The Aluminum Electrical Conductor Handbook lists a dc resistance of 0.01558 ohm per 1000 ft (or 0.05112 ohm per km) at 20 degree celcius and a 60 Hz resistance of 0.0956 ohm per mile (or 0.0594 ohm per km) at 50 degree celcius for the all-aluminum Marogold conductor, which has 61 strands and whose size is 564 mm2 or 1113 kcmil. Assuming an increase in resistance at 50 degree celcius, and determine the percentage due to skin effect.

The Aluminum Electrical Conductor Handbook lists a dc resistance of 0.01558 ohm per 1000 ft (or 0.05112 ohm per km) at 20 degree celcius and a 60 Hz resistance of 0.0956 ohm per mile (or 0.0594 ohm per km) at 50 degree celcius for the all-aluminum Marogold conductor, which has 61 strands and whose size is 564 mm2 or 1113 kcmil. Assuming an increase in resistance at 50 degree celcius, and determine the percentage due to skin effect.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter4: Transmission Line Parameters

Section: Chapter Questions

Problem 4.1P: The Aluminum Electrical Conductor Handbook lists a dc resistance of 0.01558 ohm per 1000 ft at 20C...

See similar textbooks

Similar questions

One thousand circular mils or 1 kcmil is sometimes designated by the abbreviation MCM75C. Data for commercial bare-aluminum electrical conductors lists a 60 Hz resistance of 0.0080 ohm per kilometer at for a 793-MCM AAC conductor. Determine the cross-sectional conducting area of this conductor in square meters. Find the 60 Hz resistance of this conductor in ohms per kilometer at 50C.
Find the inductive reactance per mile of a single-phase overhead transmission line operating at 60 Hz given the conductors to be Partridge and the spacing between centers to be 30 ft.
A transmission-line cable with a length of 2 km consists of 19 strands of identical copper conductors, each 1.5 mm in diameter. Because of the twist of the strands, the actual length of each conductor is increased by 5. Determine the resistance of the cable if the resistivity of copper is 1.72-cm at 20C.
The three conductors A, B and C of a 3-φ line are arranged in a horizontal plane with DAB = 2 m and DBC = 2·5 m. Find line-to-neutral capacitance per km if diameter of each conductor is 1·24 cm. The conductors are transposed at regular intervals
The three conductors A, B and C of a 3-φ line are arranged in a horizontal plane with DAB = 2 m and DBC= 2·5 m. Find line-to-neutral capacitance per km if diameter of each conductor is 1·24 cm. The conductors are transposed at regular intervals. [0·0091 μF/km]
The conductors of a 10 km long, single phase, two wire line are seperated by a distance of 1.5 m. The diameter of each conductor is 1 cm. If the conductors are of copper, the inductance of the circuit is ??
The three conductors A, B and C of a 3-φ line are arranged in a horizontal plane with DAB = 2 m and DBC = 2·5 m. Find line-to-neutral capacitance per km if diameter of each conductor is 1·24 cm. The conductorsare transposed at regular intervals.
A 115 kv line has a horizontal configuration. The distance between adjacent conductors is 9ft. What is the geometric mean distance of the line?
The three conductors of a 3-φ line are arranged at the corners of a right angled isosceles triangle. If each equal side of this triangle is 2 m, find line-to neutral capacitance per km. Take the diameter of each conductor as 1·24 cm. The conductors are transposed at regular intervals. [0·0094 μF/km]
A three-phase line has three equilaterally spaced conductors of ACSR Dove. If theconductors are 10 ft apart, determine the 60-Hz per-phase reactance of the line in W/km
Problem: 3-Phase Belted Conductors Assume a 2 mile long, three- conductor belted cable is connected to a 24.9 KV, three-phase, 60 Hz bus. The charging current per conductor is found to be j8.31 A. A test result shows that the capacitance between all conductors bunched together with sheath is 0.8 u F/mi. tau What must be the measured capacitance between two conductors bunched together with the sheath and the third conductor ?
The diameter of the overhead lines in the form of cylindrical conductors in a 300 kV three-phase transmission system is 20 mm.a) - How much distance should there be between two conductors using the maximum area calculation equations?Calculate. (Puncture peak strength of air is 30kV / cm.)b) - In this configuration, if the distance between phase conductors is 0m, at what voltage levelCalculate the discharge occurs?c) - Maximum electric field in the same configuration, for electrode distances to be 0mCalculate the value. If needed in calculations Ꜫ0 = 8.854x10-12 F / m)