Example 29.13 (a). Find the load and full-load speeds for a four-pole, 220-V, and 20-kW, shunt motor having the following data : Field-current = 5 amp, armature resistance = 0.04 ohm, Flux per pole = 0.04 Wb, number of armature-conductors = 160, Two-circuit wave-connection, full load current = 95 amp, No load current =9 A. Neglect armature reaction.

Example 29.13 (a). Find the load and full-load speeds for a four-pole, 220-V, and 20-kW, shunt motor having the following data : Field-current = 5 amp, armature resistance = 0.04 ohm, Flux per pole = 0.04 Wb, number of armature-conductors = 160, Two-circuit wave-connection, full load current = 95 amp, No load current =9 A. Neglect armature reaction.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter12: Power System Controls

Section: Chapter Questions

Problem 12.4P

See similar textbooks

Similar questions

An 8-Pole, simplex lap wound, shunt generator has 800conductors and a flux per pole of 0.025Wb and running at 1200rpm. The armature and shunt field resistances are 0.25Ω and 120Ω respectively. If the armature voltage drop is equal to 10V, what is the load current (in Amp)? use two decimal places if the answer is not exact and do not include the unit anymore.
A Y- connected, 10-KVA, 230- has a field winding resistance of 4.59. At an operation of 0.85 lagging power factor, the excitation current is recorded at 10A. the core loss is 300W, and the mechanical loss is 200W. If the corresponding efficiency is 84.9%. calculate the per- phase armature winding resistance.
A long-shunt compound generator supplies 50 kW at 230 V. the total field- and armature circuit resistances are 46 ohms and 0.03 ohms , respectively. The brush-contact drop is 2 V. Determine the percent voltage regulation. Neglect the armature reaction.
A 2 pole wave wound dc shunt generator runs at a speed of 750 rpm, has an armature and shunt field resistance of 0.4 and 580 respectively. The armature has 960 conductors and flux per pole is 0.115 Weber. If the lamp load connected has a resistance of 70 determine (i) Generated EMF, (ii) Total Resistance, (iii) Armature Current, (iv) Terminal Voltage.
2) the armature windings of a 12-pole DC machine are composed of 72 coils with 10 windings, and the windings are 5the layered wave is yellowish. The Rotor speed is 1000 rpm and the flux value per pole is 25mWb.Resistance of Armature windings, commutation windings and compensation windings is 70mΩ, 10mΩ and5mω. (a) the number of current paths in the machine, (b) the total number of conductors in Armature windings, (c) armature coefficient (constant)
What is the fundamental requirements of protective relay?
A 240V shunt motor, running on no-load and at normal speed, takes an armature current of 2.4 A froma 240Vsupply. The resistance of the field circuit is 240Ω, and that of the armature is 0.25Ω. Calculatethe motor output power and efficiency when drawing a line current of 35 A from the supply
A long Shunt Compound Generator delivers a load current of 20A at 200V and has armature, series field and shunt field resistances of 0.04 Ώ,0.2 Ώ and 250 Ώ respectively. Calculate the generated Voltage and the armature current. Allow 1v per brush for contact drop.
22 The DC voltage is generated in the Armature winding of DC Generator. Select one: True False
A six-pole, lap-wound, 220 V, shunt-excited d.c. machine takes an armature current of 2.5 A when unloaded at 950 r/min. When loaded, it takes an armature current of 54 A from the supply and runs at 950 r/min. The resistance of the armature circuit is 0.18 Ω and there are 1044 armature conductors. For the loaded condition, calculate: i. the induced e.m.f. ii. the useful flux per pole. iii. the torque developed by the machine in Nm. b) Use the information provided in Part (a) above to determine: i. The constant loss, C (ANS: 548.875 W) ii. The output power when the machine is loaded. (ANS: 10,806.245 W) iii. The output torque when the machine is loaded. (ANS: 108.623 N) Hint: Draw the power flow diagram.
A 2 pole wave wound dc shunt generator runs at a speed of 750 rpm, has an armature and shunt field resistance of 0.9 Q and 280 Q respectively. The armature has 880 conductors and flux per pole is 0.115 Weber. If the lamp load connected has a resistance of 30 Q, determine (i) Generated EMF, (ii) Total Resistance, (iii) Armature Current, (iv) Terminal Voltage.
8.) A 25-kW shunt generator is delivering full output to 400-V bus-bars and is driven at 950 r.p.m. by belt drive. The belt breaks suddenly but the machine continues to run as a motor taking 25 kW from the busbars. At what speed does it run ? Take armature resistance including brush contact resistance as 0.5 Ω and field resistance as 160 Ω.