conduction convection experiment If the material of the fins can be changed to reduce the total thermal resistance, which material is advantageous to use? If you could change the speed or temperature of the air to reduce the total thermal resistance, how would you change it?

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter2: Steady Heat Conduction

Section: Chapter Questions

Problem 2.40P: One end of a 0.3-m-long steel rod is connected to a wall at 204C. The other end is connected to a...

See similar textbooks

Related questions

Q: 1. The thermal boundary layer will be thicker than the velocity boundary layer if Pr>1. 2. For…

A: The thermal boundary layer will be thicker than the velocity boundary layer if Pr>1: False Note:…

Q: mitigated by replacing a window containing a single pane of glass with (a) double-pane low-E…

Q: The operations management of the industrial plant where you work asks you to determine the length of…

Q: Can body at higher temperature have lower heat transfer compared to body at lower temperature and…

A: Given that Can body at higher temperature have lower heat transfer compared to body at lower…

Q: Step 4 X Your answer is incorrect. What is the free convection heat transfer coefficient on the top…

Q: Hot water is flowing through a 3.5 cm (1-1/4") schedule 40 steel pipe at a velocity of 1.8 m/s. The…

A: Given:- v=1.8m/s di=3.5cm Ti=110°C k=0.15W/m°C L=15m To find:- Drop in the temperature of the water…

Q: Hot gas temperature: Cold gas temperature: 1200°C 50°C Convection heat transfer coefficient on the…

A: Given that, Temperature of hot gas, Th=1200 °C,Temperature of cold gas, Tc=50 °C,Convection heat…

Q: Air at 25 ° C blows over the hot steel plate whose surface temperature is maintained at 150 ° C. The…

A: T1=Hot steel plate whose surface temperature=150T∞=Temperature of air=25°Ch=Convective heat transfer…

Q: Steam at a temperature of 723 K is flowing through a pipe with an outer diameter of 100 mm. The pipe…

Q: Water at 10°C is is flowing at 0.8 m/s across a long cylinder that is made of a material that…

Q: 2. Consider a flow of oil at 20oC in a 30 cm diameter pipeline at an average velocity of 2 m/s. A…

A: Given Diameter D = 30 cm = 0.3 m Average velocity V = 2 m/s Length of the pipe L = 100 m Surface…

Q: The author and his then 6-year-old son have conducted the following experiment to determine the…

Q: Identify which of the combined mechanisms applicable to stationary fluid a Conduction & Convection…

A: To Identify the combined mechanism that applies on a stationary fluid.

Q: In thermally fully developed flow of a fluid with constant properties, the local convection…

A: Thermally fully developed flow of fluid is in which temperature profile doesn't change along the…

Q: There is an equipment that allows to measure the heat transfer in fins with at least three different…

A: Given data: Fins of circular cross-section are considered.The fins are made of aluminum with…

Q: As a researcher in the field of heat transfer, how will you distinguish between radiation by black…

A: Hello. Since you have posted multiple questions and not specified which question needs to be solved,…

Q: A glass window of width W = 1 m and height H = 2 m is 5 mm thick and has a thermal conductivity of…

A: Solution:

Q: Water as much as 0.002kg/s at a temperature of 18 °C Flows into a tube with a flow that has been…

Q: ou have experienced convection cooling if you have ever extended your handout of the window of a…

A: given data; temperature at hand (T)=300c(a)⇒vehicle speed…

Q: Consider a sphere and cylinder that have the same volume and radius made of copper. Both of them are…

A: Heat transfer: The rate of heat transfer is directly proportional to the area exposed to the heat…

Q: Either free or forced convection is good by considering an example.

A: Forced convection - When a fan, pump, or suction device is used to facilitate convection, the result…

Q: Using your own words and relevant equations, explain why the rate of heat transfer through…

A: The heat transfer through convection is faster than the rate of heat transfer through convection…

Q: What is(roughness)? what is its effect on heat transfer? Write one or two pages providing schemes or…

Q: Determine the convection heat transfer resistance on the inside of the pipe per unit length, in…

A: R, convection i=1/hi*Ai =(1/450*π*0.150*1). L=1(unit length) =4.716*10^-3 =4.716mK/W

Q: Palm oil with a density of 1200 kg/m3 and the specific heat of 2 kJ/(kg.K) is to be heated from 20oC…

A: Given: Density, ρ- 1200 kg/m3 Specific heat, Cp - 2 kJ/kg.K Diameter, D - 2 m Height, H - 2 m To…

Q: (1) Explain the concept of convection heat transfer. What are the methods used for calculating the…

A: To find :- Concept of convective heat transfer and methods used for calculating the heat transfer…

Q: Consider a sphere and cylinder that have the same volume and radius made of copper. Both of them are…

A: The rate of convection heat transfer is the product of the heat transfer coefficient, area of heat…

Q: while flowing through a smooth pipe with 1.5 cm inner diameter and 7 meters length.The entire…

A: We are suppose to solve only 3 subparts. Please post other parts as a separate question.

Q: A glass window of width W = 1 m and height H = 2 m is 5 mm thick and has a thermal conductivity of…

A: Width of window, W=1m Height of window, H=2m Thickness of window, t=5mm=0.005m Thermal conductivity…

Q: The rear window of an automobile is defogged by passing warm air over its inner surface. If the warm…

Q: To maximize production and minimize pumping costs, crude oil is heated to reduce its viscosity…

Q: If a 20 cm long and 0.4 mm diameter platinum wire is placed horizontally in a water container with a…

Q: Differentiate between free and forced convection with examples.

Q: A hot object suspended by a string is to be cooled by natural convection in fluids whose volume…

A: Solution: The correct answer to the question with the explanation is given below:

Q: Bebang owns a 130-mm-thick concrete brick table top that has an area of 10,000,000 mm? and a…

Q: Define convection and its types. Either free or forced convection is good by considering an example

A: The convection is a mode of heat transfer which occurs by the mass motion of a fluid such as air.…

Q: :Define convection and its types. Either free or forced convection is good by considering an…

A: It is required to define convection and classify it

Q: A can of engine oil with a length of 150 mm and a diameter of 100 mm is placed vertically in the…

A: The data given is, Length of the can of engine oil, L = 150 mm = 0.150 m Diameter of the can of…

Q: A printed circuit board with an area of 0.3x0.2 has a heat loss of 100 w from one side to the other…

A: Let Ts =Surface temperature of circuit board T=Temperature of ambient air =293K h =Heat transfer…

Q: Hot-surface temperature of a 12-mm thick fire brick wall is maintained at 913 K. If the average…

Q: Explain in your own words: (a) In what way is the heat transfer through a large steel plate that has…

A: (a) Consider a large plate that has surface its surface at specific temperature. There must be…

Q: 1. Which is more effective in transferring heat by natural convection or forced convection?

A: In convection mode of heat transfer, heat transfer takes place by moving molecules or atoms of…

Q: Question 1: A glass window of width W = 1 m and height H = 2m is 5 mm thick and has a thermal…

Question

Answer all questions strictly otherwise dont attempt it.

conduction convection experiment
If the material of the fins can be changed to reduce the total thermal resistance, which material is advantageous to use?
If you could change the speed or temperature of the air to reduce the total thermal resistance, how would you change it?
List all the causes that can cause errors in your conclusions, and consider how changes in those causes affect the results.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The heat transfer coefficient for a gas flowing over a thin float plate 3-m long and 0.3-m wide varies with distance from the leading edge according to hc(x)=10x1/4Wm2K If the plate temperature is 170C and the gas temperature is 30C, calculate (a) the average heat transfer coefficient, (b) the rate of heat transfer between the plate and the gas, and (c) the local heat flux 2 m from the leading edge. Problem 1.18
Determine the rate of heat transfer per meter length from a 5-cm-OD pipe at 150C placed eccentrically within a larger cylinder of 85 magnesia wool as shown in the sketch. The outside diameter of the larger cylinder is 15 cm and the surface temperature is 50C.
1.1 On a cold winter day, the outer surface of a 0.2-m-thick concrete wall of a warehouse is exposed to temperature of –5°C, while the inner surface is kept at 20°C. The thermal conductivity of the concrete is 1.2 W/m K. Determine the heat loss through the wall, which is 10-m long and 3-m high. Problem 1.1
One end of a 0.3-m-long steel rod is connected to a wall at 204C. The other end is connected to a wall that is maintained at 93C. Air is blown across the rod so that a heat transfer coefficient of 17W/m2 K is maintained over the entire surface. If the diameter of the rod is 5 cm and the temperature of the air is 38C, what is the net rate of heat loss to the air?
A horizontal, 3-mm-thick flat-copper plate, 1-m long and 0.5-m wide, is exposed in air at 27C to radiation from the sun. If the total rate of solar radiation absorbed is 300 W and the combined radiation and convection heat transfer coefficients on the upper and lower surfaces are 20 and 15W/m2K, respectively, determine the equilibrium temperature of the plate.
1.4 To measure thermal conductivity, two similar 1-cm-thick specimens are placed in the apparatus shown in the accompanying sketch. Electric current is supplied to the guard heater, and a wattmeter shows that the power dissipation is 10 W. Thermocouples attached to the warmer and to the cooler surfaces show temperatures of 322 and 300 K, respectively. Calculate the thermal conductivity of the material at the mean temperature in W/m K. Problem 1.4
Explain in your own words: (a) In what way is the heat transfer through a large steel plate that has its surfaces at specific temperatures? (B) What are the patterns in which the temperature at one surface of the steel plate is not specified, but the surface is exposed to a fluid at a specified temperature?
Question 1:A glass window of width W = 1 m and height H = 2 m is 5 mm thick and has a thermal conductivity of kg=1.4 W/m.K. If the inner and outer surface temperatures of the glass are 15oC and -20oC, respectively, ona cold winter day, what is the rate of heat loss throughthe glass? To reduce heat loss through windows, it iscustomary to use a double pane construction in whichadjoining panes are separated by an air space. If thespacing is 10 mm and the glass surfaces in contact withthe air have temperatures of (last two digit of your Registration number) oC and -15oC, what isthe rate of heat loss from a 1 m x 2 m window? Thethermal conductivity of air is ka=0.024 W/m.K.
Experiment No. (5) Heat Transfer, Power Input and Surface temperature Questions and Discussions 1. What is the difference between natural and forced convection heat transfer? 2. What sources of error are there in this experiment? 3. Mention the parameters you utilized during the calculation and discuss them briefly. 4. In what functions does Nusselt number in natural convection differ from forced convection, Discuss. 5. Give two examples of natural convection heat transfer. 6. In natural convetion, what makes the hot part of fluid to move?
Question 1: A glass window of width W = 1 m and height H = 2 m is 5 mm thick and has a thermal conductivity of kg =1.4 W/m.K. If the inner and outer surface temperatures of the glass are 15 oC and -20 oC, respectively, on a cold winter day, what is the rate of heat loss through the glass? To reduce heat loss through windows, it is customary to use a double pane construction in which adjoining panes are separated by an air space. If the spacing is 10 mm and the glass surfaces in contact with the air have temperatures of 20 oC and -15 oC, what is the rate of heat loss from a 1 m x 2 m window? The thermal conductivity of air is ka = 0.024 W/m.K.
Fast. A rod of 1 cm diameter and 10 cm long is heated at one end. A fan is used to blow air over the surface of the rod to help cool it. What is the appropriate area to use for the conduction along the rod? Please answer in cm^2
Calculate the over-all coefficient of heat transfer U for a piece of glass1/8-in thick, exposed to still air at 70 °F on one side and 0 °F air moving at15 mph on the other side.