Project 3:OutputEInputB,-Figure.3: Epicyclic gear trains used in differential box in an automobileEpicyclic gear box is shown in Figure.3, the gear box has outer gear C with 110 teeth, B has 40, D has 40 and Ehas 110.1.Calculate the gear box ratio2. Find the output speed and holding torque of the gear box, if the input gear has 1400 rpm clockwise,the input power 25 kW and the efficiency is 70%3. You have engaged in open discussion in which you have to evaluate the conditions needed for anepicyclic gear train to become a differential. Using appropriate schematic and hand sketch show how adifferential works in this application. Also, explain what needed to convert the gearbox in Figure.3 toSimple epicyclic differential

Teeth of the outer Gear C is, Tc=110 Teeth of the Gear B is, TB=40 Teeth of the Gear D is, TD=40…

Figure.3: Epicyclic gear trains used in differential box in an automobile Epicyclic gear box is shown in Figure.3, the gear box has outer gear C with 110 teeth, B has 40, D has 40 and E has 110. Calculate the gear box ratio Find the output speed and holding torque of the gear box, if the input gear has 1400 rpm clockwise, the input power 25 kW and the efficiency is 70% 1. 2.

Figure.3: Epicyclic gear trains used in differential box in an automobile Epicyclic gear box is shown in Figure.3, the gear box has outer gear C with 110 teeth, B has 40, D has 40 and E has 110. Calculate the gear box ratio Find the output speed and holding torque of the gear box, if the input gear has 1400 rpm clockwise, the input power 25 kW and the efficiency is 70% 1. 2.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The figure below shows the power transmitted through a gear drive to multiple output shafts. Gear A is mounted on an electric motor with a rotational speed of 600rpm. Gear A drives a simple gear train consisting in gears B, C, D, and E and transfers the input power to each gear to the shaft on which is mounted. The power delivered from shafts B, C, D, and E are: 8hp, 12hp, 5hp, and 5hp, respectively. For simplicity, all gears have a diametral pitch of 3 and the following numbers of teeth: NA=75, NB=15, NC=120, ND=15, NE=36. The torque on shaft D is most likely: 2015 lb in 105 lb in 250 lb in 630 lb in
The figure below shows the power transmitted through a gear drive to multiple output shafts. Gear A is mounted on an electric motor with a rotational speed of 600rpm. Gear A drives a simple gear train consisting in gears B, C, D, and E and transfers the input power to each gear to the shaft on which is mounted. The power delivered from shafts B, C, D, and E are: 8hp, 12hp, 5hp, and 5hp, respectively. For simplicity, all gears have a diametral pitch of 3 and the following numbers of teeth: NA=75, NB=15, NC=120, ND=15, NE=36. The expected rotational speed on shaft E is most likely: 375 rpm 600 rpm 1250 rpm 3000 rpm
For the gear train illustrated in Figure, determine the output speed and direction of rotation if the input shaft rotates at 1490 rpm clockwise. Gears A to D have a module of 1.5 and gears E to H a module of 2. TA=20 teeth, TD=38 teeth, TE=18 teeth, TG=18 teeth, TH=30 teeth, dB=67.5mm, dC=27 mm and dF =56 mm.
A planetary gear used on the Mars rover uses a 25-tooth helical gear withψ = 20° has a 25° pressure angle in the plane of rotation (figure Q2a). Whatis the pressure angle in the normal plane, ϕn, and the equivalent number ofteeth, Ne? What pressure angle and number of teeth would a straight spurgear tooth of comparable bending strength have?
For the gear mechanism in the figure: P1 = 4 kW, η1 = 1000 rpm, z1 = 18, z2 = 36, z3 = 54, z4 = 108, z1 is the driving gear. Total efficiency values for each stage; Since η12 = η34 = 0.96; Find the output torque and speed of gear z4.
Figure Q4a shows a stage 1 to stage 2 compound gear train through from Gears A, B, C to D. If the input shaft rotates at 650 revolutions per minute (rpm) See below for the number of teeth for Gears A, B, C & D. A motor with a power rating of 1800 Watts is coupled to the input shaft of the pinion (or driver) Gear A as shown in Figure Q4a. Calculate the torque at the input shaft and at the output shaft. Assume no losses and 100% efficiency.
A power of 25 KW is transmitted by a pair of spur gears. Pressure angle= 20, radial force generated is 220 daN, the first gear speed is 600 rpm and the number of teeth is 33, the rotation ratio is 3 and the pitch diameter of the second gear how much?
Provide very clear and complete solution and diagam. SITUATIONAL PROBLEM: Two shafts are connected by spur gears. The pitch radii of the gears A and B are 200 mm and 860 mm respectively. If shaft A makes 350rpm and is subjected to twisting moment of 250 N-m. Pressure angle is 14.5 degree. What is: a.) Rpm of gear B b.) Torque in shaft B (in Newton meter). c.) Separation load of two gears (in newtons). d.) Total load on gears (in newtons).
A spur pinion of pitch diameter 50 mm rotates at 200 rad/s and transmits 3 kW power. The pressure angle of the tooth of the pinion is 20°. find the total force exerted by a tooth of the pinion on other gear?
A flywheel with a moment of inertia of J=1.8 kg*m^2 is on the output ( low speed side ) of a reduction gear with a 3:1 speed ratio. What is the equivalent moment of inertia on the input. ( high speed side ) of the gear if the the gear adds no additional moment of inertia?
The figure shows spur gear wheels consisting of two stages with an electric motor used to drive a rope drum. Engine rpm nm = 970 rpm ; desired speed of drum nT = 50 rpm ;since the drum diameter is DT = 40 cm and the load from the rope is Qh = 4000 N: ⦁ (İt) how much is the total cycle rate? ⦁ z4 find the number of teeth of the drum gear, How much is the drum speed realized in this case? ⦁ find the rotation moment on the drum shaft ⦁ since the collection efficiency of the mechanism is nt = 0.82 How much “ Nm " motor power should be
Find the diameter of each gear using one simple gear train with 4 gears that work as a speed reducer with a ratio of 5:1 Input of 100 rpm, Output of 20 rpm. Consider number of teeth as: N1=20 N2=40 N3=80 N4=100 Use module of 2