Consider the modified scotch yoke mechanism shown in the figure, the crank link OA rotates clockwise at a constant angular speed of 200 rpm starting at an angle of 30°. Work out the dimensions in meters. Use the equivalent kinematic diagram for the kinematic analysis of the mechanism. o = 200 rpm r = 300 mm B = 15

Consider the modified scotch yoke mechanism shown in the figure, the crank link OA rotates clockwise at a constant angular speed of 200 rpm starting at an angle of 30°. Work out the dimensions in meters. Use the equivalent kinematic diagram for the kinematic analysis of the mechanism. o = 200 rpm r = 300 mm B = 15

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter7: Analysis Of Stress And Strain

Section: Chapter Questions

Problem 7.7.14P: Solve the preceding problem for the following data: x=1120106,y=430106,xy=780106,and=45.

See similar textbooks

Similar questions

The inversion of the slider-crank mechanism shown in the figure is driven by link 2 at an angular speed and acceleration of 60 rad/s ccw and 240 rad/s2 cw, respectively. Find the velocity and acceleration of point B.|AO2|=75 mm, |BA|=400 mm, |O4O2|= 125 mm. (Using Complex Algebraic approach do the Position Analysis; Velocity Analysis and Acceleration Analysis then solve the problem please)
An airplane turbofan compressor blade is 3.0 m long and is rotating at 12350 rpm. Calculate the following: Angular and linear displacement after 3.3 seconds.
Find the velocity of A, B, C, and slider D in meters per second for the given configuration (shown in figure 1), if link OA rotates at 1,00 RPM in clockwise direction. Dimensions as follows: OA = 150 mm; OQ = 225 mm; QB = 200 mm; AB = 250 mm; AC = 450 mm; CD = 325 mm. Use a velocity scale diagram of 100 mm.
The system of pulleys and weights shown in the figure is in the field of gravity. Write the Lagrangian equation of type I of the system. Calculate the acceleration of each bead.
As in the figure, in an amusement vehicle rotating in the amusement park, the center shaft rotates at a speed of n=7 rpm. Meanwhile, the child is moved with the position equations r = (2 sinθ + 5) m and z = (3 cosθ) m. Find the forces generated in the child in all three axes (r, θ, z). The weight of the child is m = 34 kg. At the time the photo was taken, θ=123 degrees.
mt 8-A) For the adjacent figure: a) Develop the exact and linearized equation of motion by either Newtons Method or Lagrange
The crank rod (OB) in the crank-piston mechanism shown in the figure is rotating with CONSTANT n rpm (revolutions per minute) in CCW (counter clockwise). The length of the rods are r and L. The length of the piston is 10 cm. Find the components of the tangential (not angular) velocity and tangential (not angular) acceleration vectors (Vx, ax, Vy, ay) of the MIDPOINT (not anyone of the ENDPOINTS) the piston rod (BA) at the given instant by the angle teta. n=324 rpm r=18.7 cm L=46.75 cm teta=85
Solve the preceding problem for the following data: x=1120106,y=430106,xy=780106,and=45.
The figure shows a variation of the Scotch-yoke mechanism. It is driven by crank 2 at an angular velocity and acceleration of 36 rad/s ccw and 120 rad/s2 ccw, respectively. Find the velocity and acceleration of the crosshead, link 4.|AO2|=75 mm. (Using Complex Algebraic approach do the Position Analysis; Velocity Analysis and Acceleration Analysis then solve the problem please)
In the kinematic diagram, the limb dimensions are given below, in the arm slide mechanism, the actuating limb angular position is (theta)θ12 = 600 and the speed of the mechanism is given as (thetadot)θ'12 = 50 rad / s . Do the following operations respectively. Find S'13, (thetawithdot)θ'14 by analyzing velocity.
It moves 4 horizontally and 6 vertically. θ2 (⁰) = 20⁰ ω2 = 75 rad/s (+)Find the speed of limbs 4 and 6 in the mechanism in the figure. Find the acceleration of the same limbs at the same position. (take the angular velocity constant)
In the kinematic diagram, the limb dimensions are given below, in the arm slide mechanism, the actuating limb angular position is (theta)θ12 = 600 and the speed of the mechanism is given as (thetadot)θ'12 = 50 rad / s . Do the following operations respectively. Write the Vector Closure Equation into scalar form.