Consider a piston-cylinder device with a set of stops which contains 6 kg of saturated liquid- vapor mixture of water at 160 kPa. Initially, one third of the water is in the liquid phase and the rest is in the vapor phase. The device is now heated, and the piston, which is resting on a set of stops, starts moving when the pressure inside the piston-cylinder chamber reaches 600 kPa. The heating process continues until the total volume increases by 20 percent. Analyze the system: (a) the initial and final temperatures, (b) the mass of liquid water when the piston first starts moving (c) the work done during this process. (d) show the process on a P-v diagram H,0 m=6kg Figure 1. A piston-cylinder device with stoppers

Consider a piston-cylinder device with a set of stops which contains 6 kg of saturated liquid- vapor mixture of water at 160 kPa. Initially, one third of the water is in the liquid phase and the rest is in the vapor phase. The device is now heated, and the piston, which is resting on a set of stops, starts moving when the pressure inside the piston-cylinder chamber reaches 600 kPa. The heating process continues until the total volume increases by 20 percent. Analyze the system: (a) the initial and final temperatures, (b) the mass of liquid water when the piston first starts moving (c) the work done during this process. (d) show the process on a P-v diagram H,0 m=6kg Figure 1. A piston-cylinder device with stoppers

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Steam is contained in a 4-L volume at a pressure of 1.5 MPa and a temperature of 400 C. If the pressure is held constant by expanding the volume while 20 kJ of heat is added, the final temperature is nearest
A 4-L pressure cooker has an operating pressure of 175 kPa. Initially, one-half of the volume is filled with liquid water and the other half by water vapor. The cooker is now placed on top of a 750-W electrical heating unit that is kept on for 20 min. Assuming the surroundings to be at 25°C and 100 kPa, determine the amount of water that remained in the cooker.
Q9/ A piston-cylinder device contains 0.85 kg of refrigerant- 134a at 10°C. The piston that is free to move has a mass of 12 kg and a diameter of 25 cm. The local atmospheric pressure is 88 kPa. Now, heat is transferred to refrigerant-134a until the temperature is 15°C. Determine (a) the final pressure, (b) the change in the volume of the cylinder, and (e) the change in the enthalpy of the refrigerant-134a.
A liquid R-134a bottle has an internal volume of 0.0015 m3 . Initially it contains 0.55 kg of R-134a (saturated mixture) at 26°C. A valve is opened and R-134a vapor only (no liquid) is allowed to escape slowly such that temperature remains constant until the mass of R-134a remaining is 0.15 kg. Find the heat transfer with the surroundings that is needed to maintain the temperature and pressure of the R-134a constant.
A room is filled with saturated steam at 100°C with enthalpy of 2675.6 kJ/kg. Now a 5-kg bowling ball at 25°C is brought to the room. Heat is transferred to the ball from the steam, and the temperature of the ball rises to 100°C while some steam condenses on the ball as it loses heat (but it still remains at 100°C). The specific heat of the ball can be taken to be 1.8 kJ/kg · C. The approximate mass of steam that condensed during this process is? what is the answer? a. 80 g b. 252 g c. 351 g d. 128 g
A room is filled with saturated steam at 100°C with enthalpy of 2675.6 kJ/kg. Now a 5-kg bowling ball at 25°C is brought to the room. Heat is transferred to the ball from the steam, and the temperature of the ball rises to 100°C while some steam condenses on the ball as it loses heat (but it still remains at 100°C). The specific heat of the ball can be taken to be 1.8 kJ/kg · C. The approximate mass of steam that condensed during this process is
Refrigerant-134a at 320 kPa and 40°C undergoes an isothermal process in a closed system until its quality is 45 percent. On a per-unit-mass basis, determine how much work and heat transfer are required.
A spring-loaded piston-cylinder device is initially filled with 0.13 lbm of an R-134a liquid-vapor mixture whose temperature is -30 degree Fahrenheit and whose quality is 80 percent. The spring constant in the spring force relation F 5 kx is 37 lbf/in, and the piston diameter is 12 in. The R-134a undergoes a process that increases its volume by 50 percent. Calculate the final temperature and enthalpy of the R-134a.
Determine the quality of steam at 169.06 kPa when 270 kJ/kg of energy are lost from saturated steam. What is the steam temperature?
An ideal gas is compressed isothermally from 100 kPa to 170 kPa. The percent increase in the density of this gas during this process is (a) 70% (b) 35% (c) 17% (d) 59% (e) 170%
A liquid R-134a bottle has an internal volume of 0.0018 m^3 initially, it contains 0.88 kg of R-134a (saturated mixture) at 800 kPa. A valve is opened, and R-134a vapor only (no liquid) is allowed to escape slowly such that temperature remains constant until the mass of R-134a remaining is 0.18 kg. Find the heat transfer necessary with the surroundings to maintain the temperature and pressure of the R-134a constant.
Argon is compressed in a polytropic process with n = 1.2 from 120 kPa and 30°C to 1200 kPa in a piston– cylinder device. Determine the final temperature of the argon.