b) A rectangular block of 1200 mm² cross-sectional area is subjected to a longitudinal compressive load of 1200kN. Determine the normal stress across the cross section of the block. If the block is cut by an oblique plane making an angle of 400 with normal section of the block. Determine: (i) Normal stress on the oblique plane (ii) Tangential stress along the oblique plane, and (iii) Resultant stress on the oblique plane.

b) A rectangular block of 1200 mm² cross-sectional area is subjected to a longitudinal compressive load of 1200kN. Determine the normal stress across the cross section of the block. If the block is cut by an oblique plane making an angle of 400 with normal section of the block. Determine: (i) Normal stress on the oblique plane (ii) Tangential stress along the oblique plane, and (iii) Resultant stress on the oblique plane.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Determine the average normal stress developed on the cross section as shown inFigure 1.
A 10 ft x 15 ft rectangular area carrying a uniform load of 5000 psf is applied to the ground surface. Compute the vertical stress increment due to this load at a depth of 20 ft below the ground surface by the approximate method. a. 714 b. 232.49 c. 60 d. 144.8
1. What is the maximum shearing stress (fv) of the beam? (in MPa) 2. What is the maximum flexural stress (fb) of the beam? (in MPa)
Find stress at BD, BE, CE area = 0.0012 m^3
Two line loads are applied on the given profile with the stress increase determined to be 42 kPa at point A. What is the value of line load q2 (kN/m)?
A short rectangular post supports a compressive load of P = 175 kN as shown. A top view of the post showing the location where load P is applied to the top of the post is also shown. Determine the vertical normal stress at corner d of the post.
Determine the maximum average shear stress developed in 30mm diamter pin
According to the general shear stress formua, shear stress distribution on a rectangular crosss section is parabolic. When b = 47 mm, h = 79 mm, transverse shear force V = 69 k N, please calculate the max shear stress on the cross section shown below: max (f v max in textbook)= ____ MPa.
Use Boussinesq’ solution to determine the vertical stress. The load is N = 2,016 kN
a vertical cylindrical steel tank is 3m in diameter and 6m tall, the walls of the tank have thickness of 12mm. -Determine the tangential stress in the walls when the tanks is filled with water? -what is the longitudinal stress in the walls when the tanks is filled with water?
Determine the horizontal shearing stress at 95 mm above the Neutral Axis.
Calculate the increase in the vertical stress at A due to the two line loads acting on the footing as given in the figure.