Exercise: If you have 100 PC, what is the optimal subnetting you will apply on this Network address: 192.168.20.0/24? Answer the following: 1. No. of subnets 2. Subnet size. 3. No. of IPs in each subnet. 4. Range of IP addresses in each subnet. 5. Net ID of each subnet. 6. Broadcast IP of each subnet.
Q: Subnet the class CIP addresses 195.20.5.0 so that you have 22 subnets. How many host each subnet…
A:
Q: You have been given an IP address block of 192.168.1.0/24. You must provide for existing networks as…
A:
Q: Use the network address 192.168.10.0 to answer the following: a) Subnet mask? b) How many subnets?…
A: Please refer to the following step for the complete solution of the problem above.
Q: Q3/ Discuss the advantages and disadvantages of shielding the copper cables .
A: 3. Network cables are used in communication systems around the world. Using the correct cable will…
Q: Q/ Given a network with 4095 usable equally size Groups and one of the host IP address,…
A: Given : A network with 4095 usable equally size groups and the Host IP address:158.0.0.0\16. A) The…
Q: An organization is to divide the network 192.168.1.0/24 into six subnets. The largest division has…
A: Dear Student, One of the major problem with constant length subnet mask is that a lot of the ip…
Q: 1. Write the required steps to setup a wireless LAN network using your computer. Include screen…
A: Note:- As per our rules, we are allowed to answer only first question of multiple questions or first…
Q: What is the difference between forwarding and routing? b) Who is responsible to add entries in the…
A: TCP - Transmission Control Protocol is responsible for the exchange of messages between the devices…
Q: Which technology will you be using for automatic IP Address
A: INTRODUCTION: Technology use for Automatic IP Address Assignment: DHCP is a networking standard…
Q: Q3-B) identify, which network architecture is preferred for the following states and whyi 1)…
A: NOTE:“Since you have posted a question with multiple sub-parts, we will solve first three subparts…
Q: 78. What is the meaning of Bandwidth in Network? a. Transmission capacity of a communication…
A: Answer :
Q: You are an ISP that is responsible for allocating addresses to different suburbs that has 60…
A: Given network address is 184.222.0.0 a. CIDR for this network Here allocating addresses to…
Q: Consider the following topology. iMac2 wants to send a file to iMac3. iMac2 knows the destination IP…
A: Each device that is integrated into a computer network requires a network adaptor. This adapter…
Q: A network for a local office requires 4 LAN subnets as follows: · Subnet A - North Office with…
A:
Q: With an ip address of 192.10.168.0 and two networks with forty five computers later we will need 2…
A: Hey there, I am writing the required solution of the above stated question.Please do find the…
Q: Attempt all Questions:- Part 1) Assign IP address configuration to the S2 server: part 1 question)…
A: According to the information given:- We have to follow the instruction in order to assign address…
Q: What is the difference between forwarding and routing? Who is responsible to add entries in the…
A: Forwarding refers to a device sending a datagram to the next device in the path to the destination.…
Q: Figure 1 shows two Administrative Systems (AS) assigned with the network 202.2.176.0/21 and…
A: Answer : Name Hosts Needed Hosts Available Network Address Slash Mask Usable Range Broadcast…
Q: Consider the IP address : 157.110.88.0. We need 30 subnets in such a way that each subnet may host…
A: As per bartleby guideline: “Since you have posted a question with multiple sub-parts, we will solve…
Q: The network of Dimension International School is subnetted based on an IPv4 address 192.168.3.0/24.…
A: note - answering only one question at a time network adress - 192.168.3.0 /24 subnet mask…
Q: You have a network that needs to be divided into 29 subnets. How many bits are needed for subnet id?…
A: For dividing network into 29 subnets, we need 5 bits for subnetid. 2^5=32 Option c.5 is the answer
Q: have been allocated a 192.168.10.0 |P address for our network. We need to subnet this into 9 subnets…
A: 192.168.10.0 1. The address belongs to class C IP address. 2. In class C, total number of network…
Q: You have a network that needs to be divided into 29 subnets. How many bits are needed for subnet id?…
A: In the given question, A Network is divided into 29 subnet. No of bit is required ? For any class…
Q: 60- A network for a local office requires 4 LAN subnets as follows: · Subnet A - North…
A:
Q: 1- Using the topology given in the Subnetting.pka file, divide the relevant network into subnets.…
A: Subnetting is the рrосess оf steаling bits frоm the HОST раrt оf аn IР аddress in…
Q: Description Assume that you are a network administrator at World University The University has four…
A: before going on how many IP will be wasted if we don't use VLSM technique first let us understand…
Q: Given the following IP address and Number of computers in the subnet, answer the questions that…
A: Given IP address is 184.222.0.0 and UJ has 30 computers on their network a. What is the CIDR of the…
Q: Dont copy from any source and also from internet I will surely downvote the answer only answer if…
A: The answer is..
Q: IV-Refer to the below exhibit. a- Using 172.16.0.0/16 network address, can we allocate IP's using…
A:
Q: 26 The _field determines the lifetime of IPV6 datagram? :| Choose one a. Type of traffic answer. b.…
A: In IPv6, the field which determines the lifetime of the IPv6 datagram is TTL. TTL stands for Time To…
Q: Consider IP address and answer the following questions; “ 1.1.25/21” and mask is “255.255. 248.0” ,…
A: 1. This is a class A address so number of subnets = 2mask bits - 8 221-8=8192 8192 networks are…
Q: Question 4 Multiple Access Protocols are how nodes regulate their transmission into the shared…
A: We have to answer which multiple access protocols is not a category that multiple access protocols…
Q: QUESTION 1 You were given an IP address of 155.87.0.0 by your ISP and your network admin needed 60…
A: In this question, we are given an IP address, 60 subnets and 600 nodes in each subnet. We are asked…
Q: What subnet mask would you use for the 172.172.0.0 network, such that you can get 300 subnets and…
A: Dear Student, In our question 172.172.0.0 is a class B address as first octet of class B address…
Q: A network for a local office requires 4 LAN subnets as follows: · Subnet A - North Office with…
A: The given address is 192.168.15.0 /24 The subnet mask is /24 which means total number of network…
Q: subnets and hosts a Class C network with the IP address
A: Given :- A Class C network with the IP address and mask of 192.168.10.0/29 is mention in the above…
Q: Q1\ if we have the IP 192.168.0.0/26 1. Find subnet mask? 2. How many subnets I need? 3. How many…
A: “Since you have posted a question with multiple sub-parts, we will solve first three subparts for…
Q: Given the following host requirements and using the IP address 195. 20. 15 points 5.0/18 divide the…
A: The first thing we need to do is order the host requirements from smallest to largest. This gives…
Q: Q3 if we have the IP 172.16.0.0/19 1. Find subnet mask? 2. How many subnets I need? 3. How many…
A: You are mention Dotted Decimal,but you ask find sub Netmask there is no column for subnet mask.I…
Q: A network for a local office requires 4 LAN subnets as follows: · Subnet A - North Office with…
A: The given IP address is 192.168.15.0 /24 Here /24 means number of network bits is 24 and therefore…
Q: An ISP is granted a block of addresses starting with 150.80.0.0/14. The ISP wants to distribute…
A:
Q: What are peer to peer to networks? If we need to connect two PCs directly with each other, what are…
A: A PC network is a gathering of PCs that utilizes a bunch of regular correspondence conventions over…
Q: Q4) For the network in Figure 3, repeat drawing the network on your answering paper and answer the…
A: B)1.There are 2 different networks that are Router and Switch. 2.Need ip address and mac address of…
Q: Q\ draw the network if you have the following requirement:- 1. A LAN with the network address…
A: Given that, Network address of first LAN= 220.3.6.0 Network address of second LAN= 134.18.0.0 WAN is…
Q: You have a subnetwork, 192.168.67.0/24. It is divided into subnet Aand subnet B. Your boss wants to…
A: THE ANSWER IS
Q: An ISP is granted a block of addresses starting with 150.80.0.0/14 . The ISP wants to distribute…
A: The first group has 50 customers, each needs 1024 ip addresses so, each host will contain (log21024)…
Q: Subnet the class C IP addresses 195.20.5.0 so that you have 22 subnets. What is the subnet mask?…
A: 1) The subnet mask is 255.255.255.248 /29 as it's an class C Address with only the last byte 0 so…
Q: 14. (Single-choice) Based on the current IP transport network technology, the most important factor…
A: 14) Answer is a) device forwarding delay
Trending now
This is a popular solution!
Step by step
Solved in 2 steps with 1 images
- Attempt all Questions:- Part 1) Assign IP address configuration to the S2 server: part 1 question) Write IP-Address, Net mask and Default gateway. Part 2) To assign an IP address to the subnet A and to the subnet B you to have subdivide the network 169.1.96.0/19. Please choose a new netmask that subdivide the given network into atleast 3 (one for future use) subnetworks. You want to have a maximum amount of computer in each subnetwork. part 2 question) Write Net-mask (decimal dotted notation), your subnet A IP Address, Your subnet B IP Address, IP address R2 eth1 and IP Address R2 eth2. Part 3) Write down routing table of R1 (Routing table should include Destination, Next hoop and interface) Part 4) Write down routing table of R3 (Routing table should include Destination, Next hoop and interface) You are planning the network of a small company. The network has the address \( 169.1 .0 .0 / 16 . \) T some structure subnet1. If the Network Address to be used is 9.9.0.0, how will you represent the solution? What will be the maximum number of Networks? Maximum Number of Hosts?1500 subnets 2. You are given an IP address of 178.78.0.0 and instructed to subnet into at least 555 subnets and 300 hosts per subnet. How will you do this? Show the solution.Given an IP address 94.0.0.0/20, answer the following questions: I. What is the IP address class? II. Netid and hosted? III. Number of bits borrows? IV. Number of total subnets created? V. Number of bits left? VI. Number of host per subnet? VII. Total of host for all subnets? VIII. The new subnet mask? (after subnetting) IX. Show the subnet address, host range and broadcast address of the first and the last block of the subnet created.
- You have a network, 192.168.212.0/26. It is divided into subnet A and subnet B which have 45 and 55 hosts respectively. Your boss wants to add a third subnet, C, with 61 hosts. Is this possible? If possible, determine the Subnet Mask of the Network, the Network Address of all subnets, the Broadcast Address of all subnets and the usable range of IP addresses within each.With an ip address of 192.10.168.0 and two networks with forty five computers later we will need 2 more networks of the same size. Keep that in mind with creating the networks. Hint: +3 Please provide the subnet addresses, first and last assignable addresses, and masks for all four networks. I asked this question already but, the answer was given with super long addresses. Please dont do that Bonus: Give network addresses also for the four networksQ2 Using this IP address 150.150.55.20 solve the following questions- Which Class this IP related to?- Suppose you use the following subnet mask 255.255.252.0 ,What is the number of hosts exist within a subnet?- What should you do to make each subnet have at least 200 hosts?
- Give Answers to the Following Question. What is the IP address you have used for configuration? Mention the class as well. How many Networks are there in the given Network? How many bits you have borrowed? Mention bits borrowed for each NETWORK. Classify the NETWORKS on basis of same number of IP addresses. Write Subnet Mask of each Network. What is the Minimum power of borrowed bit? Write down first and last usable IP addresses of NETWORK A to E. What is the NETWORK ID and BROADCAST ID for NETWORK H to K. mention for all networks from H to K? What is the total Number of IP addresses and Users present in the whole Network?Solve the following IP address problems:Q1. Given a Class A IP address 110.0.0.0- What is the default subnet mask?- What could you do to divide the network into 4 parts?- How many valid IP address in each part?- Write down the IP addresses for each part of the 4 sub-networksQuestion 5. Write a note on the following a. Compare the header format of IPv4 and IPv6. How tunneling is used to transition fromIPv4 to IPv6?b. Use Dijkstra’s algorithm on the following network to find shortest paths. c. Data 01110001101010100 is received where receiver uses odd parity. Is the data corrupted.Justify your answerd. What are the three main classes of MAC protocols? Explain each a one or two linese. Give steps of ARP mapping from IP to MAC address.
- A network administrator has been asked to create subnets from the given block of IP address 201.201.201.201 /27 Write down all the subnets with the Network address and broadcast address of each Which subnet the given IP address belong to, write down the IP address of the first and the last valid host How OSI layers play their role in the communication between two computers. Discuss. Correctly identify the layers for the items mentioned below. Switch, Router, Hub, TCP, Browser, IP Address, Frame, UTP cable.Consider the IP address : 157.110.88.0. We need 30 subnets in such a way that each subnet may host up to 64 hosts. i) This address is of which type? ii) How many bits will be required for subnet ID? iii) How many usable subnets will be there? iv) What will be the subnet mask? v) What will be the address of 47th host of 25th subnet?An ISP is granted a block of addresses starting with 150.80.0.0/14 . The ISP wants to distribute these blocks to customers as follows:A- the first group has 50 customers, each needs 1024 IP addresses. B- the second group has 4 customers, each needs 512 IP addressesC- the third group has 64 customers, each needs 16 IP addressesSo, Design all the subnets? And find the amount of available IPs after all allocations.