PLEASE NOTE ADDITIONALTHE OPENING AT POINT C IS INCLINED 30 DEGREES FIND MAXIMUM HEIGHT AND RANGE THAT WATER CAN REACH 3. A pump draws water from a 20 cm diam suction pipe and discharges through a15 cm diam pipe in which the velocity is 3.60 m/s. The pressure is-34.465 kPaat A in the suction pipe. The 15 cm diam pipe discharges horizontally into air atC. To what height h above B can the water be raised if B is 1.8 m. above A and20 hp is delivered to the pump? Assume that the pump operates at 80 %efficiency and that the frictional loss in the pipe between A and C is 3 m.Given:Suction pipeDischarge pipe1.80 mpumpDatum lineDA = 20 cm = 0.20 mDe = Dc = 15 cm 0.15 mPA=- 34.465 KPa (suction pressure)Ve = Vc = 3.6 m/sPc 0 (atmospheric pressure)BHP = 20 hpPump efficiency = 80%HLA-C) = 3 mRequired:

Answered: Image /qna-images/answer/c57906a2-37d2-41a3-a1ec-0914f8b7223c.jpg

Answered: A pump draws water from a 20 cm diam…

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A small scale water turbine is fed by water from a dam that is 1.6 metres above the top ofthe outlet flow. The outlet is a channel which is 1.3 metres wide, and water flows in it to adepth of 0.2 metres and with a velocity of 0.8 m/s.How much power is being extracted fromthe flow?
A 25 hp suction pump operating at 70.00% efficiency draws water from a suction line whose diameter is 184 mm and discharges into the air through a line whose diameter is 134 mm. The velocity in the 134 mm line is 1.9 m/s. If the pressure at point A in the suction pipe is -28 kPa (negative sign indicates the pressure is below the atmosphere), where A is 1.8 m below B on the 134 mm line, determine the maximum elevation above B to which water can be raised assuming a head loss of 2.4 m due to friction. Show step by step explanation.
A 25Hp suction pump operating at 56.30% efficiency draws water from a suction line whose diameter is 205mm and discharges into air through a line whose diameter is 155mm . The velocity in the 155mm line is 4m/s . If the pressure at point A in the suction pipe is -32kpa (negative sign indicate the pressure is below the atmosphere), where A is 1.8m below B on the 155mm line, determine the maximum elevation above B to which water can be raised assuming a head loss of 2.9m due to friction.
Water at 22oC is pumped from the bottom of a large storage tank where the pressure is 290 kPa gage to a nozzle which is 14.17 m above the tank bottom and discharges to the atmosphere with a velocity in the nozzle of 20.1 m/s. The water flow rate is 50 kg/s. The efficiency of the pump is 77% and 9 kW are furnished to the pump shaft.a. Draw the diagram b. The friction loss in the pump. c. The friction loss in the rest of the process.(include principles used)
A pump draws water from a 20cm suction pipe and discharges through a 15cm pipe in which the velocity is 4 m/s. The pressure is -35 KPa at A. The 15cm pipe discharges into the air at C. To what height h above B can the water be raised if B is 2m above A and 25 KW is delivered to the pump? Assume that the pump operates at 70% efficiency and the frictional loss between A and C is 3 J/N.
The pipe elbow below discharges water at rate of SN/100 (m3/s) into the atmosphere at section 2. The total volume of the passage between sections 1 and 2 is equal to 0.2 m3 and the total mass of the elbow material between sections 1 and 2 is equal to 10 x SN (kg). Neglect any friction losses. Calculate the horizontal and vertical forces acting on the elbow. Also, calculate the resultant force and angle of force on the elbow. ****SN=21
The nozzle which furnished the water to a certain hydraulicturbine 275 mm in diam. and has coefficients of velocity anddischarged of 0.975 and 0.96 respectively. The nozzle suppliedfrom a 60cm pipe in which the water approached the nozzle witha total head of 330m. a. Energy per second delivered by the jet to the turbine.b. Energy measured in hp lost in passing through the nozzle.
Water at 20°C is pumped at a constant rate of 9 m3/h from a large reservoir resting on the floor to the open top of an experimental absorption tower. The point of discharge is 5 m above the floor, and friction losses in the 50-mm pipe from the reservoir to the tower amount to 2.5 J/kg. At what height in the reservoir must the water level be kept if the pump can deliver only 0.1 kW.Determine the velocity of the water as it enters the top of the absorption tower.
Water at 20°C is pumped at a constant rate of 9 m3/h from a large reservoir resting on the floor to the open top of an experimental absorption tower. The point of discharge is 5 m above the floor, and friction losses in the 50-mm pipe from the reservoir to the tower amount to 2.5 J/kg. At what height in the reservoir must the water level be kept if the pump can deliver only 0.1 kW?Determine the average velocity of the water at the starting point (on the surface of the reservoir)
Water at 20°C is pumped at a constant rate of 9 m3/h from a large reservoir resting on the floor to the open top of an experimental absorption tower. The point of discharge is 5 m above the floor, and friction losses in the 50-mm pipe from the reservoir to the tower amount to 2.5 J/kg. At what height in the reservoir must the water level be kept if the pump can deliver only 0.1 kW? i.At what height should the liquid level in the reservoir be? ii.Determine the velocity of the water as it enters the top of the absorption tower. iii.Determine the mass flow rate of the flowing water (in kg/s)
A pump takes water at 60 F from a largereservoir and delivers it to the bottom of anopen elevated tank 25 ft above the reservoirsurface through a 3-in ID pipe. The inlet tothe pump is located 10 ft below the watersurface, and the water level in the tank isconstant at 160 ft above the reservoir surface.The pump delivers 150 gal/min. If the total loss of energy due to friction in the pipingsystem is 35 ft-lb, per 1bm of fluid, calculatethe horsepower required to do the pumping.The pump-motor set has an efficiency of 55%.
A hotel builds a water fountain that is fed by a 16.0 cm diameter cylindrical pipe that carries water horizontally 9.00 m below the ground. The pipe turns upward and eventually fires water out of the 6.00 cm diameter end of the cylindrical pipe, which is located 2.00 m above the ground, with speed 32.0 m/s. (a) What is the speed of the water in the underground horizontal pipe? (b) What gauge pressure (in atm) is required in the underwater horizontal pipe for this fountain? (c) How many liters of water does this fountain release for every minute?

SEE MORE QUESTIONS

Recommended textbooks for you

Elements Of Electromagnetics

Mechanical Engineering

ISBN:

9780190698614

Author:

Sadiku, Matthew N. O.

Publisher:

Oxford University Press

Mechanics of Materials (10th Edition)

Mechanical Engineering

ISBN:

9780134319650

Author:

Russell C. Hibbeler

Publisher:

PEARSON

Thermodynamics: An Engineering Approach

Mechanical Engineering

ISBN:

9781259822674

Author:

Yunus A. Cengel Dr., Michael A. Boles

Publisher:

McGraw-Hill Education

Elements Of Electromagnetics

Mechanical Engineering

ISBN:

9780190698614

Author:

Sadiku, Matthew N. O.

Publisher:

Oxford University Press

Mechanics of Materials (10th Edition)

Mechanical Engineering

ISBN:

9780134319650

Author:

Russell C. Hibbeler

Publisher:

PEARSON

Thermodynamics: An Engineering Approach

Mechanical Engineering

ISBN:

9781259822674

Author:

Yunus A. Cengel Dr., Michael A. Boles

Publisher:

McGraw-Hill Education

Control Systems Engineering

Mechanical Engineering

ISBN:

9781118170519

Author:

Norman S. Nise

Publisher:

WILEY

Mechanics of Materials (MindTap Course List)

Mechanical Engineering

ISBN:

9781337093347

Author:

Barry J. Goodno, James M. Gere

Publisher:

Cengage Learning

Engineering Mechanics: Statics

Mechanical Engineering

ISBN:

9781118807330

Author:

James L. Meriam, L. G. Kraige, J. N. Bolton

Publisher:

WILEY

SEE MORE TEXTBOOKS