Christmas Express makes wreaths in batch sizes of 10. The cutting and assembly process takes 5 minutes per wreath, and the decorating process time is 10 minutes per wreath. It takes 5 minutes to move the wreaths from the cutting and assembly process to the decorating process. a. Compute the value-added, non-value-added, and total lead times of the wreath process. Value-added lead time Non-value-added lead time: Move time Within-batch wait time minutes Total lead time b. Compute the value-added ratio. Round to one decimal place. % minutes
Q: Craig has decided to start snow plowing during the winter months. He purchased a heavy-duty dump…
A: As per IRS publication 946, Chapter 4, Under Property Classes, the suggested life of the heavy truck…
Q: Stockholders' equity Paid-in capital Retained earnings Before Action Outstanding shares $ Total…
A: A stock dividend is a method of capitalizing the retained earning. There will be no distribution of…
Q: [The following information applies to the questions displayed below.] Markus Company's common stock…
A: The ratio analysis helps to analyse the financial statements of the business on the basis of various…
Q: Required: You have been asked to provide financial statements for the upcoming County Board meeting…
A: Accounting process is being followed- 1. Journal entries 2. T accounts 3. Financial statements
Q: e joint costs using the ces and round the final allocations to the nearest dollar.…
A: COST ALLOCATION When item of cost are Identifiable directly with some products or departments such…
Q: [The following information applies to the questions displayed below.] B-You is a consulting firm…
A: Analyzing based on considerations other than costs involves evaluating various factors beyond just…
Q: The following data from the just completed year are taken from the accounting records of Mason…
A: Income Statement :— It is one of the financial statement that shows profitability, total revenue and…
Q: Waterway Corporation manufactures safes-large mobile safes, and large walk-in stationary bank safes.…
A: There are two methods for allocating overhead cost to the products i.e. 1)Traditional 2)ABC costing.…
Q: interest rate of i = 0.03. What is the minimum interest rate that the lender will charge to borrow…
A: To determine the minimum interest rate that the lender will charge to borrow money in this economy,…
Q: Haas Company manufactures and sells one product. The following information pertains to each of the…
A: "Since you have posted a question with multiple sub-parts, we will solve first three sub-parts for…
Q: Bonita Company has two classes of capital stock outstanding: 8%, $20 par preferred and $5 par…
A: Stockholder's Equity - Stockholder's Equity includes the amount contributed by shareholders issued…
Q: Below are amounts (in millions) from three companies' annual reports. Ending Accounts Receivable…
A: Receivables turnover ratio is the one which is determined by the entity to check to efficiency of…
Q: In October, Nicole eliminated all existing inventory of cosmetic items. The trouble of ordering and…
A: The ending inventory comprises the cost of goods that remains unsold at the end of the accounting…
Q: Sheffield Inc. recently hired a new accountant with extensive experience in accounting for…
A: The journal entries are prepared to record the transactions on regular basis. The treasury stock…
Q: Required: a. Indicate the amount and effect of each transaction on total assets, total liabilities,…
A: Accounting Equation is a statement which helps us in analyzing the effect of each transaction on the…
Q: XYZ Company made expenditures for the following: Costs in activities aimed at obtaining new…
A: R&D plays a vital role in fostering innovation and driving competitive advantage. It enables…
Q: The owner of a building supply company has requested a cash budget for June. After examining the…
A: Cash Budget is that budget which helps in every organisation to maintain Cash balance for day to…
Q: On January 1, 2022, the Bonita Company budget committee has reached agreement on the following data…
A: The direct material purchase budget is the statement which is prepared by the entity for the purpose…
Q: The manager at Rainbow International prepares a Cost of Quality report to report the following…
A: Every business wants to improve its process with effectiveness and efficiency. For the same the…
Q: 15 Required information [The following information applies to the questions displayed below.] Markus…
A: Average inventory :— It is calculated by dividing sum of ending balance of inventory and beginning…
Q: Required: 1. If 50,000 machine hours are available, and management desires to follow an optimal…
A: A Manufacturing Entity has to do proper cost and benefit analysis before starting its manufacturing.…
Q: Marcy Tucker received the following items this year. Determine to what extent each item is included…
A: In order to determine the adjusted gross income, the adjustments are required to be subtracted from…
Q: Tamarisk Ltd issued a $1,094,000, 10-year bond dated January 1, 2023. The bond was sold to yield 12%…
A: A firm or group may issue bonds payable as a form of long-term debt to raise capital from investors.…
Q: Sandhill Company, a machinery dealer, leased a machine to Dexter Corporation on January 1, 2020. The…
A: The method that businesses employ to record the financial impact of their leases is known as lease…
Q: nalyze the relationship among risk, opportunity and controls: Craig learns that one of the…
A: The situation described involving an employee using company equipment for personal snow plowing jobs…
Q: Donald Transport assembles prestige manufactured homes. Its job costing system has two direct-cost…
A: A journal entry is a form of accounting entry that is used to report a business transaction in a…
Q: Variable and Absorption Costing-Service Company Tech Helpers Company prepares a variable costing…
A: Absorption costing, often known as "full costing," is a management accounting method for recording…
Q: predetermined overhead rate is calculated by dividing actual overhead cost by the actual amount of a…
A: The overhead is applied to the product on the basis of predetermined overhead rate. The…
Q: Sally owns real property for which the annual property taxes are $14,080. She sells the property to…
A: A property tax is an ad valorem tax based on a property's value. The regional government in charge…
Q: a. Depreciation on the company's equipment for the year is computed to be $18,000. b. The Prepaid…
A: The journal entries are prepared to record the transactions on the regular basis. The adjustment…
Q: Estimate the ending inventory using the retail inventory method. (Round intermediate calculations to…
A: Retail inventory method is a method used for estimating value of stores inventory. It calculate…
Q: Balance at January 1, 2019 Sale of preferred shares Sale of common shares, 7/1 Cash dividend,…
A: Earnings per Share - Earnings per share is an income earned by the organization to the shareholders…
Q: On February 15, Jewel Company buys bonds of Marcelo Corporation for $201.410 cash. This debt…
A: Journal entry means the primary reporting of the business transactions in the books of accounts.…
Q: A firm reports subscription fee revenue on the income statement of $200,000. Beginning and ending…
A: The cash flow statement is prepared after the accounting period to know the cash position. It shows…
Q: Below is the Inventory purchases of Carrigan Corrugated Company. Beginning balance January 1st…
A: Lets understand the basics. In First In First Out basis, goods purchased first are sold first. In…
Q: Account Isabela is single and turned 72 years old on October 1, 2022. Isabela worked as a…
A: Answer:- Earned income tax credit:- By lowering the amount of tax payable on a dollar for dollar…
Q: MY Autobody's adjusted trial balance on December 31, 2023, appears in the work sheet as follows: No.…
A: First of all, income statement is prepared to calculate the amount of net income. Then Statement of…
Q: Income taxes expense Net income Assets Cash Accounts receivable Inventory Prepaid expenses. Total…
A: The cash flow statement is prepared to record the cash flow from various activities during the…
Q: How much is iTaft's Output VAT 2. Assuming iTaft sold the parcel of land where the apartment sits…
A: VAT applies to the rendering of services and the sale, barter, and exchange of goods or properties.…
Q: Presented below is the GROSS Pay of each employee at First Choice. EE 1 2 3 4 5 6 7 8 Q1 3500 8900…
A: Employer has to pay the tax to the federal government. The tax rate is 0.6% on the first $7,000…
Q: The Accounting Equation At the beginning of the year, Addison Company's assets are $187,000 and its…
A: ACCOUNTING EQUATION Accounting Equation is a Financial Accounting Technique which represents the…
Q: In anticipation of stocking Mookie The Beagle" Concierge branded inventory. Cy charged $864 for 6…
A: At the time of preparation of journal entries (relation between debit and credit) Debits are always…
Q: On November 15, 2021, Trade Company made payments for the following expenditures:…
A: Asset is defined as any resource that attracts income to its lawful owner. Each asset has varied…
Q: a. What balance does Haynes's Investment in Turner account show on December 31, 2021, when the…
A: Consolidated equipment = Balance of parent + Balance of subsidiary + undervalued amount -…
Q: Eastern Corporation has two producing department and two service departments labeled P1, P2, SI, and…
A: The algebraic method is based on the equation form for allocating the overhead costs of service…
Q: The standard costs and actual costs for factory overhead for the manufacture of 2,900units of actual…
A: Standard cost : Fixed Cost absorbed = 2900 * 3 * $ 0.76 = $ 6,612 Variable cost = 2900 * 3 * $2.02…
Q: The following amortization schedule is for Pronghorn Ltd's investment in Spangler Corp.'s $1…
A: Bonds serve as a means for companies and governments to raise capital for financing projects,…
Q: ABC Company has the following information for the year ended December 31, 2022: Sales revenue:…
A: The amount of money that a business or individual makes after subtracting all costs, taxes, and…
Q: Superior Company provided the following data for the year ended December 31 (all raw materials are…
A: The income statement is prepared to estimate the profitability of the business for the current…
Q: Enter the month-end totals from the Cash Receipts journal. Enter the month-end totals from the Cash…
A: There are four types of general other than general journals i.e., cash receipt journal, cash…
D9.
Account
Trending now
This is a popular solution!
Step by step
Solved in 4 steps
- Calculate lead time Williams Optical Inc. is considering a new lean product cell. The present manufacturing approach produces a product in four separate steps. The production batch sizes are 45 units. The process time for each step is as follows: The time required to move each batch between steps is 5 minutes. In addition, the time to move raw materials to Process Step 1 is also 5 minutes, and the time to move completed units from Process Step 4 to finished goods inventory is 5 minutes. The new lean layout will allow the company to reduce the batch sizes from 45 units to 3 units. The time required to move each batch between steps and the inventory locations will be reduced to 2 minutes. The processing time in each step will stay the same. Determine the value-added, non-value-added, and total lead times, and the value-added ratio under the (A) present and (B) proposed production approaches. (Round percentages to one decimal place.)Eyring Manufacturing produces a component used in its production of washing machines. The time to set up and produce a batch of the components is two days. The average daily usage is 800 components, and the maximum daily usage is 875 components. Required: Compute the reorder point assuming that safety stock is carried by Eyring Manufacturing. How much safety stock is carried by Eyring?Mabbut Company has the following departmental manufacturing layout for one of its plants: A consulting firm recommended a value stream with the following manufacturing cell: Required: 1. Calculate the total time it takes to produce a batch of 10 units using the traditional departmental manufacturing layout. 2. Using cellular manufacturing, how much time is saved producing the same batch of 10 units? Assuming the cell operates continuously, what is the production rate? Which process controls this production rate? 3. Assume the processing time of Welding is reduced to 6 minutes, while the times of the other processes stay the same. What is the production rate now, and how long will it take to produce a batch of 10 units if the cell is in a continuous production mode?
- Use the following information for Exercises 5-44 through 5-46: The following six situations at Diviney Manufacturing Inc. are independent. a. A manual insertion process takes 30 minutes and 8 pounds of material to produce a product. Automating the insertion process requires 15 minutes of machine time and 7.5 pounds of material. The cost per labor hour is 12, the cost per machine hour is 8, and the cost per pound of materials is 10. b. With its original design, a gear requires 8 hours of setup time. By redesigning the gear so that the number of different grooves needed is reduced by 50%, the setup time is reduced by 75%. The cost per setup hour is 50. c. A product currently requires 6 moves. By redesigning the manufacturing layout, the number of moves can be reduced from 6 to 0. The cost per move is 20. d. Inspection time for a plant is 16,000 hours per year. The cost of inspection consists of salaries of 8 inspectors, totaling 320,000. Inspection also uses supplies costing 5 per inspection hour. The company eliminated most defective components by eliminating low-quality suppliers. The number of production errors was reduced dramatically by installing a system of statistical process control. Further quality improvements were realized by redesigning the products, making them easier to manufacture. The net effect was to achieve a close to zero-defect state and eliminate the need for any inspection activity. e. Each unit of a product requires 6 components. The average number of components is 6.5 due to component failure, requiring rework and extra components. Developing relations with the right suppliers and increasing the quality of the purchased component can reduce the average number of components to 6 components per unit. The cost per component is 500. f. A plant produces 100 different electronic products. Each product requires an average of 8 components that are purchased externally. The components are different for each part. By redesigning the products, it is possible to produce the 100 products so that they all have 4 components in common. This will reduce the demand for purchasing, receiving, and paying bills. Estimated savings from the reduced demand are 900,000 per year. 5-46 Type of Activity Management Refer to the information for Diviney Manufacturing on the previous page. Required: For each situation, identify the cost reduction measure: activity elimination, activity reduction, activity sharing, or activity selection.Gumbrecht Company has the following departmental manufacturing layout for one of its plants: A consulting firm has recommended a value stream with the following manufacturing cell: Required: 1. Calculate the total time it takes to produce a batch of 20 units using the traditional departmental manufacturing layout. 2. Using cellular manufacturing, how much time is saved producing the same batch of 20 units? Assuming the cell operates continuously, what is the production rate? Which process controls this production rate? 3. Assume the processing time of Casting is reduced to 9 minutes, while the times of the other processes stay the same. What is the production rate now, and how long will it take to produce a batch of 20 units if the cell is in a continuous production mode?Use the following information for Exercises 5-44 through 5-46: The following six situations at Diviney Manufacturing Inc. are independent. a. A manual insertion process takes 30 minutes and 8 pounds of material to produce a product. Automating the insertion process requires 15 minutes of machine time and 7.5 pounds of material. The cost per labor hour is 12, the cost per machine hour is 8, and the cost per pound of materials is 10. b. With its original design, a gear requires 8 hours of setup time. By redesigning the gear so that the number of different grooves needed is reduced by 50%, the setup time is reduced by 75%. The cost per setup hour is 50. c. A product currently requires 6 moves. By redesigning the manufacturing layout, the number of moves can be reduced from 6 to 0. The cost per move is 20. d. Inspection time for a plant is 16,000 hours per year. The cost of inspection consists of salaries of 8 inspectors, totaling 320,000. Inspection also uses supplies costing 5 per inspection hour. The company eliminated most defective components by eliminating low-quality suppliers. The number of production errors was reduced dramatically by installing a system of statistical process control. Further quality improvements were realized by redesigning the products, making them easier to manufacture. The net effect was to achieve a close to zero-defect state and eliminate the need for any inspection activity. e. Each unit of a product requires 6 components. The average number of components is 6.5 due to component failure, requiring rework and extra components. Developing relations with the right suppliers and increasing the quality of the purchased component can reduce the average number of components to 6 components per unit. The cost per component is 500. f. A plant produces 100 different electronic products. Each product requires an average of 8 components that are purchased externally. The components are different for each part. By redesigning the products, it is possible to produce the 100 products so that they all have 4 components in common. This will reduce the demand for purchasing, receiving, and paying bills. Estimated savings from the reduced demand are 900,000 per year. 5-44 Nonvalue-Added Costs Refer to the information for Diviney Manufacturing on the previous page. Required: Estimate the nonvalue-added cost for each situation.
- Christmas Express makes wreaths in batch sizes of 12. The cutting and assembly process takes 8 minutes per wreath, and the decorating process time is 10 minutes per wreath. It takes 12 minutes to move the wreaths from the cutting and assembly process to the decorating process. a. Compute the value-added, non-value-added, and total lead times of the wreath process. Line Item Description Answer minutes Value-added lead time fill in the blank 1 minutes Non-value-added lead time: Move time fill in the blank 2 Within-batch wait time fill in the blank 3 Total lead time fill in the blank 4 minutes b. Compute the value-added ratio. Round to one decimal place.fill in the blank 1 of 1%Christmas Express makes wreaths in batch sizes of 34. The cutting and assembly process takes 5 minutes per wreath, and the decorating process time is 8 minutes per wreath. It takes 5 minutes to move the wreaths from the cutting and assembly process to the decorating process. a. Compute the value-added, non-value-added, and total lead times of the wreath process. Value-added lead time fill in the blank 1 minutes Non-value-added lead time: Move time fill in the blank 2 Within-batch wait time fill in the blank 3 Total lead time fill in the blank 4 minutes b. Compute the value-added ratio. Round to one decimal place.fill in the blank 5 %Isaacson Dental Inc. is considering a new lean product cell. The present manufacturing approach produces a product in four separate steps. The production batch sizes are 50 units. The process time for each step is as follows: Line Item Description Time Process Step 1 6 minutes Process Step 2 12 minutes Process Step 3 9 minutes Process Step 4 3 minutes The time required to move each batch between steps is 6 minutes. In addition, the time to move raw materials to Process Step 1 is also 6 minutes, and the time to move completed units from Process Step 4 to finished goods inventory is 6 minutes. The new lean layout will allow the company to reduce the batch sizes from 50 units to 2 units. The time required to move each batch between steps and the inventory locations will be reduced to 1 minute. The processing time in each step will stay the same. Determine the value-added, non-value-added, and total lead times, and the value-added ratio under the (a) present and (b)…
- Williams Optical Inc. is considering a new lean product cell. The present manufacturing approachproduces a product in four separate steps. The production batch sizes are 45 units. The processtime for each step is as follows: Process Step 1 5 minutesProcess Step 2 8 minutesProcess Step 3 4 minutesProcess Step 4 3 minutes The time required to move each batch between steps is 5 minutes. In addition, the time tomove raw materials to Process Step 1 is also 5 minutes, and the time to move completed unitsfrom Process Step 4 to finished goods inventory is 5 minutes.The new lean layout will allow the company to reduce the batch sizes from 45 units to 3 units.The time required to move each batch between steps and the inventory locations will be reducedto 2 minutes. The processing time in each step will stay the same.Determine the value-added, non-value-added, and total lead times, and the value-added ratio under the (a) present and (b) proposed production approaches. Round percentages to one…Pockets Inc. manufactures cargo pants in the cutting and sewing process. Cargo pants are manufactured in batches of 30. The cutting time is 4 minutes per unit. The sewing time is 12 minutes per unit. It takes 20 minutes to move a batch of jeans from cutting to sewing. a. Compute the value-added, non-value-added, and total lead time of this process. Line Item Description Lead Time Value-added lead time fill in the blank 1 minutes Non-value-added lead time fill in the blank 2 minutes Total lead time fill in the blank 3 minutes b. Compute the value-added ratio. Round to one decimal place.fill in the blank 1 of 1%Williams Optical Inc. is considering a new lean product cell. The present manufacturing approach produces a product in four separate steps. The production batch sizes are 45 units. The process time for each step is as follows: Process Step 1 5 minutes Process Step 2 8 minutes Process Step 3 4 minutes Process Step 4 3 minutes The time required to move each batch between steps is 5 minutes. In addition, the time to move raw materials to Process Step 1 is also 5 minutes, and the time to move completed units from Process Step 4 to finished goods inventory is 5 minutes. The new lean layout will allow the company to reduce the batch sizes from 45 units to 3 units. The time required to move each batch between steps and the inventory locations will be reduced to 2 minutes. The processing time in each step will stay the same. Determine the value-added, non-value-added, and total lead times, and the value-added ratio under the present and proposed production approaches. If required,…