Determine the dielectric stress per cm which can be applied on a single core cable working at 132 KV, 3-phase system, if the value of internal diameter of sheath which investigates the most economical size of conductor is 8.2 cm.please i need it know pleasr Determine the dielectric stress percm which can be applied on a singlecore cable working at 132 KV, 3-phasesystem, if the value of internaldiameter of sheath which investigatesthe most economical size of.conductor is 8.2 cm

Given, Line voltage = 132 KV Phase voltage = 76.21 V Internal diameter is 8.2 cm

Determine the dielectric stress per cm which can be applied on a single core cable working at 132 KV, 3-phase system, if the value of internal diameter of sheath which investigates the most economical size of conductor is 8.2 cm. please

Determine the dielectric stress per cm which can be applied on a single core cable working at 132 KV, 3-phase system, if the value of internal diameter of sheath which investigates the most economical size of conductor is 8.2 cm. please

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter4: Transmission Line Parameters

Section: Chapter Questions

Problem 4.12MCQ

See similar textbooks

Related questions

Q: 1- Conductor cables are considered the active elements of a transmission line, as they carry…

A: Since you have asked multiple questions, we will solve the first question for you. If you want any…

Q: a) The conductor shown in the figure below is composed of five strands. The diameter of each strand…

Q: The diameter of the overhead lines in the form of cylindrical conductors in a 300 kV three-phase…

A: Given diameter = 20mm, Vline = 300kV. Your b subpart is not clear I assume you have asked for…

Q: The number of disc insulators used in a suspension insulator setup with string efficiency 90 %,…

Q: A 84 meter long conductor with a unit weight of q=(0.8) kg/m is separated from each other. It is…

A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…

Q: Which among these is used to determine or compute for the Transmission Line AC Resistance? A.…

A: power losses = (current)2*Ac resistance where as dc resistance = resistivity×lengthcross sectional…

Q: A transmission line subjected to wind and ice loading with a span of 65 m between level supports has…

A: Given length of span l =65 m weight of conductor =w=3.5 kg Total weight =wt =6 kg weight of ice wi…

Q: 3. The towers of height 35 m and 95 m respectively support a transmission line conductor at water…

Q: E 5m A 7m 5m B 7m 7m C

Q: A 3-phase, 60 Hz, 125-mile transmission line has a flat horizontal spacing. The conductors have an…

A: Given distance between two conductors is 12 m and diameter of conductor is 3.28 Cm.

Q: A three-phase line has three equilaterally spaced conductors of ACSR Dove. If theconductors are 10…

A: Overall conductor diameter, D = 0.0314ft = (0.0314 * 0.3048) m = 9.5707 mm [ 1ft = 0.3048m] Overall…

Q: The three conductors A, B and C of a 3-φ line are arranged in a horizontal plane with DAB = 2 m and…

Q: It is planned to implement a transmission line that will feed a 50 mw load. The selected normalized…

A: Given values are -

Q: Rework Problem 1 if the diameter of each conductor is: (a) increased by 20% to 1.8 cm, (b) decreased…

Q: Calculate the value of full-load absorbing reactive loss for 3-phase, 450 MVA, 50 Hz, 400kV, 400 mm2…

Q: 1. A transmission line conductor is supported from two towers at heights of 70 m above water level.…

A: Given, Height of the two towers =70m Distance(l) =300m Tension(T) =1500kg Size of conductor(A)…

Q: Parameters of Line transmission representations. Capacitance. Find the capacitance and capacitive…

A: The solution can be achieved as follows.

Q: In a three-phase 220 kV, 60 Hz overhead transmission line, the conductors have an overall radius of…

Q: (a) Conductors of a 3-phase line are arranged at the corners of a triangle of sides 15, 15, and 18…

Q: An overhead transmission line is supported at a river crossing by two towers of height 34 m. The…

A: As per Bartleby guidelines we are allowed to solve only three subparts, please ask the rest again.

Q: The diameter of the overhead lines in the form of cylindrical conductors in a 380 kV three-phase…

A: Given: RMS line voltage VL=380 kV, RMS value of puncture strength of air g=302=21.21 kV/cm.

Q: 1. Find the GMR and GMD of the given stranded conductor with radius 1.3cm.

A: In this question, Find the GMR and GMD if radius of the conductor r= 1.3cm

Q: Figure shows a stranded conductor identical strands each of having 7. radius r. Find the self…

A: Self GMD: this is also called as geometric mean radius. This is calculated for every phases. it does…

Q: Calculate the Inductance, in Henry per meter, of each conductor in a Three-Phase, Three-Wire System…

A: A good problem on power system. Look below for solution:-

Q: A 10 km long, transmission-line has two parallel conductors placed 2 metres apart. The diameter of…

A: Given L =10 km D =1.4 cm P =2x83x10-8 Ω-mt

Q: A- Define Impedence. Mention the difference between Impedence and Resistance ? B- A coaxial cable's…

A: Brief description : In the above given question they want to know the definition of impedance and…

Q: The conductor of a single-phase 60-Hz line is a solid round aluminum wire having a diameter of 0.412…

Q: Homer work. An over head transmission line has a cross area of conductor of 4 cm and supported from…

Q: 4.10 A 60-Hz, three-phase three-wire overhead line has solid cylindrical conductors arranged in the…

A: As per QnA policy we are allowed to answer only one question in case of multiple questions. Here I…

Q: Determine the dielectric stress per cm which can be applied on a single core cable working at 33 KV,…

Q: How the expression for the lowest point of the catenary curve if the supports are at different…

A: Explanation: Given that, allowable tensile strength = 800 kg, safety factor = 2, span length (L)…

Q: conductors have an overall diameter of 3.0 cm each and are arranged in delta formation. Assuming a…

A: In this question we will find spacing between conductors for given critical disruptive voltage.....

Q: 1. The engineering calculations for an 800-ampere service-entrance call for two 500 kcmil copper…

A: Given the two Copper conductors per phase connected in parallel Rating of service conductors = 800 A…

Q: 4.12 Find the inductive reactance per mile of a single-phase overhead trans- mission line operating…

Q: The diameter of an AWG no.4 conductor is defined to be 0.4600 inch. Stranded conductors of this…

A: Given diameter of the AWG no.4 conductor is 0.4600 inch There are 19 strands in conductor

Q: 1. Find the amapacity of a # 14 AWG copper conductor with type THHN insulation. The conductor is to…

A: Note: As per our honor code, we are authorized to answer only one question at the moment. If you…

Q: For the polished conductors having radius of 1 cm equally at a distance of 100 cm, caring of 3 phase…

Q: The three conductors A, B and C of a 3-φ line are arranged in a horizontal plane with DAB = 2 m and…

A: Since, the conductors are arranged in the horizontal plane as shown below: The equivalent distance…

Q: The towers of height 45 m and 80 m respectively support a transmission line conductor at water…

Q: In a 380 kV three-phase transmission system, the diameter of the overhead lines in the form of…

A: Part (a): The line voltage is given as 380 kV. The disruptive critical voltage is determined as:…

Q: Example 4 : Determine the efficiency and regulation of a 3-phase, 100 km, 50 Hz transmission line…

Q: Q2: A single-phase transmission line consisting of two conductors, the radius of each conductor is…

Q: The diameter of an AWG no.4 conductor is defined to be 0.4600 inch. Stranded conductors of this…

A: Given, Required diameter of conductor : 0.4600 inch No. of strands = 19 to find diameter and…

Q: A 3-phase 60-Hz line has flat horizontal spacings. The conductors have an outside diameter of 3.28…

A: Given that diameter of conductor = 3.28cm f=60 Hz Spacing between conductors =12 m Hence,…

Q: The towers of height 45 m and 80 m respectively support a transmission line conductor at water…

Q: The conductor shown in the figure below is composed of five strands. The diameter of each strand is…

A: Five strands Diameter D= 2.5mm GMR= geometric mean radius?

Q: The Capacitive Reactance to Neutral at 60 Hz of a solid conductor in a single-phase line with 5-ft…

Question

Determine the dielectric stress per
cm which can be applied on a single
core cable working at 132 KV, 3-phase
system, if the value of internal
diameter of sheath which investigates
the most economical size of
.conductor is 8.2 cm

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

One thousand circular mils or 1 kcmil is sometimes designated by the abbreviation MCM75C. Data for commercial bare-aluminum electrical conductors lists a 60 Hz resistance of 0.0080 ohm per kilometer at for a 793-MCM AAC conductor. Determine the cross-sectional conducting area of this conductor in square meters. Find the 60 Hz resistance of this conductor in ohms per kilometer at 50C.
The Aluminum Electrical Conductor Handbook lists a dc resistance of 0.01558 ohm per 1000 ft at 20C and a 60-Hz resistance of 0.0956 ohm per mile at 50C for the all-aluminum Marigold conductor, which has 61 strands and whose size is 1113 kcmil. Assuming an increase in resistance of 2 for spiraling, calculate and verify the dc resistance. Then calculate the dc resistance at 50C, and determine the percentage increase due to skin effect.
Find the inductive reactance per mile of a single-phase overhead transmission line operating at 60 Hz given the conductors to be Partridge and the spacing between centers to be 30 ft.
Determine the GMR of each of the unconventional stranded conductors shown in Figure 4.30. All strands have the same radius r.
A 60-Hz, single-phase two-wire overhead line has solid cylindrical copper conductors with a 1.5 cm diameter. The conductors are arranged in a horizontal configuration with 0.5 m spacing. Calculate in mH/km (a) the inductance of each conductor due to internal flux linkages only, (b) the inductance of each conductor due to both internal and external flux linkages, and (c) the total inductance of the line.
What are the colors of the conductors in nonmetallic-sheathed cable for a. 2-wire cable? _______________, _______________ b. 3-wire cable? _______________, _______________, _______________
For the overhead line of configuration shown in Figure 4.33 operating at 60 Hz and a conductor temperature of 700C, determine the resistance per phase, inductive reactance in ohms/mile/phase, and the current-carrying capacity of the overhead line. Each conductor is ACSR Cardinal of Table A.4.
Determine the dielectric stress per cm which can be applied on a single core cable working at 33 KV, 3-phase system, if the value of internal diameter of sheath which investigates the most economical size of conductor is 4.85 cm.
The conductors of a 10 km long, single phase, two wire line are seperated by a distance of 1.5 m. The diameter of each conductor is 1 cm. If the conductors are of copper, the inductance of the circuit is ??
The Aluminum Electrical Conductor Handbook lists a dc resistance of 0.01558 ohm per 1000 ft (or 0.05112 ohm per km) at 20 degree celcius and a 60 Hz resistance of 0.0956 ohm per mile (or 0.0594 ohm per km) at 50 degree celcius for the all-aluminum Marogold conductor, which has 61 strands and whose size is 564 mm2 or 1113 kcmil. Assuming an increase in resistance at 50 degree celcius, and determine the percentage due to skin effect.
The diameter of the overhead lines in the form of cylindrical conductors in a 380 kV three-phase transmission system is 28 mm.a) - How much distance should there be between two conductors using the maximum area calculation equations?Calculate. (Puncture peak strength of air is 30kV / cm.)b) - In this configuration, if the distance between phase conductors is 4m, at what voltage levelCalculate the discharge occurs?c) - Maximum electric field in the same configuration, for electrode distances to be 8mCalculate the value. If needed in calculations Ꜫ0 = 8.854x10-12 F / m)
For the polished conductors having radius of 1 cm equally at a distance of 100 cm, caring of 3 phase supply line under 76 cm pressure at 25 degree centigrade. For the standard condition, find the minimum phase neutral voltage at which corona occurs.