Determine the pressure at a point 10 m below the free surface in a fluid that has a variable density in kilograms per cubic meter given the density equal to 450+ ah, in which a = 12kg/m^4 and h is the distance in meter measured from the free surface.

Determine the pressure at a point 10 m below the free surface in a fluid that has a variable density in kilograms per cubic meter given the density equal to 450+ ah, in which a = 12kg/m^4 and h is the distance in meter measured from the free surface.

Name: Determine the pressure at a point 10 m below the free surface in a flu
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Determine the pressure at a point 10 m below the free surface in a fluid that has a variable density in kilograms per cubic meter given the density equal to 450+ ah, in which a = 12kg/m^4 and h is the distance in meter measured from the free surface.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate and the smooth surface at B due to water pressure acting on the gate. Use =62.4lb/ft3 for water.
The gage pressure of the air in the tank shown is measured to be 50 kPa. Determine the differential height h of the mercury column
Determine the absolute pressure exerted by the seawater in kPa on the body of the diver if he descends 128.44 m to a sunken ship. Assume that the density of 1,025.465 kg/m3 and the barometric pressure is 101.725 kPa.
The initial pressures at A and B are the same at 103 kPa. If the pressure at the liquid at A (SG1 = 1.25) is increased to 148 kPa while keeping the pressure at B constant, determine the new position (Δh, in mm.) of the mercury meniscus inside the tube as shown. Assume no change in the liquid densities. The connecting tube is a 1-cm in diameter, Y1 = 0.51 cm, and the inclination of the tube is 18 degrees with respect to the horizontal. Assume unit weight of air to be negligible.
Determine the pressure in psi at a depth of 5 meters below the free surface of a body of water
The gage pressure of the air in the tank shown in Fig. is measured to be 80 kPa. Determine the differential height h of the mercury column.
Both a gage and a manometer are attached to a gas tank to measure its pressure. If the reading on the pressure gage is 100 kPa, determine the distance between the two fluid levels of the manometer if the fluid is
The pressure at a point in the seawater is 100 kPa, determine the pressure in kPa 33.43 meters below this point?
An open tank 5m long, 2m deep and 3 m wide contains oil of relative density 0.9 to a depth of 0.9 m. If the tank is accelerated along its length on a horizontal track at a constant value of 3 m/s2 , determine: (i) The new positon of the oil surface. (ii) The pressures at the bottom of the tank at the front and rear edges. (iii) The amount of spill if the tank is given a horizontal acceleration of 4.5 m/s2 instead of 3 m/s2 .
The pressure at a point in the seawater is 68kpa, determine the pressure in kpa 26.87 meters below this point?
Determine the pressure of the water in Pipe A if the gage pressure of the air in the tank is 2 psi. (Hydrostatic)
A vertical hydraulic cylinder has a piston with a diameter of 115 mm.If the ambient pressure is 100 kPa,determine the mass of the piston if the pressure inside is 950 kPa.