At a given temperature and pressure, water stream-A flows through pipeline A, while water stream-B flows through pipeline B. Both water streams arc turbulent flows. The volumetric flow rate of water stream-A differs from that of water stream-B. Pipelines A and B are made of the same material and have the same inside diameter. Based on the above information, is it possible that these two water streams will have the same value of Darcy friction factor? If yes, in what situation? Provide rational to support your answer. No calculations are required.

At a given temperature and pressure, water stream-A flows through pipeline A, while water stream-B flows through pipeline B. Both water streams arc turbulent flows. The volumetric flow rate of water stream-A differs from that of water stream-B. Pipelines A and B are made of the same material and have the same inside diameter. Based on the above information, is it possible that these two water streams will have the same value of Darcy friction factor? If yes, in what situation? Provide rational to support your answer. No calculations are required.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water at 20°C is pumped at a constant rate of 9 m3/h from a large reservoir resting on the floor to the open top of an experimental absorption tower. The point of discharge is 5 m above the floor, and friction losses in the 50-mm pipe from the reservoir to the tower amount to 2.5 J/kg. At what height in the reservoir must the water level be kept if the pump can deliver only 0.1 kW?Determine the density of water at the conditions stated in the problem (kg/m^3).
Water at 20°C is pumped at a constant rate of 9 m3/h from a large reservoir resting on the floor to the open top of an experimental absorption tower. The point of discharge is 5 m above the floor, and friction losses in the 50-mm pipe from the reservoir to the tower amount to 2.5 J/kg. At what height in the reservoir must the water level be kept if the pump can deliver only 0.1 kW.Determine the velocity of the water as it enters the top of the absorption tower.
Water at 20°C is pumped at a constant rate of 9 m3/h from a large reservoir resting on the floor to the open top of an experimental absorption tower. The point of discharge is 5 m above the floor, and friction losses in the 50-mm pipe from the reservoir to the tower amount to 2.5 J/kg. At what height in the reservoir must the water level be kept if the pump can deliver only 0.1 kW? i.At what height should the liquid level in the reservoir be? ii.Determine the velocity of the water as it enters the top of the absorption tower. iii.Determine the mass flow rate of the flowing water (in kg/s)
The pipe elbow below discharges water at rate of SN/100 (m3/s) into the atmosphere at section 2. The total volume of the passage between sections 1 and 2 is equal to 0.2 m3 and the total mass of the elbow material between sections 1 and 2 is equal to 10 x SN (kg). Neglect any friction losses. Calculate the horizontal and vertical forces acting on the elbow. Also, calculate the resultant force and angle of force on the elbow. ****SN=21
A reducing bend with an inlet diameter of 200 mm and exit diameter of 150 mm bends 40 degreesupwards. The water velocity and corresponding pressure at the inlet to the band is 4, 5 m/s and 70 kParespectively. Determine the weight flow, the water flow velocity at the exit to the bend, the bend exitpressure if the friction head loss through the bend section is 2 m and the magnitude and direction ofthe resultant force flowing through the bend.
If the velocity of flow in a 500mm diameter cast iron non-rigid pipe with modulus of elasticity of 8.30 GPa be changed in 0.25 second from 0.9 m/s to 0 m/s by closing a valve 300 m from a reservoir. If the pipe has a thickness of 20 mm and bulk modulus of elasticity of water is 2.07 GPa,determine the sonic velocity in the pipe.
A duct of rectangular cross-section 600mm X 400mm carries 90 m3/min of air having a density of 1.2 kg/m3. Determine the equivalent diameter of a circular duct, (a) when the quantity of air carried in both the cases is the same; and (b) when the velocity of air in both the cases is the same. If friction factor is 0.011, find the pressure loss per 100 m length of duct. Group of answer choices 537 mm; 480mm; 21.9 mm of water 750 mm; 408mm; 12.9 mmof water 573 mm; 840mm; 29.1 mmof water 735 mm; 804mm; 91.2 mmof water please give full solution for review and analysis
C2. A conical tube is fixed vertically with its smaller end upwards and it forms a part of the pipeline. The diameter at the smaller end is 245 mm and at the larger end is 467 mm. The length of the conical tube is 1.8 m and the flow rate of the oil is 128 liters/s. The pressure at the smaller end is equivalent to a head of 9.7 m of oil. Considering the following two cases: (1) Neglecting friction, (without head loss) determine (i) the velocity at the smaller end in m/s, (ii) the velocity at the larger end in m/s, and (iii) the pressure at the larger end of the tube. (2) If a head loss (with head loss) in the tube is hL= 0.0153(V1-V2)2, where V1 is the velocity at the smaller end and V2 is the velocity at the larger end, determine (iv) the head loss in m of oil and (v) the pressure at the larger end of the tube.
A fertilizer delivery system is shown in the figure. The hose is made of a material whose coefficient of resistance is 0.12 and has an internal diameter of 25 mm. The nozzle has an inner diameter of 30 mm. If the flow exits horizontally with a maximum horizontal range of 1.3 m and hits the ground with a velocity magnitude of 5.4 m/s. Determine a) The power supplied by the pump to the fluid. b) If the efficiency is 75%, the input power to the pump. c) The pressure at the outlet of the pump. Neglect energy losses at the pump inlet and the fluid has a relative density of 1.10.
Water enters a tank of diameter DT steadily at a mass flow rate of min. An orifice at the bottom with diameter Do allows water to escape. The orifice has a rounded entrance, so the frictional losses are negligible. If the tank is initially empty, (a) determine the maximum height that the water will reach in the tank and (b) obtain a relation for water height z as a function of time.
A liquid a constant density 900 (kg/m3) is flowing at an unknow velocity V1 (m/det) through a horizontal pipe of inside diameter 10 (cm) and at pressure 5 (kg/cm2), and then it passes to a section of pipe in which the diameter is reduced gradually to 5 (cm) and the pressure is 3 (kg/cm2). Assumsing no friction losses, calculate the velocity V2 if the pressure difference is measured
A sharp-edged orifice in the vertical wall of a large tank has a diameter of 25 mm. The coefficient of contraction is 0.620 and the coefficient of velocity is 0.98. If the jet drops 936 mm in a horizontal distance of 2.490 meter from the vena contract, Determine the power loss in watts. a. 5.26 Watts b. 3.78 Watts c. 2.5 Watts d. 1.16 Watts