Example 4: In the mechanism shown, the crank OA rotates at 20 r.p.m. anticlockwise and gives motion to the sliding blocks B and D. The dimensions of the links are OA = 300 mm; AB = 1200 mm; BC = 450 mm and CD = 450 mm. For the given configuration, compute: 1. Velocities of sliding at B and D, 2. The angular velocity of CD, 3. The linear acceleration of D, and 4. The angular acceleration of the link CD. 1050 mm

Example 4: In the mechanism shown, the crank OA rotates at 20 r.p.m. anticlockwise and gives motion to the sliding blocks B and D. The dimensions of the links are OA = 300 mm; AB = 1200 mm; BC = 450 mm and CD = 450 mm. For the given configuration, compute: 1. Velocities of sliding at B and D, 2. The angular velocity of CD, 3. The linear acceleration of D, and 4. The angular acceleration of the link CD. 1050 mm

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

For the mechanisms below, determine the number of instantaneous centers of rotation.
Q#03 : In a four-bar chain ABCD, Link AD is fixed and is 160 mm long. The crank AB is 40 mm long and rotates at 150+25 rpm clockwise. While Link CD is 70mm long and oscillates about point D. BC and AD are of equal length, angle BAD=60°. Find the angular velocity of Link CD? (Subject : mechanics of machines)
The wheel in the figure below rolls without slipping with the constant clockwise angular velocityω0=1.6rad/s. Calculate the angular velocity of bar AB and the velocity of the slider B when themechanism is in the position shown. Use the Instantaneous center of velocity for velocities.
In a four-bar chain ABCD, Link AD is fixed and is 160 mm long. The crank AB is 40 mm long and rotates at 150+1r.p.m clockwise. While Link CD is 70mm long and oscillates about point D. BC and AD are of equal length, angle BAD=60°. Find the angular velocity of Link CD?
Figure shown represents a schematic diagram of a Porter governor. Each fly ball weighs 16.1 lb and the central weight D is 40 lb. Determine the rotational speed in rpm about the vertical axis AD at which the weight D begins to rise.
Consider the slider-crank mechanism shown. Crank AB is 0.500 m long and is rotating counterclockwise at 3.00 rad/s. Rod BD is 1.500 m long. 1. Which of the following gives the closest value of the speed of end B of crank AB? 2. If crank AB is rotating at a constant angular velocity, which body/bodies is/are in general plane motion?
An inside cylinder locomotive has its cylinder centre lines 1 m apart and has a stroke of 1 m. The rotating masses per cylinder are equivalent to 200 kg at the crank pin, and the reciprocating masses per cylinder to 300 kg. The wheel centre lines are 2 m apart. The cranks are at right angles. The whole of the rotating and 2/3 of the reciprocating masses are to be balanced by masses placed at a radius of 0.8 m. Find the value of variation in tractive effort at 300 rpm. Select one: A. ±58476 N B. ±69780 N C. ±79654 N D. ±12475 N
In a swiveling joint mechanism, as shown in figure below, the driving crank OA is rotating clockwise at 200 r.p.m. The lengths of various links are: OA - 50mm; AB = 350 mm; AD = DB; DE = EF = 250 mm and CB - 125 mm. The horizontal distance between the fixed points and C is 300 mm and the vertical distance between F and C is 250 mm. For the given configuration, determine: 1- Velocity of the slider block F 2. Angular velocity of the link DE. And 3. Velocity of sliding of the link DE in the swivel block
Given a fourbar linkage (not drawn in scale) with the link lengths L2 = a = 6 cm, L3 = b = 25 cm, L4 = c = 30 cm, L1 = d = 12 cm and θ2 = 450. For RP = 4 cm, θ3 = 87.80, θ4 = 103.10, δ3 = 450, ω2 = 10 rad/s, ω3 = -7.7 rad/s, ω4 = -5.2 rad/s and α2 = 10 rad/sec2, the angular acceleration of link 3, α3 is equal to
Most gasoline engines in today's automobiles are belt driven. This means that the crankshaft, a rod which rotates and drives the pistons, is timed to the camshaft, the mechanism which actuates the valves, by means of a belt. Starting from rest, assume it takes t=0.0320s for a crankshaft with a radius of r1=3.25cm to reach 1750 rpm. If the belt does not stretch or slip, calculate the angular acceleration of crankshaft 2 of the larger camshaft, which has a radius of r2=6.50 cm, during this time period.
The system shown in the figure consists of two masses attached to a massless road and rotates about the vertical axis at O. The system initially rotating freely at the angular speed of 140 rad/s, when a constant couple moment of CO= 8 Nm is applied on the direction shown.a) Find the time required to stop the assembly.b) Calculate the number of revolutions made until the system stops
The rams of a four-ram hydraulic steering gear are 225 mm in diameter, the rudder stock is 450 mm indiameter, and the distance from the center of the rudder stock to centerline of rams is 800 mm. Calculate thestress (in MPa) in the rudder stock at the instant the rudder is moving past in mid-position and the hydraulicpressure is 80 bar.