Consider the flow of oil with p = 870.15 kg/m³ and µ = 3.93 kg/m•s in %3D a 37.6 cm-diameter pipeline at an average velocity of 0.65 m/s. A 302 m- long section of the pipeline passes through the icy waters of a lake. Disregarding the entrance effects, determine the required pumping power in kW. Round your answer to 2 decimal places.

Consider the flow of oil with p = 870.15 kg/m³ and µ = 3.93 kg/m•s in %3D a 37.6 cm-diameter pipeline at an average velocity of 0.65 m/s. A 302 m- long section of the pipeline passes through the icy waters of a lake. Disregarding the entrance effects, determine the required pumping power in kW. Round your answer to 2 decimal places.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water flows in a 15-cm-diameter pipe at a velocity of 1.8 m/s. If the head loss along the pipe is estimated to be 16 m, the required pumping power to overcome this head loss is
Air is flowing through a venture-meter whose diameter is 2.6 in at the entrance part (location 1) and 1.8 in at the throat (location 2). The gage pressure is measured to be 12.2 psia at the entrance and 11.8 psia at the throat. Neglecting frictional effects, show that the volume flow rate can be expressed as and determine the flow rate of air. Take the air density to be 0.075 lbm/ft3.
The air velocity in the duct of a heating system is to be measured by a Pitot-static probe inserted into the duct parallel to the flow. If the differential height between the water columns connected to the two outlets of the probe is 3.2 cm, determine (a) the flow velocity and (b) the pressure rise at the tip of the probe. The air temperature and pressure in the duct are 45° C and 98 kPa, respectively
The velocity profile in fully developed laminar flow in a circular pipe of inner radius R = 2 cm, in m/s, is given by u(r) = 4(1 − r2/R2). Determine the average and maximum velocities in the pipe and the volume flow rate.
Water flows in a 15-cm-diameter pipe at a velocity of 1.8 m/s. If the head loss along the pipe is estimated to be 19 m, the required pumping power (in kW) to overcome this head loss is ?"
Oil with ? = 876 kg/m3 and ? = 0.24 kg/m·s is flowing through a 1.5-cm-diameter pipe that discharges into the atmosphere at 88 kPa. The absolute pressure 15 m before the exit is measured to be 135 kPa. Determine the flow rate of oil through the pipe if the pipe is (a) horizontal, (b) inclined 8° upward from the horizontal, and (c) inclined 8° downward from the horizontal.
The velocity profile in fully developed laminar flow in a circular pipe of inner radius R = 4 cm, in m/s, is given by u(r) = 4(1 - r2/R2). Determine the average and maximum velocities in the pipe and the volume flow rate.
Water flows in a 15-cm-diameter pipe at a velocity of 1.8 m/s. If the head loss along the pipe is estimated to be 16 m, the required pumping power to overcome this head loss is (a) 3.22 kW (b) 3.77 kW (c) 4.45 kW (d) 4.99 kW (e) 5.54 kW
A 6-cm-diameter horizontal water pipe expands gradually to a 9-cm-diameter pipe. The walls of the expansion section are angled 10° from the axis. The average velocity and pressure of water before the expansion section are 7 m/s and 150 kPa, respectively. Determine the head loss in the expansion section and the pressure in the larger-diameter pipe.
Determine (a) the head loss, (b) the pressure drop, and (c) the pumping power for water flowing steadily at 40°F (ρ=62.42 lbm/ft3 and μ=1.038x10-3 lbm/ft-s) through a 0.15-in diameter, 45-ft-long horizontal pipe at an average velocity of 2.5 ft/s. Round off your answers to three (3) decimal places.
A fluid flows at 455 cubic meters per minute inside a rectangular duct, whose cross-section has a length of 150 cm and width of 85 cm. Determine the average velocity of the flow in m/s.
The impeller of a centrifugal blower has a radius of 15 cm and a blade width of 6.1 cm at the inlet, and a radius of 30 cm and a blade width of 3.4 cm at the outlet. The blower delivers atmospheric air at 20°C and 95 kPa. Disre- garding any losses and assuming the tangential components of air velocity at the inlet and the outlet to be equal to the impeller velocity at respective locations, determine the volu- metric flow rate of air when the rotational speed of the shaft is 800 rpm and the power consumption of the blower is 120 W. Also determine the normal components of velocity at the inlet and outlet of the impeller.