d) A cylindrical rod 100 mm long and having a diameter of 10 mm is to be defomed using a tensile load of 27,500 N. It must not experience either plastic defomation or a diameter reduction of more than 7.5 x 103 mm. Identify the suitable materials which is found in table Q1(d). Table Q1(d) Material Modulus of Elasticity Yield Strength Poisson's Ratio (MPa) (GPa) Aluminum Alloy 70 200 0.33 Brass Alloy 101 300 0.34 Steel Alloy 207 400 0.30 Titanium alloy 107 650 0.34

d) A cylindrical rod 100 mm long and having a diameter of 10 mm is to be defomed using a tensile load of 27,500 N. It must not experience either plastic defomation or a diameter reduction of more than 7.5 x 103 mm. Identify the suitable materials which is found in table Q1(d). Table Q1(d) Material Modulus of Elasticity Yield Strength Poisson's Ratio (MPa) (GPa) Aluminum Alloy 70 200 0.33 Brass Alloy 101 300 0.34 Steel Alloy 207 400 0.30 Titanium alloy 107 650 0.34

Name: d) A cylindrical rod 100 mm long and having a diameter of 10 mm is to
Uploaded: 2024-03-20T06:51:10.000Z
Channel: Bartleby
Description: d) A cylindrical rod 100 mm long and having a diameter of 10 mm is to be deformed using atensile load of 27,500 N. It must not experience either plastic defomation or a diameterreduction of more than 7.5 x 103 mm. Identify the suitable materials whi

College Physics

10th Edition

ISBN:9781285737027

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter9: Solids And Fluids

Section: Chapter Questions

Problem 55P: The inside diameters of the larger portions of the horizontal pipe depicted in Figure P9.45 are 2.50...

See similar textbooks

Similar questions

Show that the Reynolds number NRis unitless by substituting units for all the quantities in its definition and cancelling.
Normal forces of magnitude 1.0106N are applied uniformly to a spherical surface enclosing a volume of a liquid. This causes the radius of the surface to decrease from 50.000 cm to 49.995 cm. What is the bulk modulus of the liquid?
(a) The "lead" in pencils is a graphite composition with a Young's modulus of about 1109 N/ m2. Calculate the change in length of the lead in an automatic pencil if you tap it straight into the pencil with a force of 4.0 N. The lead is 0.50 mm in diameter and 60 mm long. (b) Is the answer reasonable? That is, does it seem to be consistent with what you have observed when using pencils?
(a) When water freezes, its volume increases by 9.05% (that is, V/V0=9.05102 ). What force per unit area is water capable of exerting on a container when it freezes? (It is acceptable to use the bulk modulus of water in this problem.) (b) Is it surprising that such forces can fracture engine blocks, boulders, and the like?
A disk between vertebrae in the spine is subjected to a shearing force of 600 N. Find its shear deformation, taking it to have the shear modulus of 1109 N /m2. The disk is equivalent to a solid cylinder 0.700 cm high and 4.00 cm in diameter.
Use the graph in Figure P14.46 to list the three materials from greatest Youngs modulus to smallest. Explain your reasoning. FIGURE P14.46
The inside diameters of the larger portions of the horizontal pipe depicted in Figure P9.45 are 2.50 era. Water flows to the right at a rate of 1.80 104 m3/s. Determine the inside diameter of the constriction. Figure P9.45
A fluid flows through a horizontal pipe that widens, making a 45 angle with the y axis (Fig. P15.48). The thin part of the pipe has radius R, and the fluids speed in the thin part of the pipe is v0. The origin of the coordinate system is at the point where the pipe begins to widen. The pipes cross section is circular. a. Find an expression for the speed v(x) of the fluid as a function of position for x 0 b. Plot your result: v(x) versus x. FIGURE P15.48 (a) The continuity equation (Eq. 15.21) relates the cross-sectional area to the speed of the fluid traveling through the pipe. A0v0 = A(x)v(x) v(x)=A0v0A(x) The cross sectional area is the area of a circle whose radius is y(x). The widening pan of the pipe is a straight line with slope of 1 and intercept y(0) = R. y(x) = mx + b = x + R A(x) = [y(x)]2 = (x + R)2 Plug this into the formula for the velocity. Plug this into the formula for the velocity. v(x)=A0v0(x+R)2
The inside diameters of the larger portions of the horizontal pipe depicted in Figure P9.45 are 2.50 era. Water flows to the right at a rate of 1.80 104 m3/s. Determine the inside diameter of the constriction. Figure P9.45
(a) Estimate the force with which a karate master strikes a board, assuming the hands speed at the moment of impact is 10.0 m/s and decreases to 1.00 m/s during a 0.002 00-s time interval of contact between the hand and the board. The mass of his hand and arm is 1.00 kg. (b) Estimate the shear stress, assuming this force is exerted on a 1.00-cm-thick pine board that is 10.0 cm wide, (c) If the maximum shear stress a pine board can support before breaking is 3.60 106 N/m2, will the board break?
Is surface tension due to cohesive or adhesive forces, or both?
A certain hydraulic system is designed to exert a force 100 times as large as the one put into it. (a) What must be the ratio of the area of the slave cylinder to the area of the master cylinder? (b) What must be the ratio of their diameters? (c) By what factor is the distance through which the output force moves reduced relative to the distance through which the input force moves? Assume no losses to friction.