Solved Example in Normal StressOHExample 101: A hollow steel tube with an insideDiameter of 100 mm must cary a tensile load of 400 kN.100Determine the outside diameter of the tube if the stressis limited to 120 MN/m?.Solution 101:P =o AP = 0AP = 400 kN

Answered: Image /qna-images/answer/bc360d45-a40f-4298-b418-9a9c9abce1ae.jpg

Example 101: A hollow steel tube with an inside Diameter of 100 mm must carnry a tensile load of 400 kN. 100 Determine the outside diameter of the tube if the stress is limited to 120 MN/m². Solution 101: P =o A P = 0A P= 400 kN

Example 101: A hollow steel tube with an inside Diameter of 100 mm must carnry a tensile load of 400 kN. 100 Determine the outside diameter of the tube if the stress is limited to 120 MN/m². Solution 101: P =o A P = 0A P= 400 kN

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter1: Tension, Compression, And Shear

Section: Chapter Questions

Problem 1.10.11P: A pressurized circular cylinder has a sealed cover plate fastened with steel bolts (see figure). The...

See similar textbooks

Related questions

Q: Ql; A bar ABCD shown in Figure (1) below consists of three sections: AB is of 42 mm diameter and 80…

Q: Q2: Steel railroad reels 10 m long are laid with a clearance of 3 mm at a temperature of 15°C. At…

Q: n the figure shown, the cutaway view shows a solid aluminum alloy of L= 600mm, A= 707mm^2 and E=…

Q: Three equidistant vertical rods, each of 20 mm diameter, support a load of 25 kN in the same plane…

A: Given details:Es=205GPaEc=100GPadiameter of rod = 20mm

Q: The rectangular bar shown is connected to a support bracket with a 27 mm diameter pin. The width of…

Q: A steel rod is stretched between two rigid walls and carries a tensile load of 5000 N at 20°C. If…

A: Given: The tensile load on the steel rod is P=5000 N. The initial temperature of the rod is…

Q: The rectangular bar shown is connected to a support bracket with a 24 mm diameter pin. The width of…

A: Given Data The diameter of pin is:d=24mm=24×10-3 m The width of the rectangular bar is:b=70…

Q: Example (13) A load of 300kN is supported by a short concrete column of size 250mm square. The…

Q: A circular tube AB is fixed at one end and free at the other end. The tubeis subjected to axialforce…

A: In this question, we determine the maximum normal stress Maximum normal stress, σ=PA here, P is…

Q: Find the maximum stress induced in the following cases taking stress concentration into account: 1.…

Q: The box beam shown in Figure P8.63b has dimensions of b = 80 mm, d = 120 mm, and t = 8 mm. A…

A: Given: The dimension, b = 80 mm The dimension, d – 120 mm The dimension, t = 8 mm The force, F = 42…

Q: Problem Solving: Show your Solution 1. A sculpture weighing 10,000 N rests on a horizontal surface…

A: 1) Weight of sculpture =10000 N h=6 m A=0.20 m2 density =2700 kg/m3 length of segment =3 m

Q: A polymer cylinder (2) is clamped between rigid heads by two steel bolts (1). The steel [E = 29,000…

A: For steel,αs=6.5×10-6 /°F,Es=29000 ksi,For polymer,αp=37.2×10-6 /°F,Ep=350 ksi,Outside diameter of…

Q: The structure shown in Figure 3.1 consists of bar BD and two rods, AD and CD. Assuming that the…

A: Draw the given diagram showing the axes and specifying B as the origin. From the figure, taking B…

Q: Example 1.6 Around bar as shown in Fig-1- is subjected to an axial tensile load Of 100KN . what must…

Q: Example 101: A hollow steel tube with an inside Diameter of 100 mm must camy a tensile load of 400…

A: Given data Inside diameter (di) = 100 mm Tensile load (P) = 400 KN Allowable stress = 120 MN/m2

Q: Problem 1 An angle bracket ABC is restrained by a high strength steel wire CD, and it supports a…

A: Free body diagram: Equillibrium of Frame ABC:∑MB=0-(1 KN)(cos15)(100)+Tw*90=0Tw=1.0733…

Q: 1. Problem 1: Segment AB of the bar is a hollow tube with an outer diameter of 1.5 inches and a wall…

Q: Problem no. 1 A rectangular post which is made up of two blocks of wood glued together along a joint…

A: Given: The shear and normal stresses in glue are 21755.7 psi and 17404.5 psi respectively. Axial…

Q: Problem 4 A thin-walled cylindrical pressure vessel has an internal diameter of d = 2 m and a wall…

Q: answer as soon as possible

A: The eccentric load is acting on the cube. Due to this, there will two types of stress generated…

Q: Figure 101 в 2m 1.5r. A 2.5m The members of the truss are 25mmx50mm in cross section. Determine the…

A: According to Lamis Theorem, whenever at a point three forces are acting then the ratio of force upon…

Q: Help me please I dont understand this problem A hollow circular post ABC (see figure) supports a…

A: Given Load P1 = 1700 lb To find Normal stress of AB Magnitude of P2 Thickness

Q: A cantilever beam, 100 mm wide by 230 mm high and 7 m long, carries a load that varies uniformly…

A: Due to bending in a beam , there are two types of stresses acting in a beam which are- 1. Bending…

Q: Situation 11: As shown in the Figure, three steel wires, each 0.05in? in area, are used to lift a…

Q: Problem #3. The figure below are cables ( circular section) supporting a 36 kN. Find the axial…

Q: Problem 2.19 Rigid bar ABCD is initially horizontal before the load W is applied and a change of…

Q: Figure 1 shows a rigid pipe being supported by a pin at A and a steel wire BD. The BD wire has a…

A: Permissible stress is stress which produces due to pressure or forces which does not exceed the…

Q: Example 18.1. A short C.I. column of hollow circular section is attached with a projection bracket…

Q: Question 3 A Sign is supported by a pole of hollow circular cross section as shown in Figure Q3 The…

A: Calculate the force due to wind.

Q: Problem 1 An angle bracket ABC is restrained by a high strength steel wire CD, and it supports a…

Q: PROBLEM 3 Steel: A = 500 mm ,= 120 MPa 1.8 Find the maximum allowable value of P for the column. The…

A: The normal stress developed inside a member when acted upon by an axial force ca be calculated using…

Q: A tensile load of 6 kN at 25 C was applied to a steel rod stretching between two rigid walls as…

A: Note:As per our guidelines we are supposed to answer only one question. Kindly repost other…

Q: A steel column of hollow circular with length, L is shown in Figure 2. The column cross section has…

Q: QUESTION 3: Square profile made of hollow 1045 steel, with a length of 6 meters with a…

A: Given data: Cross-section of Square hollow profile of steel pipe is drawn below. Cross-sectional…

Q: Q2: The pin-connected structure shown in Figure consists of a rigid bar ABCD and two axial members.…

Q: Example 1.6 Around bar as shown in Fig-1- is subjected to an axial tensile load Of 100KN. what must…

Q: Problem 907 Determine the largest load P that can be supported by the circular steel bracket shown…

A: Given data :- diameter of section A-B = 100 mm normal stress = 80 Mpa find the largest load P that…

Q: A tensile load of 6 kN at 25 C was applied to a steel rod stretching between two rigid walls as…

A: Given: F= 6 kN T=25°Cα=12.2 μm/(m°C)E=200 GPaσ=150 MPa

Q: The rectangular bar shown is connected to a support bracket with a 24 mm diameter pin. The width of…

Q: P1.13 (WP) A horizontal load P is applied to an assembly consisting of two inclined bars, as shown…

Q: A steel rod is stretched between two walls. At 20C, the tensile force in the rod is 5000N. If the…

Q: Q3. A cylindrical shell with 15 mm wall thickness is subjected to an internal pressure of 25 MPa.…

A: Given Data The thickness of the cylindrical shell is: t=15 mm The internal pressure acting on the…

Q: Question: Consider that the fit between the elements shown in the Figure below is H6/s5. They are…

A: given data

Q: Problem 1A steel wire is 6 m long,, hanging vertically supports a load of 2000N. Neglecting the…

Q: PROBLEM 2. The carrier system in the figure consists of the AB rigid beam and two aluminum bars and…

A: Data given- Steel A- 36 A = 160 mm2 T2 = 80°C T1 = 20°C 2014- T6 Al A = 200 mm2

Q: A cantilever beam, 80 mm wide by 220 mm high and 8 m long, carries a load that varies uniformly from…

A: Find the normal stress in a fiber 70 mm from the top of the beam at a section 5 m from the free end.

Q: Compare the torsional rigidities of the following sections: (a) a hollow tube 30 mm outside…

A: Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…

Concept explainers

Pressure Vessels

The term pressure vessel refers to a closed container that contains gas or liquid at a different pressure than environment pressure. The pressure vessels have a wide scale of applications in our day-to-day lives and other industrial places. Some common examples of pressure vessels are gas cylinders, autoclaves, compressor vessels, etc.

Question

Solved Example in Normal Stress
OH
Example 101: A hollow steel tube with an inside
Diameter of 100 mm must cary a tensile load of 400 kN.
100
Determine the outside diameter of the tube if the stress
is limited to 120 MN/m?.
Solution 101:
P =o A
P = 0A
P = 400 kN

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The hollow drill pipe for an oil well (sec figure) is 6,2 in. in outer diameter and 0.75 in. in thickness. Just above the bit, the compressive force in the pipe (due to the weight of the pipe) is 62 kips and the torque (due to drilling) is 185 kip-in. Determine the maximum tensile, compressive, and shear stresses in the drill pipe.
A fire extinguisher tank is designed for an internal pressure of 825 psi. The tank has an outer diameter of 4.5 in. and thickness of O.OS in. Calculate the longitudinal stress, the circumferential stress, and the maximum shear stresses (out-of-plane and in-plane) at the outer surface of the tank.
A hollow, circular, cast-iron pipe (Ec =12,000 ksi) supports a brass rod (Ec= 14,000 ksi} and weight W — 2 kips, as shown. The outside diameter of the pipe is dc= 6 in. (a) If the allowable compressive stress in the pipe is S00O psi and the allowable shortening of the pipe is 0.02 in., what is the minimum required wall thickness trmm? (Include the weights of the rod and steel cap in your calculations.) (b) What is the elongation of the brass rod Srdue to both load Wand its own weight? (c) What is the minimum required clearance h?
A short column constructed of a W 12 × 35 wide-flange shape is subjected to a resultant compressive load P = 25 k having its line of action at the midpoint of one flange (see figure). Determine the maximum tensile and compressive stresses d1and d2., respectively, in the column. Locate the neutral axis under this loading condition. Recompute maximum tensile and compressive stresses if a C 10 × 15.3 is attached to one flange, as shown.
Repeat the previous problem using ? = 50° and stresses on the rotated element: sy1= 70 MPa, ??y1=-82 MPa, and tx1y1=-35 MPa.
A circular copper bar with diameter d = 3 in. is subjected to torques T = 30 kip-in. at its ends. Find i lie maximum shear, ion si le. and compressive stresses in the tube and their corresponding strains. Assume that G = 6000 ksi.
An elevated jogging track is supported at intervals by a wood beam AB (L = 7.5 ft) that is pinned at A and supported by steel rod BC and a steel washer at B. Both the rod (dBC= 3/16 in.) and the washer (dB= 1.0 in.) were designed using a rod tension force of TBC=415 lb. The rod was sized using a factor of safely of 3 against reaching the ultimate stress tru— 60 ksi. An allowable bearing stress sba= 565 psi was used to size the washer at B. A small platform HF is suspended below a section of the elevated track to support some mechanical and electrical equipment. The equipment load is uniform load q = 50 lb/ft and concentrated load WE= 175 lb at mid-span of beam HF. The plan is to drill a hole through beam ABaX £land install the same rod (dBC) and washer) dB) at both D and F to support beam HF. (a) Use s and to check the proposed design for rod DF and washer d,: are they acceptable? (b) Re-check the normal tensile stress in rod BC and bearing stress at 8 if either is inadequate under the additional load from platform HF. Re-design them to meet the original design criteria.
A steel bar has a square cross section of width b = 2.0 in. (sec figure). The bar has pinned supports at the ends and is 3.0 ft long. The axial forces acting at the end of the bar have a resultant P = 20 kips located at distance e = 0,75 in, from the center of the cross section. Also, the modulus of elasticity of the steel is 29,000 ksi. Determine the maximum compressive stress max, in the bar. If the allowable stress in the steel is 18,000 psi, what is the maximum permissible length Lmaxof the bar?
An aluminum tube is required to transmit an axial tensile force P = 33 k (sec figure part a). The thickness of the wall of the tube is 0.25 in. (a) What is the minimum required outer diameter d minif the allowable tensile stress is 12.000 psi? (b) Repeat part (a) if the tube has a hole of a diameter J/10 at mid-length (see figure parts b and C).
An aluminum pole for a street light weighs 4600 N and supports an arm that weighs 660 N (see figure). The center of gravity of the arm is 1.2 m from the axis of the pole, A wind force of 300 N also acts in the (y) direction at 9 m above the base. The outside diameter of the pole (at its base) is 225 mm, and its thickness is 18 mm. Determine the maximum tensile and compressive stresses o, and e1., respectively, in the pole (at its base) due to the weights and the wind force.
A metal bar AB of a weight Ills suspended by a system of steel wires arranged as shown in the figure. The diameter of the wires is 5/64 in., and the yield stress of the steel is 65 ksi. Determine the maximum permissible weight W max for a factor of safety of 1.9 with respect to yielding.
A tie-down on the deck of a sailboat consists of a bent bar boiled at both ends, as shown in the figure. The diameter dBof the bar is 1/4 in., the diameter D Wof the washers is 7/8 in., and the thickness is of the fiberglass deck is 3/8 in. If the allowable shear stress in the fiberglass is 300 psi, and the allowable bearing pressure between the washer and the fiberglass is 550 psi, what is the allowable load P allowon the tie-down?