Determine the heat flux for a furnace wall made of fire clay if the furnace wall thickness is 6’’ and the thermal conductivity of the furnace clay is 0.3 W/m-K. The furnace wall temperature can be taken to be same as furnace operating temperature which is 650°C, and temperature of the outer wall is 150°C.

Determine the heat flux for a furnace wall made of fire clay if the furnace wall thickness is 6’’ and the thermal conductivity of the furnace clay is 0.3 W/m-K. The furnace wall temperature can be taken to be same as furnace operating temperature which is 650°C, and temperature of the outer wall is 150°C.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter1: Basic Modes Of Heat Transfer

Section: Chapter Questions

Problem 1.9P: Heat is transferred at a rate of 0.1 kW through glass wool insulation (density=100kg/m3) with a 5-cm...

See similar textbooks

Similar questions

Heat is transferred at a rate of 0.1 kW through glass wool insulation (density=100kg/m3) with a 5-cm thickness and 2-m2 area. If the hot surface is at 70C, determine the temperature of the cooler surface.
1.19 A cryogenic fluid is stored in a 0.3-m-diameter spherical container is still air. If the convection heat transfer coefficient between the outer surface of the container and the air is 6.8 , the temperature of the air is 27°C, and the temperature of the surface of the sphere is –183°C, determine the rate of heat transfer by convection.
2.55 A long, 1-cm-diameter electric copper cable is embedded in the center of a 25-cm-square concrete block. If the outside temperature of the concrete is 25oC and the rate of electrical energy dissipation in the cable is 150 W per meter length, determine temperatures at the outer surface and at the center of the cable.
3.16 A large, 2.54-cm.-thick copper plate is placed between two air streams. The heat transfer coefficient on one side is and on the other side is . If the temperature of both streams is suddenly changed from 38°C to 93°C, determine how long it takes for the copper plate to reach a temperature of 82°C.
1.1 On a cold winter day, the outer surface of a 0.2-m-thick concrete wall of a warehouse is exposed to temperature of –5°C, while the inner surface is kept at 20°C. The thermal conductivity of the concrete is 1.2 W/m K. Determine the heat loss through the wall, which is 10-m long and 3-m high. Problem 1.1
A cooling system is to be designed for a food storage warehouse for keeping perishable foods cool prior to transportation to grocery stores. The warehouse has an effective surface area of 1860 m2 exposed to an ambient air temperature of 32C. The warehouse wall insulation (k=0.17W/(mK)) is 7.5 cm thick. Determine the rate at which heat must be removed (W) from the warehouse to maintain the food at 4C.
In an experiment to measure the thermal conductivity of a plate of unknown material with area 1 m2 and thickness 0.1m, one of its surfaces is maintained at 100 °C and the other at 20 °C and a heat at the rate of 100 kW was supplied across it. Determine the thermal conductivity of the hot plate. Is the material metallic, non-metallic, or gas/liquid?
How does the conduction of heat occur in a solid material, and what factors influence the rate of heat transfer through conduction?
An experiment is undertaken to determine the thermal conductivity of an unknown material. The material is 5 cm thick and has a diameter of 15 cm. It is placed on a hot plate of equal diameter where the surfaces temperature is maintain at 60oC. The outer surface temperature is 24oC, and the power used by the hot plate is 45 W. Determine the thermal conductivity of material.
The wall of a house is 4-meter-high and 15 -meter- wide. The wall is constructed with a 9-cm thick outer layer of brick and a 5-cm inner layer of insulating material. On a cold day, the outer surface temperature of the wall is -5°C while the inner surface temperature is 24°C. The thermal conductivity of the brick is 0.80 W/m-K, while the thermal conductivity of the insulation is 0.03 W/m-K . both inner and outer and outer has transfeer coefficeint of 20 W/m2- K a. What is the total thermal resistance of the wal? b. What is the rate of heat loss through the wal
A 3-mm-diameter and 5-m-long electric wire is tightly wrapped with a 2-mm thick plastic cover whose thermal conductivity is k = 0.15 W/m·K. Electrical measurements indicate that a current of 10 A passes through the wire and there is a voltage drop of 8 V along the wire. If the insulated wire is exposed to a medium at 30 deg C with a heat transfer coefficient of h=12 W / m ^2-C. determine the temperature at the interface of the wire and the critical radius
How does a fin enhance heat transfer at a surface?