Alnu tme rest Hitroģen (N2).Calculate: (i) Composition of the gas by mass. (ii) Average molecular weight. (iii)Density of the gas at 30°C and 200 kN/m².3.60 A mixture of gas has the following composition by volume:Methane = 80%Ethane = 12%and Nitrogen = 8%.Calculate: (i) The composition of gas by weight%. (ii) Average molecular weight.(iii) Density of the gas mixture at 30°C and 750 mmHg. (iv) Specific gravity.3.61 A by-product of coke oven produces 30,000 m3 of gas per hour having thefollowing analysis:C6H6 = 5%CHs = 5%CH4 = 40%CO = 7%H2 = 35%CO2 = 5%N2 = 3%The gas leaves the oven at 1.4 atm and 390 °C. After cooling to 40°C, the benzeneand toluene are completely removed by absorption. Calculate: (i) Averagemolecular weight of the gas entering the absorber. (ii) Weight of gas leaving theoven per hour. (iii) Volumetric composition of the gas leaving the absorber. (iv)Weight of benzene and toluene absorbed.

“Since you have asked multiple questions, we will solve the first question for you. If you want any…

Delisity UI the gas al 30°C and 200 kN/m2. 3.60 A mixture of gas has the following composition by volume: Methane = 80% Ethane = 12% %3D and Nitrogen = 8%. Calculate: (i) The composition of gas by weight%. (ii) Average molecular weight. (iii) Density of the gas mixture at 30°C and 750 mmHg. (iv) Specific gravity.

Delisity UI the gas al 30°C and 200 kN/m2. 3.60 A mixture of gas has the following composition by volume: Methane = 80% Ethane = 12% %3D and Nitrogen = 8%. Calculate: (i) The composition of gas by weight%. (ii) Average molecular weight. (iii) Density of the gas mixture at 30°C and 750 mmHg. (iv) Specific gravity.

Chemistry & Chemical Reactivity

10th Edition

ISBN:9781337399074

Author:John C. Kotz, Paul M. Treichel, John Townsend, David Treichel

Publisher:John C. Kotz, Paul M. Treichel, John Townsend, David Treichel

Chapter10: Gases And Their Properties

Section10.8: Nonideal Behavior Of Gases

Problem 2.3ACP: To stay aloft, a blimp must achieve neutral buoyancy; that is, its density must equal that of the...

See similar textbooks

Similar questions

Gypsum (plaster of Paris : CaSO,. 2H,0) is produced by the reaction of calcium carbonate and sulfuric acid. A certain lime stone analyzes: CaCO, 96.89 %; MgCO, 1.41 %; inerts 1.70 %. For 5 metric tons of limestone reacted completely, determine: a. kg of anhydrous gypsum (CaSO,) produced. b. kg of sulfuric acid solution (98 wt%) required.
The label has come off a cylinder of gas in your laboratory. You know only that one species of gas is contained in the cylinder, but you do not know whether it is hydrogen, oxygen, or nitrogen. To find out, you evacuate a 5-liter flask, seal it and weigh it, then let gas from the cylinder flow into it until the gauge pressure equals 1.00 atm. The flask is reweighed, and the mass of the added gas is found to be 13.0 g. Room temperature is 27°C, and barometric pressure is 1.00 atm. What is the gas?
To evaluate the use of renewable resources, an experiment was carried out with rice hulls. After pyrolysis, the product gas analyzed 6.4% CO2, 0.1% O2, 39% CO, 51.8% H2, 0.6% CH4, and 2.1% N2. It entered a combustion chamber at 90 °F and a pressure of 35.0 in. Hg and was burned with 40% excess air (dry) at 70 °F and an atmospheric pressure of 29.4 in. Hg; 10% of the CO remains. a. How many cubic feet of air were supplied per cubic foot of entering gas? b. How many cubic feet of product gas were produced per cubic foot of entering gas if the exit gas was at 29.4 in. Hg and 400 °F?
P1A.6 The molar mass of a newly synthesized fluorocarbon was measured in a gas microbalance. is device consists of a glass bulb forming one end of a beam, the whole surrounded by a closed container. The beam is pivoted, and the balance point is attained by raising the pressure of gas in the container, so increasing the buoyancy of the enclosed bulb. In one experiment, the balance point was reached when the fluorocarbon pressure was 327.10Torr; for the same setting of the pivot, a balance was reached when CHF3 (M = 70.014 g mol−1) was introduced at 423.22 Torr. A repeat of the experiment with a di erent setting of the pivot required a pressure of 293.22 Torr of the uorocarbon and 427.22 Torr of the CHF3. What is the molar mass of the fluorocarbon? Suggest a molecular formula.
stack gas analysis: 83.08% N2, 7.5% CO2, 2.3% CO, 1.12% H2, 6% O2 with a saturation temperature of 54°C at 400°C and 760mmHg. a) %excess of air (1000 m^3 of air is supplied, produced 3100 m^3 of stack gas) b) chemical formula of the fuel burned c) analysis of the fuel mixture
If 15.1 g of the mixture with a volumetric composition of 45% N2, 35% O2 and 20% X gas is applying 3 atm pressure to a 5 dm3 volume vessel at 25 ° C, in which option is the molecular weight of X gas given correctly? (MN2: 28 gmol-1, MO2: 32 gmol-1)
Chemistry 1. 150 Liter/min of gas (carbon monoxide) is emitted from a process at T= 45°C and P=1.05 atm. Calculate the mass flow rate of carbon monoxide if the gas stream contains 40 ppmv CO 2. What is the volume occupied by one mole of propane (C3H8) at STP? [b] The propane is burned in dry air and under stoichiometric conditions. An exhausted gas is formed, cooled, and captured. What volume of exhaust gas is produced by one mole of exhaust gas at STP? [c] What volume of exhaust gas is produced under stoichiometric conditions?
A 20-cu ft tank at 100 degrees F is pressured to 200 psia with a pure paraffin gas. Ten pounds of ethane are added, and the specific gravity of the gas mixture is measured to be 1.68. Assume that the gases act as ideal gases. What was the gas originally in the tank?
Calculate the partial pressure (Pa) of CO2 in a mixture that contains 45% wt CO2, 35% wt CO and 20% wt O2 at 100 deg C and 1.5 atm.
100.0 g of propyne (C3H4) (g) is burnt in a 30.0 L rigid vessel containing pure O2 (g) at P = 10.00 bar and an initial temperature of 25.0 °C. At the end of the reaction the temperature of the vessel is 250. °C. At the end of the reaction, what are the partial pressures (in bar) of CO2 (g) and O2 (g)?
The gas A(g) (1 mole) undergoes a two-step process one after another as described below :i) The gas is expanded at 25°C and from 1 bar pressure against a constant pressure of 0.2 bar and the final volume of the gas is the twice the initial volume.ii) The gas is cooled down to -25°C at constant volume.Cv,m = 3/2 RCalculate ΔU, ΔH, q and w for the each step and for the entire process
Producer gas is a fuel that is manufactured from the reaction of coal, steam and air. A producer gas has the following composition by volume (dry basis): 20.35% CO, 11.03%, CO2, 15% H2, 51.43% N2, 1.98%O2 and 0.21 % CH4. The gas is flowing at 6000 cfm. It has a temperature of 200℃ , a pressure of 21 cm Hg and a partial pressure of 50 mm Hg for H2O. The atmospheric pressure is 758 mm Hg. The gas is delivered from the source to the furnace by means of a pipe. It cools down to 50 ℃ and is compressed to 2 atm pressure. At this condition, calculate:1. the volumetric flow ate2. the mass flow rate3. the partial pressure of each component/including water)4. complete analysis of the mixture