The thrust of a shaft is taken by a collar bearing provided with a forcedThe lubrication system maintains a film of oil oflubrication system.orm thickness between the surface of the collar and the bearing Themal and intemal diameters of collar are 16 and 12 cms. respectively.The thickness of oil film is 0.02 ems. and coefficient of viscosity is 0.91naise. Find the horse-power lost in overcoming friction: when the shaft isnotated at a speed of 350 E.p.m.Skult

Answered: Image /qna-images/answer/07df51a9-06b0-477b-b72e-bd030def5459.jpg

E thrust of a shaft is taken by a collar bearing provided with a forced cation system. The lubrication system maintains a film of oil of om thickness between the surface of the collar and the bearing The temal and intemal diameters of collar are 16 and 12 cms. respectively. The thickness of oil film is 0.02 ems. and coefficient of viscosity is 0.91 naise. Find the horse-power lost in overcoming friction when the shaft is uted at a speed of 350 rp.m. Shalt. D 12cm

E thrust of a shaft is taken by a collar bearing provided with a forced cation system. The lubrication system maintains a film of oil of om thickness between the surface of the collar and the bearing The temal and intemal diameters of collar are 16 and 12 cms. respectively. The thickness of oil film is 0.02 ems. and coefficient of viscosity is 0.91 naise. Find the horse-power lost in overcoming friction when the shaft is uted at a speed of 350 rp.m. Shalt. D 12cm

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

I've been struggling about this problem. How can I get the fluid velocity from the Reynolds numbers. That is the required value for Re. If, the given values are Water Density = 10000 kg/m3, Diameter of tube = 0.05m and Dynamic Viscosity = 0.001 Pa-s. If the formula is Re = Vρd/μ.
It is desired to determine the surface tension of a particular fluid using a capillary-riseexperiment. Kienth used a 0.5 mm glass tube and found that the height of the liquidmeasured 30 mm with a contact angle of 30°. Kienth then performed viscosity measurements using an Ostwald viscometer. He found that the fluid takes 1.5 times slowerto flow through the viscometer relative to water with a density of 1000 kg/m? and aviscosity of 1.0 cP. It is previously known that the viscosity of the fluid is 1.35 cP. Whatis the surface tension of the liquid?
A pipe that has a diameter of 75 mm and a length of 90 m transports oil of density 850 kg/m3 and a kinematic viscosity of 0.0033 m²/s at a rate of 40 tons/hour. Prove that the flow is laminar and find the power absorbed in overcoming friction in the pipe.
A shaft 70-mm in diameter is being pushed at a speed of 400mm/s through a bearing sleeve 70.2-mm in diameter and 250mm long. The clearance is filled with oil with a kinematic viscosity of v = 0.005 ?2/? and SG=0.9. Find the frictional resistance exerted by the oil on the shaft in Newtons (N). And when the shaft is fixed axially and rotated inside the sleeve at 2000 rpm, determine the resisting torque exerted by the oil and the power required to rotate the shaft in kiloWatts (kW).
plzzzz help me with this one plzzz Water (viscosity of 0.001 kg/m.s and density of 1000 kg/m3 ) is to be pumped through 50 m of pipe from lower reservoir to a higher reservoir at a rate of 0.2 m3/s. If the pipe is cast iron of diameter 12 cm and the pump efficient is =0.44%, the major head loss inside the pipe is ¼ of the velocity head what horsepower pump is needed? Hint: consider the abrupt expansion only as a minor loss.
Determine the surface tension in a tube with 0.3m radius and wetting angle 80 and capillary rise of 4.5mm in N/m and in lb/ft.
Cooling water having a density and viscosity of 998 kg/m3 and 0.95 cP isflowing thru a 25-mm med. wt. steel pipe (I.D. = 0.0272 m). The pipeline isequipped with an orifice meter of 10 mm I.D and a U-tube mercurymanometer. If the manometer shows 30 cm reading, calculate thevolumetric flow rate of water in liters per minute.
Oil (with kinematic viscosity ν = 4x10-5 m2/s and specification SG= 0.9) flows from the upper reservoir to the lower one, with a flow rate of 0.028 m3/s in a smooth copper tube with a diameter of 15 cm, what is the elevation of the oil surface in the upper reservoir?
A Pitot tube in a pipe in which air is flowing is connected to a manometer containing water asshown below. If the difference in water levels in the manometer is 10 cm, what is the velocity of flow in the pipe? Assume a tube coefficient of Cp = 0.99, specific weight of air is 12 N/ sq.m.
A pump discharges 8000 liters per minute of a certain brine solution (SG=1.20) to an evaporating pond. The intake line is 25cm in diameter and is at the same level as the pump discharge line, which is 15cm in diameter. The pressure at the inlet of the pump is -170mm of mercury. The pressure gage connected to the pipe discharge reads 150 kPa, and its center is 2.0mabove the center of the discharge flange. The vapor pressure of the brine solution is 40mm of Hg. If the pump efficiency is 80%. How much power is required?
A gas tanker carries fuel oil having density of 900kg/m3 and viscosity of 0.05kg/ms as shown in the figure. Thecapacity of the tanker is 20m3 and filling time is 40 minute. Please calculate the required input power of the pump tofill the empty tanker at the beginning of filling process. Note that total irriversible head loss is 2m and the efficiencyof the over-all pump is 82%. Please discuss the amount of required power during the filling process
The clutch system shown in Fig is used to transmit torque through a 2-mm-thick oil film with ? = 0.38 N⋅s/m2 between two identical 30-cm-diameter disks. When the driving shaft rotates at a speed of 1200 rpm, the driven shaft is observed to rotate at 1125 rpm. Using appropriate software, investigate the effect of oil film thickness on the torque transmitted. Let the film thickness vary from 0.1 mm to 10 mm. Plot your results, and state your conclusions.