Answered: Consider a plane of area 30 m^2 in a…

Consider a plane of area 30 m^2 in a bar. The bar is subjected to tensile force of 5 kN. Calculate the shear stress and normal stress on the plane. Take inclination is 30°.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.3.9P: A cylinder filled with oil is under pressure from a piston, as shown in the figure. The diameter d...

See similar textbooks

Related questions

Q: A 12 mm thick steel tire has a width of 110 mm has an internal diameter of 800 mm. Tire is heated…

A: Answer: (a) The tensile stress in the tire is 125 MPa. (b) The compressive pressure between the tire…

Q: A steel cylinder of 1 metre diameter is carrying a fluid under a pressure of 10 N/mm2. Calculate the…

A: Note: Since you have asked multiple question, we will solve the first question for you. If you want…

Q: Consider tow circular rods with a 50mm diameter are joined by a knuckle joint by a pin of 40mm in…

A: Given: Diameter of the rod D=50mm Diameter of the pin Dp=40mm Tensile force F=120kN

Q: A plastic bar of 88 mm is to be twisted by torques T until the angle of rotation between the ends of…

Q: For the figure below, Determine the following: 10 MPa 40 MPа 50 МPа The oavg is equal to in MPa: The…

Q: A scuba tank is being designed for an internal pressure of 1600 psi with a factor of safety of 2.0…

Q: A cylinder head of a steam engine is held on by 14 bolts. The effective diameter of the cylinder is…

Q: A solid round bar of diameter 250mm has a tensile force of 0.2kN acting on it. What is the stress…

Q: Find stress of a aluminum cylinder of diameter 12.8mm and gauge length 50.8mm. The force applied is…

Q: A thin walled spherical shell is subjected to an internal pressure. If the radius of the shell is…

Q: Question 5 A cylinder filled with oil is under pressure from a piston, as shown in figure 5. The…

A: Given data: d=48 mmF=16 kNτmax=42 MPa Need to determine the minimum permissible thickness of the…

Q: Two carbon steel balls, each 30 mm in diameter, are pressed together by a force F. In terms of the…

Q: A wooden bar is subjected to a tensile stress of 5 MPa. What will be the values of normal and shear…

A: Given data: The tensile stress in wooden bar is σ = 5 MPa. The angle between the section and the…

Q: Estimate the normal stress (on) and shear stress (t) on the inclined plane as shown in the below…

Q: If the shear stress in a material is 20 MPa and the corresponding shear strain is 0.0005, calculate…

Q: The principal stresses at a point in a critic section of a machine component are o, = 60 MF %3D = 5…

A: Given:σ1=60 MPa,σ2=5 MPa,σ3=-40 MPa,σy=200 MPa

Q: Problem Solving: Show your Solution 1. A sculpture weighing 10,000 N rests on a horizontal surface…

A: 1) Weight of sculpture =10000 N h=6 m A=0.20 m2 density =2700 kg/m3 length of segment =3 m

Q: The wall thickness of a 1.2 m diameter spherical tank is 1.6875 mm. Calculate the allowable internal…

Q: A body is subjected to a direct tensile stress of 300 MPa in one plane accompanied by a simple shear…

A: given data tensile stress = 300 MPa simple shear = 200 MPa to determine maximum shear stress

Q: A shaft 30 mm diameter is transmitting power at a maximum shear stress of 80 MPa. If a pulley is…

Q: For the punching operation shown in the figure, compute the shear stress (in GPa) in the material if…

A: GivenP=5500kNt=1.5mm=0.0015md=15mm=0.015mL=20mm=0.020m

Q: Calculate the tensile stress (in Mpa) in a suspension bridge supporting cable, of diameter of 50 mm,…

A: Givend=50mmP=4kN

Q: Pressure vessel made of alloy steel with Yield Strength of 250 MPa, Pressure acting on Pressure…

Q: A rubber block with dimensions 120x120x120 mm is a rigid mold It is compressed with a vertical force…

A: Given data: The dimensions of the rubber block are 120 mm×120 mm×120 mm. The vertical force acting…

Q: A rubber block with dimensions 120x120x120 mm is a rigid mold It is compressed with a vertical force…

Q: A 6 mm thick plate is to be punched of a shape shown in figure. Determine the minimum punching force…

Q: 60 MPa 30 MPa 45 MPa

A: On the given element, Stress in x direction = σx = 45 MPa Stress in y direction = σy = -60 MPa…

Q: A steel boiler 2.5 m in diameter has a wall thickness of 25 mm. The internal pressure is 1.6 MPa.…

A: Given: d=2.5 m t=25 mm P=1.6 MPa S=250 MPa

Q: 2. A shaft 30 mm diameter is transmitting power at a maximum shear stress of 80 MPa. If a pulley is…

A: Given data:

Q: A circle of 250 mm diameter is scribed on a steel plate. The plate is subjected to a tensile stress…

Q: A 1.25 inch diameter hole is drilled on the centerline of a steel bar 3.5 inches wide by 3/8 inches…

Q: A rectangular block of material is subjected to a tensile stress of 90 N/mm2 along X axis and a…

A: Given data: - The tensile stress on the block is σx = 90 N/mm2. The compressive stress on the block…

Q: The wall thickness of a spherical thank is 8mm, calculate the diameter if allowable stress is 140MPa…

Q: A circular rod is stretched by a force of 3kN. Solve the diameter of the rod if the stress is not to…

A: Force on rod,P=3KN=3×103NMaximum stress,σ=153MPa=153×106PaLet the diametre of rod=d

Q: stanchion and carries a vertical load of 50 kN. Assuming that the total shearing stress in a bolt is…

A: GIVEN:

Q: The diameter of a piston of the steam engine is 300 mm and the maximum steam pressure is 0.7 N/mm2.…

A: Given:Diameter of piston,DPISTON=300mmPSTEAM=0.7Nmm2Compressive stress,σ=40Nmm2Net force by piston…

Q: A steel punch having diameter 10 mm is used to make hole in a 2.5cm thick steel plate. What will be…

Q: Example 136.A cylindrical pressure vessel is fabricated from steel plating that has a thickness of…

Q: A bronze tire (thickness=12mm, width= 110 mm, internal diameter=800 mm) was heated and shrunk onto…

Q: A double riveted lap joint is made between 15mm thick plates. The rivet diameter and pitch are 25 mm…

Q: A steel bar having 65mm*65mm*3000mm dimension is subjected to an axial force of 128 kN. Taking…

Q: Q. An air vessel, which is made of steel in 2m long. It has an external diameter 40 cm and is 2cm…

Q: A punch for making holes in steel plates assumes that having a diameter of 0.75 in. is used to punch…

Q: Calculate the principle stresses and the maximum shear stress.

A: Given: σx =10 Psi T σy = 25 Psi T τ = 5 Psi

Q: 1. A shaft 80 mm diameter transmits power at maximum shear stress of 63 MPa. Find the length of a 20…

A: as per guideline i have to solve only first question

Concept explainers

Pressure Vessels

The term pressure vessel refers to a closed container that contains gas or liquid at a different pressure than environment pressure. The pressure vessels have a wide scale of applications in our day-to-day lives and other industrial places. Some common examples of pressure vessels are gas cylinders, autoclaves, compressor vessels, etc.

Question

Consider a plane of area 30 m^2 in a bar. The bar is subjected to tensile force of 5 kN. Calculate the shear stress and normal stress on the plane. Take inclination is 30°.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A brass plate with a modulus of elastici ty E = 16 X 106 psi and Poisson’s ratio a = 0.34 is loaded in biaxial stress by normal stresses r and cry. (sec figure). A strain gage is bonded to the plate at an angle 4 = 350 If the stress o is 10,700 psi and the strain means used by the gageise = 390 X 106.whatisthcmax- imum in-plane shear stress (Tr, ),. and shear strain (>‘ ).? What is the maximum shear strain (y ) in the x-: plane? What is the maximum shear strain (y ).. in the y-r plane?
The stresses on an element are sx= 1000 Psi. sy= 500 psi, and txy= 350 psi. Find the stresses acting on an element oriented at an angle 0 = 250. Show these stresses on the rotated element.
(a) Solve part (a) of the preceding problem if the pressure is 8.5 psi, the diameter is 10 in., the wall thickness is 0,05 in., the modulus of elasticity is 200 psi, and Poisson's ratio is 0.48. (b) If the strain must be limited to 1.01, find the maximum acceptable inflation pressure
A cylinder filled with oil is under pressure from a piston, as shown in the figure. The diameter d of the piston is 1,80 in. and the compressive force F is 3500 lb. The maximum allowable shear stress t^^, in the wall of the cylinder is 5500 psi. What is the minimum permissible thickness t„± of the cylinder wall? (Sec figure
A wire with a Young’s Modulus, E, of 8.5 x 106 N/m2 and an original length of 1.5 m is under tension. If the wire length extension is 2.5 mm, calculate the stress in the wire. Give your answer in N/m2to 2 decimal places. (show all work)
A punch for making holes in steel plates assumes that having a diameter of 0.75 in. is used to punch a hole in a 1/4 in. plate. If a force P=20,000 lb is required, what is the average shear stress in the plate and the average compressive stress in the punch?
A wood stave pipe, 120 cm in inside diameter, is to resist a maximum water pressure of 1,200 kPa. If the staves are bound by steel flat bands (10 cm by 2.50 cm), find the spacing of the bands if its allowable stress is 105 MPa.\ Please explain the steps and formulas used.
Calculate the diameter of a pressure vessel of thickness 0.04 m and the inside pressure is 20 mpa. Assume the permissible stress of the vessel is 100 mpa.
If the shear stress in a material is 20 MPa and the corresponding shear strain is 0.0005, calculate the shear modulus of the material.
A wire with a Young’s Modulus, E, of 8.5 x 106 N/m2 and an original length of 1.5 mis under tension. If the wire length extension is 2.5 mm, calculate the stress in thewire. Give your answer in N/m2to 2 decimal places.
The wall thickness of a 1.2 m diameter spherical tank is 1.6875 mm. Calculate the allowable internal pressure if the stress is limited to 55 MPa. If i will get the same answer again I will report and downvote.
The global stresses in a three-ply laminate are given at the top and bottom surface of each ply in the tables below. Assume that each ply is 0.005 in. thick and the laminate has a top cross section of 4 in. × 4 in. What is the resultant force component Nx for the laminate in lb/in? What is the resultant force component Ny for the laminate in lb/in? What is the resultant force component Nxy for the laminate in lb/in?