Determine the hydraulic diameter and hydraulic radius for the open trapezoidal channel shown using the definition. Given that b = 4.1, T= 7.0, and h = 2.1 (all dimensions measured in ft). If the flow rate is Q = 30.0 cfs, identify the flow in the channel to be subcritical, critical or supercritical and find the alternative depth if it is not critical. Solution: 1. Side slope m = 2. Flow area A = 3. Wetted perimeter Pw= 4. Hydraulic radius Rh = 5. Hydraulic depth Dh= ft; ft; ft;

Determine the hydraulic diameter and hydraulic radius for the open trapezoidal channel shown using the definition. Given that b = 4.1, T= 7.0, and h = 2.1 (all dimensions measured in ft). If the flow rate is Q = 30.0 cfs, identify the flow in the channel to be subcritical, critical or supercritical and find the alternative depth if it is not critical. Solution: 1. Side slope m = 2. Flow area A = 3. Wetted perimeter Pw= 4. Hydraulic radius Rh = 5. Hydraulic depth Dh= ft; ft; ft;

Name: Fluid Mechanics HwPlease label all answers Determine the hydraulic dia
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Fluid Mechanics HwPlease label all answers Determine the hydraulic diameter and hydraulic radius for the opentrapezoidal channel shown using the definition. Given that b = 4.1, T= 7.0,and h = 2.1 (all dimensions measured in ft). If the flow rate is Q

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water at 20°C flows in a partially full 4-m-diameter circular channel at an average velocity of 2 m/s. If the maximum water depth is 1 m, determine the hydraulic radius, the Reynolds number, and the flow regime.
A rectangular channel has a width of 3 m. If the discharge flowing in the canal is 2.1 m^3/s and coefficient of roughness n = 0.015, compute the critical slope.
The painted-steel channel of Fig. is designed, withoutthe barrier, for a flow rate of 6 m3/s at a normal depth of1 m. Determine (a) the design slope of the channel and(b) the reduction in total flow rate if the proposed painted steelcentral barrier is installed.
In flowing from section (1) to section (2) along a rectangular open channel, the water depth decreases by a factor of three and the Froude number changes from a subcritical value of 0.7 to a supercritical value of 3.4. Determine the channel width at (2) if it is 8 ft. wide at section (1). Assume stead-state flow.
Draw and label a hydraulic jump (in a channel of constant width). (a) Indicate regions of supercritical and subcritical flow. (b) What happens to Bernoulli’s constant through the jump? (c) Write down the relationship between the ratio of upstream and downstream water depths, and the upstream Froude number. (d) Derive a relationship between the ratio of upstream and downstream water depths, and the downstream Froude number. (e) A surge is moving at 5 m/s into an estuary of depth 1 m where the water is moving out to sea at 1 m/s. Find the water depth behind the surge.
Water at 65°F flows at a depth of 1.4 ft with an average velocity of 10 ft/s in a wide rectangular channel. Determine (a) the Froude number, (b) the critical depth, and (c) whether the flow is subcritical or supercritical. What would your response be if the flow depth were 0.2 ft
A trapezoidal channel having a bottom slope of 0.001 is carrying a flow of 30 m/s. The bottom width is 10.0 m and the side slopes are 2H to 1V. A control structure is built at the downstream end which raises the water depth at the downstream end to 5.0 m. Compute the water surface profile till 1.20 m. Manning n is 0.013 and a = 1. Select an appropriate Month for your calculations. Please read the question carefully and provide the correct solution with simple steps fast. Please answer quickly.
Which is the best hydraulic cross section for an open channel: (a) circular, (b) rectangular, (c) trapezoidal, or (d) triangular?
At what depth will water flow in a 4m wide rectangular channel if n= 0.018, S0 = 0.0009 and Q = 7m3/s.
A 3ft-diameter semicircular channel have a flow rate of 90 ft3 /s when the channel is full, determine the Hydraulic Radius.
A half-full circular open channel is shown below. The diameter of the channel is D=2 m. (3) Calculate the hydraulic radius (R) ______m (one decimal place)
A rectangular channel with a bottom width of 7 m discharges water at a rate of 45 m3/s. Determine the flow depth below which the flow is supercritical.