where Q, is the heat flow rate through the stab. Find U as a function of the therFnialThe slab is exposed to two fluids of temperature T, and T; the hent transfer coefficient is(5)therdefined by=DAU(Ta-T)inte (c) Consider the steady-state heat conduction through a composite slab made of threererent materials A. B. and C. cach having its own thermal conductivity kA. ky and kespectively. A portion of the slab is shown in the Figure below.TaAreaT1.T25T3T4TbX3Distance, xX1X2X4FluidFluidat Taat TbFigure. Layers in a composite slab.AdjaotteTemperature, T

Answered: Image /qna-images/answer/59c719c1-7a4c-4209-bc3b-aa3180435956.jpg

(c) Consider the steady-state heat conduction through a composite slab nade of three Terent materials A. B. and C. cach having its own thermal conductivity kA. kn and ke spectively. A portion of the slab is shown in the Figure below. Ta Area Ti T2 T3 Temperature, T

(c) Consider the steady-state heat conduction through a composite slab nade of three Terent materials A. B. and C. cach having its own thermal conductivity kA. kn and ke spectively. A portion of the slab is shown in the Figure below. Ta Area Ti T2 T3 Temperature, T

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter2: Steady Heat Conduction

Section: Chapter Questions

Problem 2.18P: Estimate the rate of heat loss per unit length from a 5-cm ID, 6-cm OD steel pipe covered with...

See similar textbooks

Related questions

Q: Heat is uniformly generated at the rate of 2 × 10° W/m³ in a wall of thermal conductivity 25 W/m•K…

A: Given Data: q=2×105w/m3 T∞,1=30°c k=25 w/m-k…

Q: Consider steady-state heat conduction through a cylindrical wall The fluid on the insit Kat 590 K…

A: As per policy, we can solve the first one from multiple questions.

Q: Consider 1-D steady heat conduction in a composite plane wall (shown below) consisting of two layers…

A: Given:-Two layers A and BNode 0=InteriorNode 2=Mid of layerNode 2=Surrounding To find:-Finite…

Q: The door of a domestic refrigerator has an area of 0.7 m^2 and is made of a thin metal sheet with…

Q: The wall of shed in which ice is stored consists of an outer layer of wood 2cm and an inner layer of…

Q: Consider a short cylinder of 10.0cm diameter and 5.0cm length with a thermal conductivity of k = 10…

A: Diameter = 10 cm = 0.1 m Length = 5 cm = 0.05 m k = 20 W/m.K h = 20 W/m2K Rate of heat generation =…

Q: 2.11 Consider steady-state conditions for one-dimensional conduction in a plane wall having a…

A: ASSUMPTIONS: (1) Steady-state conditions (2) One-dimensional conduction (3) No internal heat…

Q: A solid block is with 0.2 m thick and 0.1 m cross section area and 100W/m C thermal conductivity.…

Q: 'Calculate the energy transfer rate across 6 in. wall of firebrick with a temperature difference…

A: Given data: x=6 in∆T=50=122°Fk=0.65 Btu/hr.ft.°F Need to determine the energy transfer rate.

Q: A spherical, 3 mm cryogenic probe at temperature -30°C is embedded into skin at 37°C. Frozen tissue…

A: Write the given values along with the suitable variables.

Q: An isolating wall (made up of 2-10mm thick plywood with 5mm woven silica sheet in between) encloses…

A: Given:Thickness of 1st plywood, t1=2 mmThickness of the silica sheet, t=5 mmThickness of 2nd…

Q: (A) A plane wall is 1.25 cm thick and has on surface (x-0) maintained at a constant temperature of…

A: Data given- L = 1.25 cm T1 = 82°C T2 = 92°C K = 52.4 W/mK Qg = 88.78 × 106 W/m3

Q: Consider a thin cylindrical one-dimensional cable with constant thermal properties and constant…

A: Solution: To Derive:

Q: A polished metal pipe 5 cm outside diameter and 370 K temperature at the outer surface is exposed to…

A: As per given Dia=5cm Surface temperature =370k Ambient temperature =295k Emmissivity=0.2 Calculate…

Q: Consider a homogeneous spherical piece of radioactive material of radius ro = 0.04 m that is…

Q: The steady state temperature3/3 distribution in a one dimensional wall of thermal conductivity…

A: Write the expression of temperature distribution of one dimensional wall. T=a+bx2 Write the…

Q: A hollow cylindrical insulation of inside diameter 0.2 m and outside diameter 0.4 m conducts heat…

Q: he aluminum fins (k= 240 W/m.K) have been placed on one side of an electronic device (100 fins per…

A: k=Thermal conductivity of aluminum fins=240 W/m-Kt=Thickness of fins=0.25 cm=0.0025 mL=Length of…

Q: A very long copper rod 20 mm in diameter extends horizontally from a plane heated wall maintained at…

Q: calculate the heat transfer rate per unit length of a cylindrical wall of inner and outer radius as…

A: It is given in the data that inner radius is r1=0.1 m and outer radius is r2=0.2 m. Thermal…

Q: A cylindrical resistor element on a circuit board dissipates 0.22 W of power in an environment at…

A: Heat flux (Ф) is the rate of heat energy transmission via a particular surface (W), whereas heat…

Q: The steady-state temperature distribution in a one[1]dimensional wall of thermal conductivity 50 W…

Q: One end of a 40 cm metal rod 2.0 cm2 in cross section is in a steam bath while the other end is…

Q: A copper rod of thermal conductivity 360 / mK, diameter 10 cm and length 40 cm acts as a stiffener…

Q: An isolating wall (made up of 2-10mm thick plywood with 5mm woven silica sheet in between) encloses…

A: Heat transfer Heat transfer is the process in which heat is transfer from hot body to cold body or…

Q: long cylinder of radius 150 mm and at an initial uniform temperature of 530 ° C is suddenly exposed…

Q: a) A house walls that are 24 cm thick and have an average thermal conductivity twice that of glass…

A: (a) Write the given data with suitable variables. t=24 cm=0.24 m100 cm1 mA=900000 cm2=90 m210000…

Q: The steady-state temperature distribution in a one-dimensional slab of thermal conductivity 50 *…

A: Given Data⇒Thermal conductivity(K)=50Wm-KThickness L=50 mm=0.050 msteady-state temperature…

Q: spherical container is made of plastic (k=2 W/mK, ρ=5000 kg/m) and has inner and outer radii of 10…

A: Given DataRi=10cmRo=11cmk=2 W/mKρ=5000 kg/mc=3000 J/kgK ρ=800 kg/m3h=5 W/m2K

Q: Calculate the heat transfer per hour though a solid brick wall 6.9m long, 1.5m high and 216mm thick,…

A: Solution:

Q: A long solid rod of 20 mm diameter was inserted into a furnace while the other end was projecting…

Q: How can you find the thermal conductivity of a metal bar in experimentally?

A: Hi and thanks for the question. Since you have asked multiple questions, we will solve the first…

Q: The wall of an industrial furnace is constructed from 0.15-m-thick fireclay having a thermal…

A: Given Data⇒ Thickness of wall ∆x=0.15 m Thermal conductivityk=1.7Wm-k Wall dimensions : a=0.5 mb=1.2…

Q: The roof of a house absorbs a solar radiant flux of 600 W/m", while the underside to the ceiling is…

A: Q= h A ( T2-T1) q= Q/A = h( T2-T1)

Q: One-dimensional heat transfer through a composite wall is shown in the following figure. Please…

Q: A wall is constructed of a section of stainless steel [k = 16 W/m · °C] 4.0 mm thick with identical…

A: thick = 4 mm k = 16 W/m C Overall heat transfer coefficient = 120 W/m2 C Overall temperature…

Q: Plate glass 5 mm thick at 200°C is to be cooled from both sides using air at 40°C. If surface cracks…

Q: 8. A large block of concrete with a thickness of 50 cm is exposed to thermal ra- diation resulting…

A: Given data: b=50 cmT1=100°CT2=50°Ck=1.4 W/m2.K Need to determine the steady state heat transfer and…

Q: The rate of heat generation in a slab of thickness 160 mm (k = 180 W/m °C) is 1.2 MW/m3. If the…

A: Given data:-Thickness t=160mm K=180w/m°c heat generation q=1.MW/m3 Temperature =120°…

Q: Calculate the heat transfer rate when a steel pipe conveying steam is insulated. The pipe has an…

A: GIVEN DATA- The pipe has an inside diameter of 20 cm, and an outside diameter of 30 cm insulation…

Q: Consider steady-state conditions for one-dimensional conduction in a plane wall having a thermal…

Q: Heat Loss by Convection and Conduction.A glass window with an area of 0.557 m2is installed in the…

Q: An insulated steam pipe is covered with two layers of insulation as seen figure below. Draw the…

A: The above question is based on heat conduction and convection radially with two layers of…

Concept explainers

Conduction and Convection

When energy travels from one object to another it is said to have undergone heat transfer. Heat transfer is nothing but the transfer of thermal energy or internal energy from one thing to another, like e.g., when a vessel with water, kept on top of a burner, heats up because of the flame underneath it.

Question

100%

where Q, is the heat flow rate through the stab. Find U as a function of the therFnial
The slab is exposed to two fluids of temperature T, and T; the hent transfer coefficient is
(5)
ther
defined by
=DAU(Ta-T)
inte

(c) Consider the steady-state heat conduction through a composite slab made of three
rerent materials A. B. and C. cach having its own thermal conductivity kA. ky and ke
spectively. A portion of the slab is shown in the Figure below.
Ta
Area
T1.
T25
T3
T4
Tb
X3
Distance, x
X1
X2
X4
Fluid
Fluid
at Ta
at Tb
Figure. Layers in a composite slab.
Adjaotte
Temperature, T

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The handle of a ladle used for pouring molten lead is 30 cm long. Originally the handle was made of 1.9cm1.25cm mild steel bar stock. To reduce the grip temperature, it is proposed to form the handle of tubing 0.15 cm thick to the same rectangular shape. If the average heat transfer coefficient over the handle surface is 14 W/m K, estimate the reduction of the temperature at the grip in air at 21C.
One end of a 0.3-m-long steel rod is connected to a wall at 204C. The other end is connected to a wall that is maintained at 93C. Air is blown across the rod so that a heat transfer coefficient of 17W/m2 K is maintained over the entire surface. If the diameter of the rod is 5 cm and the temperature of the air is 38C, what is the net rate of heat loss to the air?
2.29 In a cylindrical fuel rod of a nuclear reactor, heat is generated internally according to the equation where = local rate of heat generation per unit volume at r = outside radius = rate of heat generation per unit volume at the centerline Calculate the temperature drop from the centerline to the surface for a 2.5-cm-diameter rod having a thermal conductivity of if the rate of heat removal from its surface is 1.6 .
An electronic device that internally generates 600 mW of heat has a maximum permissible operating temperature of 70C. It is to be cooled in 25C air by attaching aluminum fins with a total surface area of 12cm2. The convection heat transfer coefficient between the fins and the air is 20W/m2K. Estimate the operating temperature when the fins are attached in such a way that (a) there is a contact resistance of approximately 50 K/W between the surface of the device and the fin array and (b) there is no contact resistance (in this case, the construction of the device is more expensive). Comment on the design options.
1.10 A heat flux meter at the outer (cold) wall of a concrete building indicates that the heat loss through a wall of 10-cm thickness is . If a thermocouple at the inner surface of the wall indicates a temperature of 22°C while another at the outer surface shows 6°C, calculate the thermal conductivity of the concrete and compare your result with the value in Appendix 2, Table 11.
2.43 A turbine blade 6.3 cm long, with cross-sectional area and perimeter , is made of stainless steel . The temperature of the root, , is . The blade is exposed to a hot gas at , and the heat transfer coefficient is K. Determine the temperature of the blade tip and the rate of heat flow at the root of the blade. Assume that the tip is insulated.
1.51 The inner wall of a rocket motor combustion chamber receives by radiation from a gas at . The convection heat transfer coefficient between the gas and the wall is . If the inner wall of the combustion chamber is at Problem 1.51 a temperature of , determine (a) the total thermal resistance of a unit area of the wall in and (b) the heat flux. Also draw the thermal circuit.
Derive an expression for the temperature distribution in an infinitely long rod of uniform cross section within which there is uniform heat generation at the rate of 1 W/m. Assume that the rod is attached to a surface at Ts and is exposed through a convection heat transfer coefficient h to a fluid at Tf.
1.4 To measure thermal conductivity, two similar 1-cm-thick specimens are placed in the apparatus shown in the accompanying sketch. Electric current is supplied to the guard heater, and a wattmeter shows that the power dissipation is 10 W. Thermocouples attached to the warmer and to the cooler surfaces show temperatures of 322 and 300 K, respectively. Calculate the thermal conductivity of the material at the mean temperature in W/m K. Problem 1.4
2.9 In a large chemical factory, hot gases at 2273 K are cooled by a liquid at 373 K with gas-side and liquid-side convection heat transfer coefficients of 50 and , respectively. The wall that separates the gas and liquid streams is composed of a 2-cm thick oxide layer on the gas side and a 4-cm thick slab of stainless steel on the liquid side. There is a contact resistance between the oxide layer and the steel of . Determine the rate of heat loss from hot gases through the composite wall to the liquid.
1.1 On a cold winter day, the outer surface of a 0.2-m-thick concrete wall of a warehouse is exposed to temperature of –5°C, while the inner surface is kept at 20°C. The thermal conductivity of the concrete is 1.2 W/m K. Determine the heat loss through the wall, which is 10-m long and 3-m high. Problem 1.1
2.7 A very thin silicon chip is bonded to a 6-mm thick aluminum substrate by a 0.02-mm thick epoxy glue. Both surfaces of this chip-aluminum system are cooled by air at , where the convective heat transfer coefficient of air flow is . If the heat dissipation per unit area from the chip is under steady-state conditions, draw the thermal circuit for the system and determine the operating temperature of the chip.