Answer d and e 1. A cam must rise in 3 seconds at constant velocity of 0.25 in/sec in the first segment. Thenthe follower must return to the zero position in 5 seconds with a full return cycloidalmotion and then dwell for 3 seconds in segment 3. The final segment will be a full risecycloidal motion. The total cycle time is 12 seconds, and the maximum height is in thefirst segment.Full return cycloidal motion1y = L+sin2πFull rise cycloidal motiony = LsinDetermine the following:The cam angular velocity.b. The cam rotation segment widths, B1c. The lift (height) of the constant velocity segment.а.B4 , in degrees. Round off to nearest degree.d. The height at 0 = 180°е.The peak cam linear velocity V(t)peak with zero angular acceleration in segment 4.

Answered: Image /qna-images/answer/1aa2af5e-c1c2-48bc-8ebb-231fea599055.jpg

а. The cam angular velocity. b. The cam rotation segment widths, ß1 c. The lift (height) of the constant velocity segment. d. The height at 0 = 180° e. The peak cam linear velocity V(t)peak With zero angular acceleration in segment 4. B4 , in degrees. Round off to nearest degree. ...... %3D

а. The cam angular velocity. b. The cam rotation segment widths, ß1 c. The lift (height) of the constant velocity segment. d. The height at 0 = 180° e. The peak cam linear velocity V(t)peak With zero angular acceleration in segment 4. B4 , in degrees. Round off to nearest degree. ...... %3D

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

(Q1) flat faced reciprocating follower has the following motion:a) The follower moves out for 80° of cam rotation with uniformacceleration and retardation, the acceleration being twice theretardation.b) The follower dwells for the next 80° of cam rotation.c) It moves in for the next 120° of cam rotation with uniformacceleration and retardation, the retardation being twice theacceleration.d) The follower dwells for the remaining period.The base circle diameter of the cam is 60 mm and the stroke of thefollower is 20 mm. The line of movement of the follower passes throughthe cam centre.Draw the displacement diagram and the profile of the cam very neatlyshowing all constructional details.
A radial disc cam operates a follower in a straight line. The stroke of the follower is 30 mm and is completed in 0.02 second from rest to rest. The motion is made up of uniform acceleration for ¼ of time, uniform velocity for ½ of the time followed by uniform retardation. Find the maximum velocity reached and the value of acceleration and retardation.
I need detail answer do not copy A cam is required for an automated transfer mechanism. The cam follower must rise upward 10 mm with constant velocity in 3.0 sec, dwell for 2 sec, fall with constant velocity in 4 sec, dwell for 1 sec, and then repeat the sequence . a) Determine the required speed of the cam. b) Draw the displacement diagram along with velocity curve. c) The base circle diameter of the cam is 50 mm. Plot the cam profile when a knife-edge follower is incorporated.
A cam is required for an automated transfer mechanism. The cam follower must rise upward 10 mm with constant velocity in 3.0 sec, dwell for 2 sec, fall with constant velocity in 4 sec, dwell for 1 sec, and then repeat the sequence . a) Determine the required speed of the cam. b) Draw the displacement diagram along with velocity curve. c) The base circle diameter of the cam is 50 mm. Plot the cam profile when a knife-edge follower is incorporated.
A cam drive is required for a shaker platform. This platform is used to test the shipping-worthiness of packaged items. The cam follower must rise outward 1.0 in. with contant acceleration in 0.7 sec, dwell for 0.2 sec, fall with constant acceleration in 0.5 sec, and then repeat the sequence. Determine the following for the given problems: 1. Calculate the time for a full cycle 2. Calculate the required rotational speed of the cam 3. Determine the cam rotation for each follower motion interval 4. Plot the displacement diagram
A radial disc cam operates a follower in a straight line. The stroke of the follower is 30 mm and is completed in 0.02 second from rest to rest. The motion is made up of uniform acceleration for ¼ of time, uniform velocity for ½ of the time followed by uniform retardation. Find the maximum velocity reached and the value of acceleration and retardation. Note; (please provide an answer that is based on the Mechanics of Machines 1 handout MIME 3220)
Draw the cam profile for a knife-edge follower having the followingmotion: rise 50 mm during 150 deg turn with gravitational motion, dwell for 30deg, fall 50 mm during 150 deg turn with gravitational motion, and dwell for 30deg. Use 100 mm base circle. Cam rotates clockwise. Scale 1:1
A cam have the following specifications: Follower to move outward through 5 cm during 90° of cam rotation, it dwells for the next 60°. The follower then return to its original position through an angle 0R and then dwell for the rest of the cam rotation of 110°. The displacement of the follower is to take place with constant speed motion during both the outward and return strokes. The least radius of the cam is 4 cm. If the cam rotates at 300 r.p.m., construct the displacement, velocity and acceleration diagrams. Also determine The displacement, velocity, acceleration and the pressure angle for the following angles (40°, 75°, 145°, 200°).
The following data relate to a circular cam operating a flat-faced follower :Least diameter = 40 mm, Lift = 12 mm, Angle of action = 160°, Speed = 500 rpm. If the period of acceleration of the follower is 60° of the retardation during the lift, determine the main dimensions of the cam, the acceleration at main points. What is the maximum acceleration and deceleration during the lift?
The cam follower rises outward 0.75 in with constant velocity for the first 90 degrees of the motion cycle and to dwell for 130 degrees, fall with constant velocity for 45 degrees, dwell for 95 degrees, and then repeat the sequence. Graphically plot a follower displacement diagram. Use the motion equations and a spreadsheet to plot a displacementdiagram of the follower.
The prescribed motion for an application is as follows: (i) Rise 60 mm in 2.5 s using the constant velocity motion scheme. (ii) Return in 3.0 s using the cycloidal motion scheme. (iii) Dwell for 1.5 s. (iv) Repeat the sequence. Using the motion equations, find the follower acceleration at t = 0.5 s for the cycloidal motion and angular displacement of cam for the return motion.
A cam drive is used for mechanism that drives an automated assembly machine. The cam follower must rise outward 13 mm with constant velocity in 3 sec, dwell for 3 sec, fall 5 mm with constant acceleration in 2 sec, and then repeat the sequence. Determine the following for the given problems: 1. Calculate the time for a full cycle 2. Calculate the required rotational speed of the cam 3. Determine the cam rotation for each follower motion interval 4. Plot the displacement diagram