5. The following staff reading were observed successively with a level, the instrument having beenmoved after third, sixth and eighth readings: 2.228, 1.606; 0.988; 2.090; 2.864; 1.262; 0.602; 1.982;1.044; 2.684 metres. Enter the above readings in the page of a level book and calculate the R.L. ofpoints if the first reading was taken with a staff held on a bench mark of 432.384m. *(5 Points)↑ Upload file

Given: benchmark=432.384 To find: Fill level book and calculate RL of points

Answered: calculate the R.L.

Engineering

Civil Engineering

calculate the R.L.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Situation 1: A two-peg test is used to check whether the ine of sight of the level is in perfect adjustment and the following rod readings are taken, with instrument set up near A, backsight on A is 1.623 m. and foresight reading on B is 2.875 m. With the instrument set up near B, backsight on B is 1.622 and a foresight on A is 0.362 m. a. Find the difference in elevation. b. What should be the correct rod reading on A to give a level line of sight with instrument still set up near B? c. What should be the correct rod reading on B to give a level line of sight with instrument still set up near A?
A horizontal collimation test is performed on an automatic level following the procedures described in Section 4.15.5. With the instrument setup at point 1, the rodreading at A was 3.886 ft, and to B it was 3.907 ft. After moving and leveling the instrument at point 2, the rod reading to A was 4.094 ft and to B was 4.107 ft. What isthe collimation error of the instrument and the corrected reading to A from point 2?
The following readings are taken from an Auto level from an uneven field. Find the Reduced Level of all these points. Given the BM of the field is 1807.85m. The instrument is shifted after 2nd , 4th, 7th and 9th stations. 1.20, 2.03, 3.86, 1.52, 5.47, 2.69, 7.16, 6.47, 4.52, 3.77, 4.19m
The following staff readings were observed successively with a level. The instrument has been shifted after the second and fifth reading: 0.675, 1.230, 0.750, 2.565, 2.225, 1.935, 1.835, 3.220. The first reading was with staff held on benchmark of RL 100.000 m. Enter the readings in a page of level book and calculate the RL of all points. Apply arithmetic checks. Use plane of collimation method.
The following consecutive readings were taken with a level on a 4m staff on a continuously slopping ground at an interval of 20m: 0.650, 1.535, 1.850, 2.435, 2.995, 3.350, 1.150, 1.850, 2.045, 3.635, 0.905, 1.055, 1.750, 2.04, 2.550. The RL of first point A is 100.780m rule out a page of level field book and record the above reading. Calculate the reduced level of last points by rise and fall methods? Please solve this question
A tacheometer was set up at B.M and the following observations were made with a leveling staff held vertically at P and Q. Ins: Station Staff Station Vertical Angle Hair Readings Bearings Remarks B.M P +10° 00’ 1.050, 1.103, 1.156 40° R.L of B.M =1958.500 ft Q -15° 00’ 0.952, 1.055, 1.158 140° The constant of instrument (f/i) = 100, Height of instrument = 5.15 ft Compute: The horizontal distance between P and Q Reduced Levels of P and Q Grade between P and Q
The following readings were observed successively with a leveling instrument. The instrument was shifted after the fifth and eleventh readings.0.485, 1.210, 1.635, 3.395, 3.775, 0.650, 1.400, 1.795, 2.575, 3.375, 3.895, 1.735, 0.635, 1.605 mDetermine the R.L of various points and show the entries in a level book, if the R.L of the first point is 100m, using the rise and fall method.
The following consecutive readings were taken with a level and a 4mt. leveling staff on acontinuously sloping ground at common intervals of 30 m:0.855(onA),1.545,2.335,3.115,3.825,0.455,1.380,2.055,2.855,3.455,0.585,1.015,1.850,2.755,3.845(on B)Enter the readings on a level field book and work out the staff readings on that, Find theR.L of different points using Collimation Plane Method. RL of the BM is 200.000m.Calculate the slope of the ground.
Apply “Rise and Fall method” for working out the reduced levels of points for which the following consecutive readings were taken with a level. 0.894, 2.643, 2.896, 4.016, 1.954, 0.692, 2.582, 0.251, 1.532, 2.996, 1.135 The instrument was shifted after the 2nd, 4th, 6th and 8th readings. The first reading was taken on the staff held on the bench mark of R.L. equal to 5757. Rule out a page of level field book and enter the above readings
A dumpy level with an internal focusing telescope was set up on the left bank of the river and the rod readings tabulated below were taken on a stadia rod held successively at the left and right water edges. If the stadia interval factor is 100, determine the width of the river. Draw the diagram
Compute for HD if the upper, middle and lower hair readings in a three-wire levelling are 2.79m, 2.42m, and 2.06m respectively. Assume standard or usual values of K and C.
The following readings were successively taken in levelling work 2.230, 1.605, 0.990, 2.090, 2.865 level instrument was shifted after 3rd reading. If R.L of first station 100.000 m, the R.L of other stations will be Option 1: 100.625, 101.240, 100.140 Option 2: 101.605, 100.990, 102.090, 100.865 Option 3: 100.230, 100.625, 101.240, 100.465 Option 4: 100.625, 101.240, 100.465