Part 1:Data has been gathered from a lifting system used to transport engine parts. The systemconsists of a drum and cable. The following data was obtained when the drum lowers the load(assume constant acceleration).Drum diameter = 0.5mMass of load = 4.5kgDrumInitial velocity = 0 m/sTime to descend = 32 secsDistance travelled = 0.35mYou have been asked to use this information to determine:Cablea) The final linear velocity of the loadb) The linear acceleration of the loadc) The final angular velocity of the drumd) The angular acceleration of the drume) The tension force in the cablef) The torque applied to the drumLoadFiøure 1In determining the above quantities, you should clearly state the formulae used and applydimensional analysis techniques to show that all values/units used are homogeneous.From the formulae used (above) you should apply dimensional analysis techniques to developtwo equations for power (in terms of linear velocity and angular velocity).

Given Mass of load =4.5 kg Drum diameter =0.5 m

Answered: Data has been gathered from a lifting…

Classical Dynamics of Particles and Systems

5th Edition

ISBN:9780534408961

Author:Stephen T. Thornton, Jerry B. Marion

Publisher:Stephen T. Thornton, Jerry B. Marion

Chapter10: Motion In A Noninertial Reference Frame

Section: Chapter Questions

Problem 10.5P

See similar textbooks

Similar questions

Systems are in equilibrium. If the spring scales are calibrated in newtons, what do they read? Ignore the masses of the pulleys and strings and assume the pulleys and the incline are frictionless. (Let m = 2.66 kg and ? = 29.0°.) scale in (a) N scale in (b) N scale in (c) N scale in (d) N
Determine the tension in the rope AC and BC ( take g=10 m/s^2)
The spool has a mass, m, and a radius of gyration kG. An inextensible cord is attached to the wall at point A, and is wrapped around the inner portion of the spool. The inner radius is R and the outer radius is 2R. The coefficient of friction between the spool and the ground is mu. The instantaneous center of zero rotation is located at point C. Find Fcrit (the force needed to cause motion) applied at point B. If the force is increased to 2Fcrit what is the linear acceleration of the center of mass? If the force is 2Fcrit what is the tension in cord AC?
The “lead” in pencils is a graphite composition with Young’s modulus of approximately 1.0×109 N/m2. Calculate the change in length of the lead in an automatic pencil if you tap it straight into the pencil with a force of 6.8 N. The lead is 0.52 mm in diameter and 80 mm long. Round your answer to 5 decimal places.
4. A torsion prescription balance has a sensitivity requirement of 0.004 g. Explain how you would weigh 0.008 g of a substance with an error not greater than 5%.
A Ferris wheel has radius of 5.0 m and makes one revolution in 8.0 seconds. A person weighing 670 N is sitting on one of the benches attached at the rim of the wheel. What is the apparent weight (that is, the normal force in Newtons exerted on her by the bench) of the person as she passes through the highest point of her motion? (Don't forget about sigfigs) I understand how to calculate the answer but cannot determine the correct number of sig figs for the final answer.
The 2.7-kg pendulum bob moves in the vertical plane with a velocity of 8 m/s when θ = 0∘. Neglect the size of the bob. (A) Determine the initial tension in the cord. Express your answer to three significant figures and include the appropriate units. (B) Determine the tension in the cord at the instant the bob reaches θθ = 30∘∘. Express your answer to three significant figures and include the appropriate units.
A belt connecting 350 lb block A and 125 lb block B passes over a fixed drum. For this condition, determine the minimum coefficient of static friction, μs,min, required to maintain the system in equilibrium. μs,min =
If there are problems on drift velocity in which radius is given, what formula should we use in determining the cross-sectional area that is expressed in square meters? A. A = π r2 B. V = π r2 h C. V = π r h D. A = π r
Your roommate is working on his bicycle and has the bike upside down. He spins the 56.0 cmcm -diameter wheel, and you notice that a pebble stuck in the tread goes by three times every second. What is the pebble's acceleration? Express your answer with the appropriate units.
A copper wire of diameter 1.0 cm stretches 1.0% when it is used to lift a load upward with an acceleration of 2.0 m/s2. What is the weight of the load?
Please help and break down into easy steps and double check the answer please

SEE MORE QUESTIONS

Recommended textbooks for you

Classical Dynamics of Particles and Systems

Physics

ISBN:

9780534408961

Author:

Stephen T. Thornton, Jerry B. Marion

Publisher:

Cengage Learning

Glencoe Physics: Principles and Problems, Student…

Physics

ISBN:

9780078807213

Author:

Paul W. Zitzewitz

Publisher:

Glencoe/McGraw-Hill

Classical Dynamics of Particles and Systems

Physics

ISBN:

9780534408961

Author:

Stephen T. Thornton, Jerry B. Marion

Publisher:

Cengage Learning

Glencoe Physics: Principles and Problems, Student…

Physics

ISBN:

9780078807213

Author:

Paul W. Zitzewitz

Publisher:

Glencoe/McGraw-Hill

SEE MORE TEXTBOOKS