Please answer all subparts for like either dislike is ready Please sir or mam... (46) The additional resistance required in the field circuit to reduce the emf to 350 V is equal to ..a 20.3N......6 30.8N.© 53.4N.d 66.7N.(47) The critical field resistance for 600 rpm is equal to ..a 1502.6 2002.300Ω.d 4002.(48) The critical speed at 1002 field circuit resistance is equal to ..@ 200грm.Б 300 грm.400 rpm.@ 500 грm.(49) The lowest speed with 10ON field circuit resistance in order to obtain emf of 300 V is equal toa 280.7 rpm.ъ 303.6 гpm.© 467.5 rpm.@ 534.3 грm. Data for points from 45 to 49 is given as:The OCC of a de shunt generator driven at 600 rpm is given as followsField current, A0.51234Open-circuit terminal voltage, V75225330390410425(45) The emf to which the generator will excite when the field circuit resistance is 1002 is equal to ...a 400 V.6 415 V.© 430 V.(d) 450 V.

Given data is for DC generator running at 600 rpm We can plot OCC characteristics based on given…

Data for points from 45 to 49 is given as: The OCC of a de shunt generator driven at 600 rpm is given as follows Field current, A 0.5 1 2 3 4 5 Open-circuit terminal voltage, V 75 225 330 390 410 425 The emf to which the generator will excite when the field circuit resistance is 100N is equal to a 400 V. 6 415 V. 430 V. d 450 V.

Data for points from 45 to 49 is given as: The OCC of a de shunt generator driven at 600 rpm is given as follows Field current, A 0.5 1 2 3 4 5 Open-circuit terminal voltage, V 75 225 330 390 410 425 The emf to which the generator will excite when the field circuit resistance is 100N is equal to a 400 V. 6 415 V. 430 V. d 450 V.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

A 3 phase, star connected synchronous generator supplies current of 10A having phase angle of 20º lagging at 400V. Find the load angle and the components of armature current Id and Iq if Xd = 10 ohm and Xq = 6.5 ohm Assume armature resistances to be negligible
The open-circuit characteristic of a shunt generator when driven at normal speed is as;Field current (A)0.51.01.52.02.53.03.5O.C. volts (V)54107152185210230240The resistance of armature circuit is 0.1 Ω. Due to armature reaction the effective field current is given by the relation Ish (eff.) = Ish − 0.003 Ia. Find the shunt field circuit resistance that will give a terminal voltage of 220 V with normal speed (a) on open circuit (b) at a load current of 100 A. Also find (c) number of series turns for level compounding at 220 V with 100 A armature current; take number of shunts turns per pole as 1200 and (d) No. of series turns for over-compounding giving a terminal voltage of 220 V at no-load and 230 V with 100 A armature current.
The open-circuit characteristic of a shunt generator when driven at normal speed is as;Field current (A)0.51.01.52.02.53.03.5O.C. volts (V)54107152185210230240The resistance of armature circuit is 0.1 Ω. Due to armature reaction the effective field current is given by the relation Ish (eff.) = Ish − 0.003 Ia. Find the shunt field circuit resistance that will give a terminal voltage of 220 V with normal speed (a) on open circuit (b) at a load current of 100 A. Also find (c) number of series turns for level compounding at 220 V with 100 A armature current; take number of shunts turns per pole as 1200 and (d) No. of series turns for over-compounding giving a terminal voltage of 220 V at no-load and 230 V with 100 A armature current.please answer only part C and D
A gas turbine, 2-pole, 3? synchronous generator rated at 200 MW is connected to the grid (presumed to be an infinite bus). The electrical operating frequency of the grid is 60 Hz, and the slope of the frequency-power curve for the generator is 15 MW/Hz. a. If the no-load setpoint for the generator is set to 63.5 Hz, how much active power will the generator provide to the grid? b. Neglecting system losses, what is the torque provided by the gas turbine? c. What would happen if the no-load setpoint for the generator is set to 59 Hz?
A shunt generator supplies a 31kW load at 230V through cables of resistance, R = 122mΩ. If the field winding resistance, Rf =50Ω and the armature resistance, Ra =51mΩ. Determine the following below: The terminal voltage is, Answer and unit for part 1 The e.m.f. generated in the armature is,
A long-shunt compound d.c. generator with armature, series field and shunt field resistance of 0.5, 0.4 and 250 Ω respectively gave the following readings when run at constant speed : Load current (A) : 0 10 20 30 40Terminal p.d. (V) : 480 478 475 471 467 Plot the curve of internal generated e.m.f. against load current. Explain fully the steps by which this curve is obtained and tabulate the values from which it is plotted.
A 480-V, 60-Hz, Y-Connected synchronous generator,having the synchronous reactance of 1.04 ohm andnegligible armature resistance, is operating alone. Theterminal voltage at rated field current at open circuitcondition is 480V.1. Calculate the voltage regulation1. If load current is 100A at 0.8 PF lagging2. If load current is 100A at 0.8 PF leading3. If load current is 100A at unity PF2. Calculate the real and reactive power delivered in eachcase.3. State and explain whether the voltage regulation willimprove or not if the load current is decreased to 50 Afrom 100 A at 0.8 PF lagging.
(a) A short shunt cumulative compound dc generator supplies 6kW at 235V. The Shunt field resistance, Series field resistance and Armature resistances are 8012, 0.192 and 0.22 respectively. Calculate the induced emf and load resistance.
A 150-kW 250-volt compound generator is connected long shunt. If the shunt field resistance is 20 ohms, what is the series field-current at full load? (Ans.: 612.5 A) write diagram, given, etc
A 3 phase 4MVA, 12 kV star connected synchronous generator has Zs= 0.8+J30 ohm. Using circle diagram only, find: 1. The output power developed at unity power factor with excitation equal to 1.25 of rated voltage. 2. The load angle and power factor if the generator supplies (1500 KW) at rated voltage and excitation lequal to (1.2) of rated voltage. 3. Repeat part (2) when .armature resistance is neglected
A 2082V, 1500-kVA 0.8-PF-lagging 60-Hz two-pole Y-connected synchronous generator has a synchronous reactance of 1.5 Ω and an armature resistance of 0.25 Ω. At 60 Hz, its friction and windage losses are 24 kW, and its core losses are 18 kW. The field circuit has a dc voltage of 200 V, and the maximum is 10 A. The resistance of the field circuit is adjustable over the range from 20 to 200 Ω. The OCC of this generator is shown in Figure-1 Assume that the field current of the generator has been adjusted to a value of 5 A. Compute the terminal voltage of this generator be if it is connected to a ∆-connected load with an impedance of 20∠30° Ω ? Sketch the phasor diagram of this generator. Compute is the efficiency of the generator at these conditions? Now assume that another identical ∆-connected load is to be paralleled with the first one. What happens to the phasor diagram for the generator? What is the new terminal voltage after the load has been added? What must be done to restore the…
A 10kW 220 volt compound generator is operated at no load at theproper armature voltage and speed, from which the stray power losscalculations are determined to be 705 watts. The shunt field resistance is110 ohms, the armature resistance is 0.265 ohm, and the series fieldresistance is 0.035 ohm. Assume a 2 volt brush drop and (a) calculate thefull load efficiency. (b) Calculate also the maximum efficiency.