At the proportional limit, a 16 mm thick x 69 mm wide bar elongates 6.2 mm under an axial load of 485 kN. The bar is 1.5 m long. If Poisson's ratio is 0.32 for the material, determine the modulus of elasticity (in GPa). Note: Do not include units in your answer. Answer:

At the proportional limit, a 16 mm thick x 69 mm wide bar elongates 6.2 mm under an axial load of 485 kN. The bar is 1.5 m long. If Poisson's ratio is 0.32 for the material, determine the modulus of elasticity (in GPa). Note: Do not include units in your answer. Answer:

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.5.1P: The rails of a railroad track are welded together at their ends (to form continuous rails and thus...

See similar textbooks

Related questions

Q: Question 4 A concrete cylinder with a diameter, &, of 133 mm and height, h, of 339 mm is axially…

Q: An arbitrary material has an elastic modulus of 118 GPa. How much tensile force was applied to a 100…

A: Given data:

Q: steel band 8mm thick is to be pulled on to a cylinder 30cm in diameter . The internal diameter of…

Q: A circular rod 16 mm dia and 500 mm long is subjected to a tensile load of 40 kN. The modulus of…

Q: Calculate the total elongation of the bar. Its modulus of elasticity is 70 GPa and the cross…

A: Given data: The cross-sectional area of the bar, A = 600 mm2. Modulus of elasticity of the bar, E =…

Q: A cylinderbar of steel,10 mm in diamter is to be defromed elastically by application of a force…

A: Given Data⇒ Diameter of cylinder bar(d)=10 mm=0.01 m Elastic reduction ∆d=0.003 mm∆d=0.003×10-3 m…

Q: At the proportional limit, a 18 mm thick x 82 mm wide bar elongates 7.1 mm under an axial load of…

Q: A cylindrical rod of steel (E = 207 GPa) having a yield strength of 310 MPa is to be subjected to a…

A: E = 207 GPa Yield strength = 310 MPa Load = 10000 N Original length = 500 mm Elongation = 0.35 mm

Q: A small room is made up of rectangular metal bars. One bar has a width of 10 mm and would be able to…

A: Given:w=10 mmσc=20 MPa

Q: A steel bar 100 mm long and having a square cross section 20 mm on an edge is pulled in tension with…

A: Given data: The length of the bar, L = 100 mm. The side of square, a = 20 mm. The applied load, P =…

Q: A steel rod of diameter 40 mm is subjected to a axial load of 60 N. The length of the rod is 10 m…

A: Given data: - The diameter of the rod is d = 40 mm. The axial load is P = 60 N. The length of the…

Q: (a) Determine the indentation diagonal length when a load of 0.60 kg produces a Vickers HV of 400.…

Q: If a force of 300 kN is applied to the top of a circular steel bar with a diameter of 150mm and a…

A: Given: Now, Tensile force:

Q: A 25 mm diameter bar is subjected to an axial tensile load of 100KN. Under the action of this load a…

A: Since you have posted multiple independent questions we will solve the first question for you To get…

Q: 12. A column of length 18" and a diameter of 0.25" was tested with both ends pinned. The measured…

A: Given- Length (L) = 18 inch Diameter (d) = 0.25 inch E = 29000 ksi = 29000000 lbs/in2 Case 1 -…

Q: A bar is 500 mm long and is stretched to 505 mm with a force of 50 kN. The bar is 10 mm diameter.…

Q: Consider a 1 m-long bar of 2024-T81 aluminum alloy with a 20mm-diameter and the following property…

Q: To support a tensile load of 65 kN, a metallic rod with a circular cross section and a length of…

Q: 20. The young’s modulus of nickel is 209 gpa. Determine the length of the bar (in mm) when a force…

Q: You are given a square rod of 6061-T6 aluminum (cross-section = 4mm X 4mm, length = 2.3m). The…

Q: A metallic bar of 1 cm diameter, when tested under an axial pull of 10 kN, was found to reduce its…

A: ...

Q: A copper rod [E= 110 GPa] originally 599 mm long is pulled in tension with a normal stress of 278…

Q: A 0.013 m diameter, 0.5 m long cylindrical metal bar is subjected to a compressive force of 8,500 N.…

Q: A steel bar is stressed to 280 MPa. The modulus of elasticity is 205 GPa. The bar is 80 mm diameter…

A: Given data : Length (L)=240 mm Modulus of elasticity (E)=205 GPa Diameter (d)=80 mm Stress (σ)=280…

Q: A bar subjected to a stress of 1 GPa develops an elongation of 5mm. If the initial length of the bar…

Q: See the set of bars for made of a material that has a yield strength of 350 MPa, determine the…

Q: A cylindrical specimen of a titanium alloy having original diameter of 2.96 mm experiences elastic…

Q: A bar having a length of 125 mm and cross-sectional area of 467.5 mm² is subjected to an axial force…

Q: At the proportional limit, a 18 mm thick x 70 mm wide bar elongates 6.8 mm under an axial load of…

Q: To support a tensile load of 65 kN, a circular cross section and A metallic rod with a length of…

Q: Please answer both 1 and 2 as they relate to eachother. thank you in advance

A: Write the properties of 1040 steel.

Q: At the proportional limit, a 24 mm thick x 69 mm wide bar elongates 6.8 mm under an axial load of…

A: Given that , Elongation =6.8mmAxial load=453kN Length of bar l=1.8m Poison ratio=0.3

Q: A bar of mild steel 200 mm long and 50 mm × 50 mm in cross section is subjected to an axial load of…

A: Given, Length of bar = L = 200 mm Cross-sectional area of bar = A = 50 mm x 50 mm = 2500 mm2 Axial…

Q: A steel bar 100 mm long and having a square cross section 20 mm on an edge is pulled in tension with…

A: Q.1) Given, a steel bar of square cross section of side, b=20mm Length of the steel bar, l0=100mm…

Q: In a standard tensile test a steel rod of 7/8 in. in diameter is subjected to a tension force of 17…

A: given data - v= 0.25 to determine - ratio of G/D

Q: A 35 kN axial load is applied to a metal bar with a rectangular cross-section, 28mm wide by 10mm…

A: To find: The original length of the bar. Given: The load is P=35 kN. The width is 28 mm and…

Q: An axial load of 100 kN is applied to a flat bar 20 mm thick, tapering in width from 120 mm to 40 mm…

Q: Two vertical wires are suspended at 450 mm apart. Their lower ends support a rigid horizontal bar…

Q: At the proportional limit, a 18 mm thick 84 mm wide bar elongates 6.9 mm under an axial load of 495…

A: The change in width of the bar is -0.1242 mm.

Q: 19 Consider a cylindrical specimen of some hypo- thetical metal alloy that has a diameter of 10.0 mm…

A: Problem is based on strength of material and can be solved as :

Q: (a) A 25 mm diameter bar is subjected to an axial tensile load of 100KN. Under the action of this…

A: Given Data⇒Diameter of bar d=25 mmAxial tensile load F=100 KNGauge Length L=200 mmChange in length…

Q: A rod is subjected to a uniaxial load within linear elastic limit. When the change in the stress is…

A: Given data: The change in stress, σ=200 MPa. The change in strain, ε=0.001. The Poisson's ratio,…

Q: A tensile load of 1700 N is applied to a cylindrical specimen of a metallic 1) alloy. The initial…

Q: To support a tensile load of 65 kN, a metallic rod with a circular cross section and a length of…

A: If two design criteria are given for a system, the design should be made on the criteria that give…

Q: 9. For a given material, the modulus of elasticity is 15,000,000 psi in tension and 6,000,000 psi in…

A: Given Data E=15000000 psi G=6000000 psi

Q: An aluminum wire of length 2.0 m and diameter 5 mm is used to hang a load of 100 kg. The modulus of…

Q: A copper rod [E= 113 GPa] originally 606 mm long is pulled in tension with a normal stress of 242…

A: GivenE=113 GPaL=606mmσ=242 MPa

Q: A 2000 kg load is applied to a steel bar of cross-sectional area 6 cm². When the same load is…

A: Load on steel bar and aluminum bar, M=2000 kgCross-sectional area of steel bar, As=6 cm2=6*10-4…

Q: To support a tensile load of 65 kN, a metallic rod with a cross-sectional area of Circle and a…

A: Given dataMaximum tensile load on the rod P = 65kNCross sectional area A = ?Length of the rod L =…

Q: What will be the elongation of a steel bar 40mm x 40mm square section when it is subjected to an…

A: Given:- Length of the steel bar (L) = 2 m = 2000 mm Modulus of elasticity of steel bar (E) = 200…

Concept explainers

Conduction and Convection

When energy travels from one object to another it is said to have undergone heat transfer. Heat transfer is nothing but the transfer of thermal energy or internal energy from one thing to another, like e.g., when a vessel with water, kept on top of a burner, heats up because of the flame underneath it.

Question

100%

At the proportional limit, a 16 mm thick x 69 mm wide bar elongates 6.2 mm under an axial load of 485 kN. The bar is 1.5 m long. If Poisson's
ratio is 0.32 for the material, determine the modulus of elasticity (in GPa).
Note: Do not include units in your answer.
Answer:

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

To support a tensile load of 65 kN, a metallic rod with a circular cross section and a length of 0.32 m will be used. It is desirable that the tension in the bar should not exceed 240 MPa and the maximum elongation should be 0.42 mm. What is the minimum rod diameter [m] in these conditions? Calculate. (For a metallic bar, take the elastic modulus as 220 GPa).
(a) A 25 mm diameter bar is subjected to an axial tensile load of 100KN. Under the action of this load a 200 mm gauge length is found to extend 0.19 x 10-mm. Determine the modulus of elasticity for the bar material.
A bar subjected to a stress of 1 GPa develops an elongation of 5mm. If the initial length of the bar is 1m, calculate the elastic modulus of the bar.
If a force of 300 kN is applied to the top of a circular steel bar with a diameter of 150mm and a length of 300mm, reducing the length of the reaxial direction by 0.16mm, and increasing the diameter of the cross section by 0.01mm, what is the modulus of elasticity E and poisson's ratio of the steel rod?
A tensile force of 200 KN is applied on a 0.02-m diameter and.2-m long rod. After applying the load, the diameter of the rod decreases to 0.01998 m and the length increases to 2.01 m. Assuming no permanent deformation occurs in that material, the modulus of elasticity (GPa) is?
A cylindrical specimen of a titanium alloy having an elastic modulus of 207gpa and an original diameter 3.8mm will experience only am elastic deformation when a tensile load of 2000pa is applied. Compute the maximum length of the specimen before deformation if the maximum allowable elongation is 0.47mm
2. A bar of thickness 15mm and having a rectangular cross-section carries a load of 120kN. Determine the minimum width of the bar to limit the stress to 200MPa. The bar, which is 1m long, extends by 2.5mm when carrying a load of 120kN. Determine the modulus of elasticity of the material of the bar.
A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa and an original diameter of 10.2 mm experiences only elastic deformation when a tensile load of 8900 N is applied. Compute the maximum length of the specimen in mm before deformation if the maximum allowable elongation is 0.45 mm.
A tensile load of 190 kN is applied to a round metal bar with a diameter of 16 mm and a gage length of 50 mm. Under this load the bar elastically deforms so that the gage length increases to 50.1349 mm and the diameter decreases to 15.99 mm. Determine the modulus of elasticity and Poisson"s ratio for this metal.
If the axial rigidity of steel bar of 1m length is 200 x 107 N, what will be the axial flexibility of the bar?
To support a tensile load of 65 kN, a metallic rod with a circular cross section and a length of 0.32 m will be used. It is required that the tension in the bar does not exceed 240 MPa and the maximum elongation is 0.42 mm. What is the minimum rod diameter [m] in these conditions? (Elasticity for metallic bar take the module as 220 GPa).
A cylinderbar of steel,10 mm in diamter is to be defromed elastically by application of a force along the bar axis (axial loading) .determine the force that will produce an elastic reduction of 0.003 mm in the diameter.The poisson's ratio is 0.30 and the modulus of elasticity is 207 Gpa for carbon steel.