Please I need the answer as soon as possible please UTMS of the system.Q2UBased on the relationship between the line and phase value of currents and voltage,show that the active power input to a three-phase balance load is v3Vlcoso, where Vand I are line quantities.b) A balanced Y-connected load has phase voltage of 230 V and positive phase sequence.The impedances Zs, ZB, and Zc are 10230° N, respectively.OUTMphase voltages. 6By taking VAB on the load side as a reference, determine all the line currents andJITM(ii)Determine total real power, P, total reactive power, Q and total apparent power,UTM(iii) Total real powerof the loads can be measured using twoDraw thecoils are in line AWhat is the total realProve and compare the value with Q2(b)(ii).measured by each wattmeter?

Answered: Image /qna-images/answer/f2de7e18-9fc8-41b8-bbc4-39e2df0170e0.jpg

Determine total real power, P, total reactive powM (a) Based on the relationship between the line and phase value of currents and voltage, show that the active power input to a three-phase balance load is v3VIcoso, where V and / are line quantities. b) A balanced Y-connected load has phase voltage of 230 V and positive phase sequence. The impedances Zı, Z6, and Zc are 10430° N, respectively. (UTM By taking VAB on the load side as a reference, determine all the line currents and ITM phase voltages. (ii) Q and total apparent power, S of the system.

Determine total real power, P, total reactive powM (a) Based on the relationship between the line and phase value of currents and voltage, show that the active power input to a three-phase balance load is v3VIcoso, where V and / are line quantities. b) A balanced Y-connected load has phase voltage of 230 V and positive phase sequence. The impedances Zı, Z6, and Zc are 10430° N, respectively. (UTM By taking VAB on the load side as a reference, determine all the line currents and ITM phase voltages. (ii) Q and total apparent power, S of the system.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter8: Symmetrical Components

Section: Chapter Questions

Problem 8.46P

See similar textbooks

Similar questions

Let a series RLC network be connected to a source voltage V, drawing a current I. (a) In terms of the load impedance Z=ZZ, find expressions for P and Q, from complex power considerations. (b) Express p(t) in terms of P and Q, by choosing i(t)=2Icost. (c) For the case of Z=R+jL+1/jC, interpret the result of part (b) in terms of P,QL, and Qc. In particular, if 2LC=1, when the inductive and capacitive reactances cancel, comment on what happens.
A three-phase line, which has an impedance of (2+j4) per phase, feeds two balanced three-phase loads that are connected in parallel. One of the loads is Y-connected with an impedance of (30+j40) per phase, and the other is -connected with an impedance of (60j45) per phase. The line is energized at the sending end from a 60-Hz, three-phase, balanced voltage source of 1203V (rms. line-to-line). Determine (a) the current, real power. and reactive power delivered by the sending-end source: (b) the line-to-line voltage at the load: (C) the current per phase in each load: and (d) the total three-phase real and reactive powers absorbed by each load and by the line. Check that the total three- phase complex power delivered by the source equals the total three-phase power absorbed by the line and loads.
A balanced 3-phase Y-connected source has using positive phase sequence, ?an = 390∠30˚ ?. Find the complex expression of voltage Eab. Circuits Problem 1
NOTE :( Just solve only for the Symmetrical components of the corresponding phase voltage) Given the symmetrical components to be V0 = 10<0 V , V1 = 80<30 V , V2 = 40<-30 V determine the unbalanced phase voltages Va, Vb, and Vc.(b) Using the results of part (a), calculate the line-to-line voltages Vab, Vbc, and Vca. Then determine the symmetrical components of these line-to-line voltages, the symmetrical components of the corresponding phase voltages, and the phase voltages.
Given the symmetrical components to be V0 = 10<0 V , V1 = 80<30 V , V2 = 40<-30 V determine the unbalanced phase voltages Va, Vb, and Vc.(b) Using the results of part (a), calculate the line-to-line voltages Vab, Vbc, and Vca. Then determine the symmetrical components of these line-to-line voltages, the symmetrical components of the corresponding phase voltages, and the phase voltages.
A balanced 3-phase Y-connected source has using positive phase sequence, ?an = 390∠30˚ ?. Find the complex expression of voltage Eab.
The IAC current of a balanced three-phase delta connected load is known as 10 Amps (-10 degrees) and the VAB voltage as 20 Volts (10 degrees). Accordingly, calculate the following expressions by considering the positive phase sequence. A) IAB=? B)load impedance=? C)IBC=?
A balanced, star connected three-phase system is directly connected to an unbalanced load, with a solid neutral connection. The line-to-neutral voltage Van on the load side and per phase load impedances (i.e., Za, Zb and Zc) are as below: ?an = 240∠0 ? ?? = 10 + 3? Ω ?? = 16 + 3? Ω ?? = 10 + 3?Ω Draw the circuit diagram and calculate the sequence currents and neutral current
Type your question here Explain the terms, connected load, load factor, plant use factor, diversity factor.
circuits A balanced 3-phase Y-connected source has using positive phase sequence, ?an = 390∠30˚ ?. Find the complex expression of voltage Eab.
Find the equivalent resistance per phase for the following three-phase load-balanced arrangements, express your responses as a function of the impedances, ?1, ?2, ??1 and ??1. Remember to add j and –j to the reactances, as appropriate.
Using a test equipment, Vmax was found to be 5V while Vmin is 1V. The distance between voltage maximas is 14 cm and the first maximum was found to be 7 cm from the load. What is the load impedance if the characteristic impedance of the line is 75 ohms?