Consider a client and a server connected through one router. Assume the router can start transmitting an incoming packet after receiving its first 0.6 Mbits instead of the whole packet. Suppose that the transmission rate of each link is 6 Mb/s and that the client transmits one packet with a size of 2 Mbits to the server. Assume the propagation, processing, and queuing delays are negligible. Answer the following questions (use up to 4 significant digits if needed; e.g., yy.xxxx): What is the end-to-end delay?=D| seconds What is the end-to-end delay if there are 2 routers between the client and the server?= seconds

Consider a client and a server connected through one router. Assume the router can start transmitting an incoming packet after receiving its first 0.6 Mbits instead of the whole packet. Suppose that the transmission rate of each link is 6 Mb/s and that the client transmits one packet with a size of 2 Mbits to the server. Assume the propagation, processing, and queuing delays are negligible. Answer the following questions (use up to 4 significant digits if needed; e.g., yy.xxxx): What is the end-to-end delay?=D| seconds What is the end-to-end delay if there are 2 routers between the client and the server?= seconds

Operations Research : Applications and Algorithms

4th Edition

ISBN:9780534380588

Author:Wayne L. Winston

Publisher:Wayne L. Winston

Chapter20: Queuing Theory

Section20.4: The M/m/1/gd/∞/∞ Queuing System And The Queuing Formula L = Λw

Problem 7P

See similar textbooks

Similar questions

Consider a short, 10-meter link, over which a sender can transmit at a rate of 150 bits/sec in both directions. Suppose that packets containing data are 100,000 bits long, and packets containing only control (e.g., ACK or handshaking) are 200 bits long. Assume that N parallel connections each get 1/N of the link bandwidth. Now consider the HTTP protocol, and suppose that each downloaded object is 100 Kbits long, and that the initial downloaded object contains 10 referenced objects from the same sender. Would parallel downloads via parallel instances of non-persistent HTTP make sense in this case? Now consider persistent HTTP. Do you expect significant gains over the non-persistent case? Justify and explain your answer
Consider a packet of length L which begins at end system A and travels over three links to a destination end system. These three links are connected by two packet switches. Let di, si, and Ri denote the length, propagation speed, and the transmission rate of link i, for i = 1, 2, 3. The packet switch delays each packet by dproc. Assuming no queuing delays, in terms of di, si, Ri, (i = 1,2,3), and L, what is the total end-to-end delay for the packet? Suppose now the packet is 1,500 bytes, the propagation speed on all three links is 2.5*108 m/s, the transmission rates of all three links are 2 Mbps, the packet switch processing delay is 3 msec, the length of the first link is 5,000 km, the length of the second link is 4,000 km, and the length of the last link is 3,000 km. For these values, what is the end-to-end delay?
Consider a packet of length L that begins at end system A and travels over three links to a destination end system. These three links are connected by two packet switches. Let di, si, and Ri denote the length, propagation speed, and the transmission rate of link i, for i=1,2,3. The packet switch delays each packet by dproc. Assuming no queuing delays, in terms of di, si, Ri, (i=1,2,3), and L, what is the total end-to-end delay for the packet? Suppose now the packet is 1,200 bytes, the propagation speed on all three links is 2.5x10^8 m/s, the transmission rates of all three links are 2 Mbps, the packet switch processing delay is 3 msec, the length of the first link is 4,000 km, the length of the second link is 3,000 km, and the length of the last link is 1,500 km. For these values, what is the end-to-end delay? In the above problem, suppose R1=R2=R3=R and dproc=0. Further suppose the packet switch does not store-and-forward packets but instead immediately transmits each bit it receives…
Can someone help me with this question please? ASAP??!!! 6. Consider a packet of length L which begins at end system A and travels over three links to a destination end system. These three links are connected by two packet switches. Let di, si, and Ri denote the length, propagation speed, and the transmission rate of link i, for i = 1, 2, 3. The packet switch delays each packet by dproc. a. Assuming no queuing delays, in terms of di, si, Ri, (i = 1,2,3), and L, what is the total end-to-end delay for the packet? (10 Points) b. Suppose now the packet is 1,500 bytes, the propagation speed on all three links is 2.5×108 m/s, the transmission rates of all three links are 2 Mbps, the packet switch processing delay is 3 msec, the length of the first link is 5,000 km, the length of the second link is 4,000 km, and the length of the last link is 1,000 km. For these values, what is the end-to-end delay? (15 Points)
A packet switch receives a packet and determines the outbound link to which the packet should be forwarded. When the packet arrives, one other packet is halfway done being transmitted on this outbound link and four other packets are waiting to be transmitted. Packets are transmitted in order of arrival. Suppose all packets are 1,200 bytes and the link rate is 2 Mbps. What is the queuing delay for the packet? More generally, what is the queuing delay when all packets have length L, the transmission rate is R, x bits of the currently-being-transmitted packet have been transmitted, and n packets are already in the queue?
2. Question; Consider two hosts, A and B, connected by a single link of rate R bps. Suppose that the two hosts are separated by m meters, and suppose the propagation speed along the link is s meters/sec. Host A is to send a packet of size L bits to Host B. Express the propagation delay, ????? , in terms of m and s. Determine the transmission time of the packet, ?????? , in terms of L and R. Ignoring processing and queuing delays, obtain an expression for the end-to-end delay. Suppose , ? = 2?10^8 ?/?, ? = 5 ????? and ? = 100???? Find the distance m so that ????? equals ??????.
Consider a network with 4 links between two hosts where the maximum allowable packet size is 1000 bits; each link has a transmission rate of 2000 bits per second, except the second link has a transmission rate of 1000 bits per second. How long does it take to send 6000 bits from one host to the other? You may ignore propogation delay, assume there is no other traffic on the network, and assume that no routers drop packets due to queue length. Round your answer to two decimal places.
Consider two hosts, A and B, connected by a single link of rate R bps. Suppose that the two hostsare separated by m meters, and suppose the propagation speed along the link is s meters/sec.Host A is to send a packet of size L bits to host B.a. Express the propagation delay, dprop, in terms of m and s.b. Determine the transmission time of the packet, dtrans, in terms of L and R.c. Ignoring processing and queuing delays, obtain an expression for the end-to-end delay.d. Suppose host A begins to transmit the packet at time t= 0, at time t =dtrans, where is the lastbit of the packet?e. Suppose dprop is greater than dtrans. At time t =dtrans, where is the first bit of the packet?
Consider a computer 1 that communicates with a computer 2 via LAN1, router R1, and LAN2. The sending computer1 is running two processes at this time with port addresses k and l. The receiving computer 2 is running three processes at this time with port addresses f, g and h. Process k in the sending computer 1 needs to communicate with process g in the receiving computer 2. Draw the network and show the contents of segments, packets and frames at the network, data link, and transport layer for each hop. Note: Computer 1 has: Physical address=15, Logical address=A Router R1 has: Physical address in the side of LAN 1=20, Logical address in the side of LAN1=B Physical address in the side of LAN 2=50, Logical address in the side of LAN2=D. Computer 2 has: Physical address=77, Logical address=E.
Consider a packet of length L that begins at end system A and travels over three links to a destination end system. These three links are connected by two packet switches. Let d, s , and R denote the length, propagation speed, and the transmission rate of link i, for i=1,2,3 . The packet switch delays each packet by d . Assuming no queuing delays, in terms of d, s , R, , and L, what is the total end-to-end delay for the packet? Suppose now the packet is 1,500 bytes, the propagation speed on all three links is 2.5⋅108m/s the transmission rates of all three links are 2 Mbps, the packet switch processing delay is 3 msec, the length of the first link is 5,000 km, the length of the second link is 4,000 km, and the length of the last link is 1,000 km. For these values, what is the end-to-end delay?
2. Now suppose there are two links between source and destination, with one router connecting the two links. Each link is 5,000 km long. Again suppose the MP3 file is sent as one packet. Suppose there is no congestion, so that the packet is transmitted onto the second link as soon as the router receives the entire packet. What is the end-to-end delay?
This elementary problem begins to explore propagation delay andtransmission delay, two central concepts in data networking. Consider two hosts, Aand B, connected by a single link of rate R bps. Suppose that the two hosts areseparated by m meters, and suppose the propagation speed along the link is smeters/sec. Host A is to send a packet of size L bits to Host B. d. Suppose Host A begins to transmit the packet at time t=0 . At time t= ?????? ,where is the last bit of the packet? e. Suppose ????? is greater than ?????? . At time t= ??????, where is the first bit of the packet?f. Suppose ????? is less than ??????. At time t= ?????? , where is the first bit of thepacket?