFind the minimum power required in kW.
Solve neatly and draw diagrams. write neatly An regenerative engine receives 68,000 kg/hr of steam having 1 open heater which receives 15,400 kg/h of Bled steam. If the condenser pressure is 0.008 MPa and the open heater pressure is 0.98 MPa find the enthalpy a) at the heater entrance, b) condenser entrance.
The first of the two heat pumps operating on the reverse Carnot cycle 0between 0C and 22oC, and the second between -18oC and 22oCis working. Find the percentage increase between the compressor powers since both are heating at the same value.
An ideal refrigeration cycle that has a condenser temperature of 25°C and an evaporator temperature of -25°C. Compute for the work input to the compressor, heat absorbed by the evaporator from the cold space, heat released to the hot space, and the COP of this refrigerator for the working fluid R-410a.
Consider an ideal refrigeration cycle that has a condenser temperature at 45oC and an evaporator temperature of -15oC. Show the process in a T-S diagram. Determine the coefficient of performance of this refrigerator for refrigerant 134a as the working fluid. Repeat the calculation for ammonia.
In a certain steam plant the turbine develops 703.72 kJ/kg. The heat supplied to the steam in the boiler is 2800 kJ/kg, the heat rejected by the steam to the cooling water in he condenser is 2100 kJ/kg and the network of the cycle is -995 kW. Calculate the pump work in kJ/kg and steam flow rate.
A refrigerator like the one shown in the figure uses refrigerant 134a as the working fluid and operates in a vapor compression refrigeration cycle with an evaporator temperature of -4ºF and a condenser pressure of 130 Psia, the adiabatic efficiency of the compressor being 90%. The mass flow of the refrigerant is 6.5 lb / min. Calculate: a) the real power supplied to the compressor, in hp b) Refrigeration capacity in Ton, c) the COP
A refrigerator cycle uses refrigerant R-134a and operates between a low-side pressure of 1.5 Bar and high side of 10 Bar. The power input to the compressor 1.88 Kw. find the refrigerant mass flow rate, condensing heat load, and COP of this machine
A 283-MW steam power plant operates on the Rankine cycle but with turbine and pump efficiencies of 90%. The steam enters the turbine at 10,000 kPa and 550°C. It discharges to the condenser at 50 kPa. Determine the thermal efficiency in percent.
A certain power plant produces a net power output of 120 MW. The constant pressure condenser operates at 8 kPa and the constant pressure boiler operates at 1 MPa. The steam enters the turbine, which operates at 88% efficiency at 600°C, and the water leaving the condenser at 8kPa enters the 72% efficient pump. Find: a) mass flow rate in kg/hr of the working fluid, b) heat suplied to the boiler in kJ/hr, c) heat rejected to the condenser in kJ/hr; I want a personalized answer so please do not copy from other's work. I need it ASAP